aluminium sheet Tenders in Gujarat

2
Archaeological Survey Of India - Gujarat

44788545 mw (cons.) laying new asphalt road in parking area and road widening from main road to ancient site at lothal; 1 execution of work under following items 2 scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lift upto 1 km (by mechanical means) 3 earthwork in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50m and lift up to 1.5m, as directed by engineer in charge. 4 construction of granular sub base by providing close graded material confirming to specifications, mixing in a mechanical mix plant at omc, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of engineer in charge. (with material conforming to grade i (size range 75mm up 0.075 mm) having cbr value 30. 5 providing, laying, spreading and compacting graded stone aggregate (size range 53mm to 0.075mm) to wet mix macadam (wmm) specification, including premixing the material with water at omc in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications and directions of engineer in charge. 6 providing and laying dense graded bituminous macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of engineer in charge. (50 to 100 mm average compacted thickness with bitumen of grade vg 30 @ 5% (percentage by total weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in drum type hot mix plant of 60 90 tph capacity. 7 providing and laying bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per the directions of engineer in charge. (40/50mm compacted thickness with bitumen of grade vg 30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100 120 tph capacity.) 8 providing and laying 2.5mm thick road marking strips (retro reflective) of specified shade / colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of engineer incharge and accordance with applicable specifications 9 providing & fixing glow studs of size 100x20mm made of heavy duty body shall be molded asa (acrylic styrene acryloretrite) or hip (high impact polystyrene) or abs having electronically welded micro prismatic lens with abrasion resistant coating as approved by engineer incharge. the glow stud shall support a load of 13635 kg tested in accordance with astm d4280. the slope of retro reflective surface shall be 35 (+/ 5) degrees to base. the reflective area up each side. the luminance intensity should be as per specification and shall be tested as described in astm i:809 as recommended in bs: 873 part 4: 1973. the studs shall be fixed to the road surface using the adhesive conforming to is, as per procedure recommended by the manufacture complete and as per direction of engineer in charge. 10 manufacturing, supplying & fixing retro reflective sign boards made up of 2mm thick aluminum sheet, (mandatory / regulatory sign boards of 900mm diameter with support length of 3750mm) 11 manufacturing, supplying & fixing retro reflective sign boards made up of 2mm thick aluminum sheet, (cautionary / warning sign boards of equilateral triangular shape having each side of 900mm with support length of 3650mm) 12 provision for installation of 5 meter high street octagonal light poles bottom diameter 130mm, top diameter 60mm & 3mm thick fixed over the base plate 200x200x12 mm and finishing coats of hot dip galvanized with 1 meter single arm galvanized bracket of sleeve & arm pipe. pole fixed over the foundation bolts with necessary fittings, charges of excavation, cement concreting, transportation & installation charges, necessary underground piping with cabling charges, cost of philips or equivalent brand smart bright 45w street light (cool white, grey) standard with all necessary fittings etc. complete as directed by engineer in charges. ...

Due Date : September 06, 2024

Tender Value : ₹ 40.35 Lakhs

View Tender
3
Western Railway - Gujarat

44638159 supply of retro reflectiveretro reflective,retro reflective type warning board for neutral section 500 m of size 450x750x2 mm (pasted with non reflective she et in blue colour and letters/symbols of retro reflective type iv high intensity prismatic sheeting in white colour) conforming to rdso specification.no. eti/ohe/33a (12/97) rev 8 or latest and similar to rdso drg. no.re/33/347 mod b or latest. (note:material to b e supplied at sse/trd railway office, adesar, near cpwi office railway station road, adesar, gujarat 370155, (mob 6353532792) ) [ warranty period: 30 months after the date of delivery ] ] , retro reflective type warning board for neutral section 250 m of size 450x750x2 mm (pasted with non reflective she et in blue colour and letters/symbols of retro reflective type iv high intensity prismatic sheeting in white colour) conforming to rdso specification. no. eti/ohe/33a (12/97) rev 8 or latest and similar to rdso drg. no.re/33/355 mod b or latest. (note: material to be supplied at sse/trd railway office, adesar, near cpwi office railway station road, adesar, gujarat 370155, (mob 635353279 2)) [ warranty period: 30 months after the date of delivery ] ] , retro reflective type staff caution board (3 language hindi, english, gujarati) size: 700mmx400x2mm as per rdso spec. no. eti/ohe/33a (12/97) rev 8 or latest and similar to rdso drg no.re/33/p/7561. (note: material to be supplied at sse/t rd railway office, adesar, near cpwi office railway station road, adesar, gujarat 370155, (mob 6353532792)) [ warranty perio d: 30 months after the date of delivery ] ] , retro reflective type dj open board as follows, switch off power plate made up of 2 m m aluminium sheet of size 800 x 400 mm pasted with non reflective sheeting of blue colour. letters / symbols of retro reflective colour, letters/symbols of retro reflective type iv high intensity prismatic sheeting in white colour as per rdso spec. no. eti/ohe/33a (12/97) rev.8 or latest and similar to rds o drg. no. ...

Due Date : August 30, 2024

Tender Value : ₹ Ref. Documents

View Tender
5
Arcelor Mittal Nippon Steel India Limited - Gujarat

44121463 tender for insulation and cladding work for cgl#3 & cgal 27021140 10 10 10 fixing of insulation work with cladding 3,000 m2 email : sandeep.patil@amns.in contact : name : sandeep patil item details : scope of the contractor related to the fixing insulation and cladding on tanks, ducts, and pipes: 1. erection of insulation and cladding on equipment’s, tanks, ducts, and pipes in cgal as per specification and drawings provided by oem. 2. rockwool mat (pro rox 960) (50 100) mm thk, with galvanised steel mesh and ss stitching wire density 100 kg/m³, with wire net and self tapping screws, aluminium sheet cladding. 3. providing skilled <(>&<)> sufficient manpower like supervisors, technicians, riggers, scaffolders, helpers to complete job in given period. 4. all the required tools, tackles, machines with consumables will be in scope of contractor. 5. insulation work will be in different sections of line at different heights from 0 to 30 meters. 6. preparation of proper scaffolding platforms as per amns safety standards for insulation work will be in scope of contractor along with certified scaffold inspector. 7. all the work required to complete the job in totality but not mentioned in sow will be in scope of contractor. 8. shifting of insulation material from storage location to cgal site. 9. open package inspection of each package with oem <(>&<)> am/ns. 10. preparation of job procedure/itp/ wps/pqr for work to be submit before commencement of work. 11. supply of welding machines, grinding machines, welding electrodes, grinding wheels. (welding rods must be procured from approved vendors by amns) 12. co ordinate with am/ns and equipment supplier for the planning of sequential and quality work execution in accordance with the best engineering practice. 13. preparing <(>&<)> taking handing over protocols with mechanical erection contractor. 14. contractor must store material properly at site and maintain proper housekeeping of working area <(>&<)> shift unwanted material at designated place. 15. all required consumables like gas cutting cylinders (oxygen <(>&<)> da), welding rods of all types (welding rods make must be approved from amns), cutting wheels, highspeed vibrator with leads <(>&<)> needles, brick cutter <(>&<)> muller (with hot standby mixture) etc in scope of contractor. 16. sufficient illumination to be maintain when work is in progress. lightening arrangement to be done by contractor, supply sufficient number of lamps, portable fans etc will be scope of contractor. fans <(>&<)> lamps must confirm safety standard of amns. 17. resources deployment plan to be submit as per requirement of project. 18. working hour for contactor’s manpower will 24 x 7, or as per requirement of site condition. sunday will be working day. 19. preparation of proper scaffolding platforms for height works including railings, toe guards. scaff holding material as per amns standard and certified scaffolding inspector. safety nets to be deploy at height work safety net must confirm to is: 11057 1984, max size of net opening 10cm x 10 cm and make should be karam or equivalent. safety page 2 of 6 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000116371 date 08.07.2024 submission date 15.07.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. animesh mishra contact email animesh.mishra@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details harness should contain standard double lanyard to carry tools <(>&<)> tackles while working at height. 20. all workers will deploy to height work must having height pass certified by am/ns. 21. working inside equipment/tanks must confirm to confined space entry safety protocol of amns. 22. contractor supposed to be carried out activity within sops <(>&<)> reference documents provided by am/ns are available in this link https://www.amns.in/safety/. contractor must give confirmation while submitting offer. general points 1. contractor shall depute adequate number of staff, supervisors, skilled, semi skilled <(>&<)> un skilled labours to execute the job as per the time schedule. adequate number of safety supervisors. they must execute the job in coordination with oem <(>&<)> am/ns team. 2. a qualified safety manager to be deployed with complete safety org chart. 3. a qualified <(>&<)> competent qa/qc engineer to be deployed to meet qa/qc standard of amns. 4. contractor shall arrange all necessary statutory requirements such as pf, esic, insurance, labour license for workmen <(>&<)> staff. 5. contractor shall arrange necessary accommodation and local conveyance for workmen <(>&<)> staff. 6. contractor must follow the safety rules of am/ns. 7. opening of the boxes of the material in contractor scope. 8. packing list received from material boxes to be submitted to amns. loose items to be kept properly in rack/boxes. 9. proper housekeeping of the erection area in contractor scope. 10. contractor shall provide all the personal protective items like boiler suit, frp helmet, safety shoes, reflective jacket, goggles, hand gloves, mask to all the team members according to the requirement and ensure 100% use of the same. 11. all erection and related work shall be carried out by the contractor according to the equipment supplier’s drawings/documents. 12. am/ns will provide the required drawings/ documents of the equipment required for the erection. the contractor shall return the same after completion of job. 13. all staff, supervisors, workmen should be provided with uniform <(>&<)> boiler suit and uniform must wear while working on site. 14. unwanted <(>&<)> scrape material to be shift by contractor to designated place. information to be provided in the technical offer – technical offer should have the following information’s – 1. confirmation of all the points mentioned in am/ns inquiry. 2. quality assurance plan. 3. manpower deployment plan. 4. list of tools <(>&<)> tackles to be deploy. 5. reference list for similar kind of jobs done. primary hse requirementinitial documents required to start work: 1. hse plan (approved by your project manager) 2. sop (standard operating procedure) of activities approved by project manager / hse manager. 3. hira (hazard identification and risk assessment) of activities. 4. tool and tackles third party inspection certificates. 5. dedicated safety manager should depute at site with organogram of company. 6. communication contact details with mobile no. /email id. 7. list of vehicle/equipment/machines with tpi and other relevant legal page 3 of 6 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000116371 date 08.07.2024 submission date 15.07.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. animesh mishra contact email animesh.mishra@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details documents. 8. list of available emergency equipment on site like fire extinguisher, first aid box, emergency torch, megaphone etc. 9. mandatory ppe’s <(>&<)> safety materials with their test certificates. 10. scaffolding team’s (scaffolders/scaffold supervisor/scaffold inspector) adequate certification <(>&<)> experience letter(note the scaffolding team will be screened by our team to verify their competency level.) scaffolding material must be approved <(>&<)> certified by tpi. some other focused requirements are as below: 1. all workers coming at site with adequate and appropriate ppe’s. 2. daily tbt must be done by site engineer in presence of safety person. 3. report all incidents and near miss andconduct mock drill every month. 4. take work permit as per amns ptw system, and no work allowed without work permit. 5. a permit box must be available at site. 6. all new workers must be gone through safety induction by your safety person and safety induction card must be available with person at site. 7. proper rest sheds for workers and rain cover shed for electrical equipment. 8. in case of any lifting work, no one allowed under the suspended load. 9. in case of working at height, valid height pass required as per amns norms. 10. make designated assembly point on site and valid first aid box available on site. 11. alcohol, tobacco, and smoking is strictly prohibited on site. 12. use of mobile phone is restricted while entering in plant. 13. all electrical equipment’s must have protected with proper earthing and elcb/rccb. 14. only one team allowed at same level (parallel activity) to avoid injury from trip, fall of material to anyone. 15. inform work planning with manpower availability to amns safety team before one day in case of sunday, holiday. 16. area must be barricaded during height work. 17. make one separate training/induction area for workers at site. 18. only 3 pipe type torches shall be used in gas cutting set. 19. compressed gas cylinders must have separate yard for empty/full and as per category with 6m distance from one to another type andalways tied with chain in vertical straight position. 20. soap solution bottle must be put on compressed cylinder (da allowed) trolley, yard, and check before starting the work. 21. gas cutting set must be kept in adequate trolley only. 22. farana/trailer operator/driver must wear reflective jacket, fa box and fire extinguisher always available in good condition. 23. loto kit required in energy isolation work. 24. daily checklist must be filled by farana/crane/heavy equipment by operator, site engineer and amns representative before starting the work. 25. certified first aider must be available at site or trained your team member by competent agency of first aid and share firs aid certificate with amns safety team. 26. safety motivational program must be done in every month for workers. 27. height register must be maintained at site during work. 28. during working hours one vehicle must be available at site for emergency case. 29. all formats of training, safety committee meeting, mock drill will be of amns. 30. every week and month proper submission of training records and reports. 31. every thursday you must submit weekly safety observation sheet and on wednesday submit good practices/ safety initiative/improvement in site. 32. at height, standardtool lanyard and standard tool bag must be page 4 of 6 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000116371 date 08.07.2024 submission date 15.07.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. animesh mishra contact email animesh.mishra@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details ensured for safe handling <(>&<)> avoid falling of material/tool from height. 33. all rotating parts must be covered by safety guards. 34. walkie talkie required is mandatory for communication during working at height. 35. body earthing must be available in porta cabin, welding machines and other electrical equipment. 36. follow age of equipment policy and colour coding of tools and tackles as per amns standard and guidelines in amns checklist and submit. 37. don’t store any diesel or fuel in stores at site. 38. every hot work site required individual fire extinguisher and one fire point (fire buckets, fire extinguishers c02, dpc) must be available at site. 39. make designated assembly point with display at site. 40. no chain allowed for lifting. only web sling or wire rope sling is applicable for lifting. 41. submit tbra before night work started and inform to amns safety team. (if plan) 42. only frp helmets allowed at site. 43. each worker shall be provided with cover all/boiler suit. 44. identification numbers on each tools and tackles are compulsory on site. 45. every 50 manpower needs 1 safety officer present at site with megaphone. 46. only industrial type ladder with flat rungs is allowed in site. 47. wheel stopper required in each vehicle. 48. proper earthing pit (as per amns electrical department) with testing details displayed on site. 49. no smoking board displayed at required location. 50. availability of sufficient fire blanket. 51. hose and cable for gas cutting work should be of esab brand. 52. site layout must be displayed at project site <(>&<)> electrical cable laying diagram must be displayed on each db. 53. adequate number of emergency rescue kit should be available at site with trained rescuers. 54. transportation means for workmen must be bus or any closed vehicle only. unsafe transportation is prohibited. 55. retro reflective strips shall be pasted on each vehicle/equipment body. 56. safety officer, electrician and site engineer must be available at site during working hours in day/night. 57. safety officer’s final interview will be taken by amns hse representative and safety officer must have relevant work experience and qualifications. please find the below mandatory requirements which shall be ensured before proceeding for height work test: 1. the minimum age of joining of personnel for working at height is minimum 20 years and maximum 45 years. 2. the minimum qualifications of personnel are that he should be a literate (at least he can read the local or national language). 3. the minimum work experience of the personnel is 2 years. 4. he should be medically fit(the person should be free from acrophobia, vertigo, and fits. he should be having normal bp, sugar <(>&<)> ecg report)and should possess a valid medical fitness certificate for work at height jobs from care hospital atarcelormittal nippon steel india,hazira complex (cnh)before undergoing safety induction training <(>&<)> competency assessment for work at height. all the height workers’ medical fitness certificate along with reports shall be submitted to us. after successfully completion of competency assessment, a copy of their induction card <(>&<)> height pass shall page 5 of 6 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000116371 date 08.07.2024 submission date 15.07.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. animesh mishra contact email animesh.mishra@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details also be submitted without any delay. note: the above mentioned guidelines along with other hse requirements shall be adhered or else adequate action will be taken as per amns guideline (safety code for contractors, hse contractual penalty guideline – amnsil/ps/hcpg <(>&<)> consequence management – amns/safe/57/sop) general points related to scaffolding: 1. prior to start any scaffolding related activity, it is mandatory to submit scaffold materials quantity and tpi along with safe work method for the same. it will help in smooth monitoring and accountability of scaffold material. 2. amns will consider only certified scaffold inspector after verifying his certificate, training, and knowledge. so, deploy a scaffolding inspector with valid certification and adequate knowledge. 3. base plate (100 x 100 x 3 mm) is mandatory for every vertical pipe while making a scaffolding. sole plate shall also be used at all unpaved area to support base plate. 4. a scaffolding platform will only be considered as fully safe after provision of all the minimum mandatory requirements/supports. 5. provision of access ladder, top <(>&<)> mid hand railing, toe board and tagging system is mandatory for each <(>&<)> every scaffolding structure. 6. appropriate barricades shall be installed to protect people in the vicinity during scaffold erection, use, modification, and dismantling. as far as practicable, barricades shall be provided by keeping a clear distance of 1.0 meter from scaffold structure. 7. fall protection when erecting, dismantling, and modifying scaffolds shall be under the direction of a competent person (scaffold supervisor/inspector). 8. scaffolds shall be designed to support at least 4 times of the anticipated weight of men/material. 9. scaffold shall be constructed at least 2 planks wide (minimum) at all the sides. onlyanti skidtype planks are allowed to be used for scaffolding structure. 10. during the erection stage of a scaffold, warning notices with the wordingscaffold incomplete, don not useshall be fixed to all the scaffold access points. 11. the status board with the wordingscaffold complete, safe for useshall be displayed when the scaffold is ready to use. 12. once erected the scaffolding shall be inspectedevery weekand recorded. scaffold after due date of inspections shall not be permitted for use without re inspection by the scaffolding inspector. 13. both erection <(>&<)> removal of scaffold shall be done through permit to work. 14. person who uses scaffold shall be trained. he shall know the safe work practices to be performed, able to assess the hazards and can take proper protective measures. 15. any non standard or damaged material shall not be used on the scaffold. those materials shall immediately declare as scrap. 16. all the material used shall be up to the amns standard and shall only be used as per its designed/designated place. any alteration shall be approved from a competent person before implying it on ground. 17. toe board shall be fixed at the platform to restrict fall of materials/person. 18. permit to work at height is mandatory for working on a scaffolding platform. also, the person working on the platform shall have valid height pass and full body harness with them. 19. contractor supposed to be carry out activity within sops <(>&<)> reference documents provided by am/ns are available in this link https://www.amns.in/safety/. contractor must give confirmation while submitting offer. page 6 of 6 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000116371 date 08.07.2024 submission date 15.07.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. animesh mishra contact email animesh.mishra@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details exclusions from contractor’s scope: 1. drawings, qap approved document, delivery schedule will be provided by amns. 2. insulation and cladding material will be supplied by amns. 3. electrical power <(>&<)> water at single point at cgal line...

Due Date : July 15, 2024

Tender Value : ₹ Ref. Documents

View Tender
7
Western Railway - Gujarat

44062573 supply of aluminium sheet of size 1220 mm x 2440 mm x 3 mmaluminium sheet of size 1220 mm x 2440 mm x 3 mm,aluminium sheet of size 1220 mm x 2440 mm x 3 mm thick conforming to is: 737:2008. (fourth revision), designati on 19000, condition h x 2. [ warranty period: 30 months after the date of delivery ] => limited...

Due Date : July 22, 2024

Tender Value : ₹ Ref. Documents

View Tender
10
Western Railway - Gujarat

43417137 supply of aluminium sheetaluminium sheet,aluminium sheet of size 1220 mm x 2440 mm x 2 mm thick to bis specification is : 737:2008 (forth revision) with amendment 1 of dec 2016 and 2 of feb 2022, designation:1 9000 h2. [ warranty period: 30 months after the date of delivery ]...

Due Date : May 25, 2024

Tender Value : ₹ Ref. Documents

View Tender
12
Western Railway - Gujarat

43300721 supply of aluminium sheetaluminium sheet,aluminium sheet of size 1220 mm x 2440 mm x 2 mm thick to bis specification is : 737:2008 (forth revision) with amendment 1 of dec 2016 and 2 of feb 2022, designation:1 9000 h2. [ warranty period: 30 months after the date of delivery ]...

Due Date : May 08, 2024

Tender Value : ₹ Ref. Documents

View Tender
13
Western Railway - Gujarat

43256371 supply of aluminium sheet of size 1220 mm x 2440 mm x 2 mm thick to bis specification is : 737:2008 ( forth revision ) with amendment 1 of dec 2016 and 2 of feb 2022, designation:1 9000 h2. [ warranty period: 30 months after the date of delivery ] ...

Due Date : May 07, 2024

Tender Value : ₹ Ref. Documents

View Tender
14
Gujarat State Electricity Corporation Limited - Gujarat

43092777 tender for removal, application of mineral wool thermal insulation & supply, application of aluminum sheets with required materials for various pipes, valves, bends, vessels etc. of turbine & its auxiliaries and spray insulation on turbines of tdbfps of 500 mw unit no.6 of utps on “as and when required” basis. (tmd 6)...

Due Date : April 16, 2024

Tender Value : ₹ 9.79 Lakhs

View Tender
15
U N Mehta Institute Of Cardiology And Research Centre - Gujarat

43063014 e tender for rate contract for fabrication / erection work and material supply for u. n. mehta institute of cardiology & research centre 1 g.i. sheet plain isi standard make. 18 swg 2 g.i. sheet plain isi standard make 20 swg 3 g.i. sheet plain isi standard make 22 swg 4 wire guage of 56mm square and 3 mm thick jali isi standard make 5 m.s. weld mesh jali 3mm thick 25 x 50 sqar isi standard make 6 g.i. hexagonal chicken mesh jali isi standard make 7 g.i. chain link jali 12 / 14 / gauge isi standard make 8 g.i. wire gauge of 0.71mm jali to 16x26 guage ( mosquito proof ) isi standard make 9 m.s. flat, equal angle & unequal angle of tata, jindal kamdhenu brand 10 m.s. channel, joints, tee, gusset plate, girder etc. of tata, jindal kamdhenu brand 11 m.s square / rectangle / circular tube / pipe 2mm thick. of any size tata, jindal kamdhenu brand 12 0.8mm thick corrugated g.i. sheet class 3, isi standard make 13 0.8mm thick semi circular g.i. sheet class 3, isi standard make 14 g.i. seam bolts and nuts all size mix, isi standard make 15 g.i. plain washer all size mix , isi standard make 16 g.i. bitumen washer all size mix, isi standard make 17 g.i. j or l hooks all size mix, isi standard make 18 corrugated a. c. sheet isi standard make 6mm thick 19 corrugated a. c. sheet isi standard make 8mm thick 20 plain a.c. sheet 5mm thick everest / isi standard make 21 frp plain sheet isi standard make 2mm thick plain / design 22 frp corrugated isi standard make 2mm thick plain / design 23 frp corrugated isi standard make 3mm thick plain / design 24 poly carbonate grid base 5mm thick sheet of any color standard make 25 m.s chequered plate ( 2mm to 8mm thick ) isi standard make 26 s.s 304 plain / chequered plate ( 2mm to 8mm thick ) isi standard make 27 s.s. 304 flat, equal angle & unequal angle of isi standard make 28 s.s 304 square / rectangle / circular tube / pipe 2mm thick. of any size isi standard make 1 welder with necessary welding machine and cutting set with all required tools tackles per day , 8 hours 2 helper with required tools. for per day , 8 hours 3 rigger with required tools. for per day , 8 hours 4 welder with necessary welding machine and cutting set with all required tools tackles for ss works per day , 8 hours 5 providing hydra machine / crane with skill operator, inclusive fuel for operation, for any fabrication work and relevant work up to 15 ton for per day 8 hours. 1 providing, fabricating and erecting steel beam , column, truss, angles, pipe, rods, sheet etc of tata, kamdhenu, zindal, essar ( arcelormittal nippon steel india ) for misc. work welded, in built up sections, framed work including cutting, hoisting, fixing in position if required machine sheet bending and applying a priming coat of red lead paint. using beams column and any shape and design given by the engineer incharge. 2 providing, fabricating and erecting s.s 304 angles, pipe, rods, sheet etc of isi standard make for misc. work welded, in built up sections, framed work including cutting, hoisting, fixing in position if required machine sheet bending using any shape and design given by the engineer incharge 3 prov. and fixing in position collapsible steel shutters of tata, jindal kamdhenu brand with vertical channels 20 x 10 x 2mm braced with flat iron diagonals 20 x 5mm size with top and bottom rails of t iron 40x40x6 mm with 35mm dia. steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles incl. applying a priming coat of red lead paint and any shape and design given by the engineer incharge 4 providing and fixing rolling shutters of approved make made of 80mm wide m.s. laths inter locked together through their entire length and jointed together at the ends by end locks mounted on specially assigned pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push pull operation incl. the cost of hood cover and spring etc. of tata, jindal kamdhenu brand complete. and any shape and design given by the engineer incharge 5 only removing of fabricated structural steel work of any design and staking the same in reusable condition as instructed with all height, tools tacles, scaffolding etc complete 6 only erection of old steel structures as per given design and modification at all height including all tools tackles labours transportation up to work site etc. as instructed by engineer incharge 7 removing and refixing of old steel structures with frp sheet, drain gutter of shed as per given design and refixing after modification at all height including all tools tackles, laboures transportation up to work site etc. excluding truss and column complete as instructed by engineer incharge 8 providing and fixing corrugated g. i. sheets of tata, zindal, kamdhenu, essar ( arcelormittal nippon steel india ) for its equivalent for roofing fixed with galvanized iron j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washer filled with white lead complete excluding the cost of purlines, rafters and trusses. 0.80 mm thick sheet complete as instructed by engineer incharge 9 providing and fixing ridges or hips 600 mm as per given design overall in plain g.i. sheet of tata, zindal, kamdhenu, essar ( arcelormittal nippon steel india ) for its equivalent for fixed with g.i. j or l hooks, holts and nuts 8 mm dia g.i. limpet and bitumen washer complete. 0.80 mm thick sheet complete as instructed by engineer incharge 10 providing and fixing. asbestos corrugated cement sheets of evarest or its equivalent make for roofing fixed with g.i. plain and bitumen washer complete excl. the cost of purlins, rafters and trusses complete as instructed by engineer incharge . 6mm thick 11 providing and fixing. plain asbestos plain cement sheets of evarest or its equivalent make for roofing fixed with g.i. plain and bitumen washer complete excl. the cost of purlins, rafters and trusses complete as instructed by engineer incharge . 6mm thick 12 providing and fixing frp plain / design sheets for roofing fixed with sealant at all joints complete including sample approval and test for no water leakages excluding the cost of purlins, rafters and trusses complete as instructed by engineer incharge 3mm thick 13 providing and fixing poly carbonate sheets 2mm thick for roofing fixed with sealant at all joints complete including sample approval and test for no water leakages including the cost of purlins, rafters and trusses complete as instructed by engineer incharge. 14 only fixing. for roofing fixed with sealant complete including sample approval and test for no water leakages excluding the cost of purlins, rafters and trusses complete as instructed by engineer incharge. frp plain / design sheets 15 only fixing. for roofing fixed with sealant complete including sample approval and test for no water leakages excluding the cost of purlins, rafters and trusses complete as instructed by engineer incharge. ac / acc sheet roofing 16 only fixing. for roofing fixed with sealant complete including sample approval and test for no water leakages excluding the cost of purlins, rafters and trusses complete as instructed by engineer incharge gi sheet roofing 17 only fixing. for roofing fixed with sealant complete including sample approval and test for no water leakages excluding the cost of purlins, rafters and trusses complete as instructed by engineer incharge alluminium sheet roofing 18 only fixing. for roofing fixed with sealant complete including sample approval and test for no water leakages excluding the cost of purlins, rafters and trusses complete as instructed by engineer incharge poly carbonate sheet roofing 19 providing and fixing plain asbestos sheet of evarest or its equivalent make for lining with butt joining and wood screws inclusive of frame work and cover fillets complete as instructed by engineer incharge 6.5 mm. thick 20 providing and fixing 75 mm diameter pvc rain water spout of 90cms. long complete. 21 dismantling of sheet roofing incl. ridges, hips, valleys, gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor. complete as instructed by engineer incharge g.i. sheet roofing 22 dismantling of sheet roofing incl. ridges, hips, valleys, gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor. complete as instructed by engineer incharge ac / acc sheet roofing 23 dismantling of sheet roofing incl. ridges, hips, valleys, gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor. complete as instructed by engineer incharge frp sheet roofing 24 dismantling of sheet roofing incl. ridges, hips, valleys, gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor. complete as instructed by engineer incharge alluminium sheet roofing 25 dismantling of sheet roofing incl. ridges, hips, valleys, gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor. complete as instructed by engineer incharge poly carbonate sheet roofing 26 dismantling and refitting of sheet roofing incl. ridges, hips, valleys, gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor complete as instructed by engineer incharge . g.i. sheet roofing 27 dismantling and refitting of sheet roofing incl. ridges, hips, valleys, gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor complete as instructed by engineer incharge ac / acc sheet roofing 28 dismantling and refitting of sheet roofing incl. ridges, hips, valleys, gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor complete as instructed by engineer incharge frp sheet roofing 29 dismantling and refitting of sheet roofing incl. ridges, hips, valleys, gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor complete as instructed by engineer incharge alluminium sheet roofing 30 dismantling and refitting of sheet roofing incl. ridges, hips, valleys, gutters etc. stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor complete as instructed by engineer incharge color coated sheet roofing 31 only dismantling of sheet roofing stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor complete as instructed by engineer incharge . g.i. sheet roofing 32 only dismantling of sheet roofing stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor complete as instructed by engineer incharge. ac / acc sheet roofing 33 only dismantling of sheet roofing stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor complete as instructed by engineer incharge. frp sheet roofing 34 only dismantling of sheet roofing stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor complete as instructed by engineer incharge. alluminium sheet roofing 35 only dismantling of sheet roofing stacking of serviceable materials and disposal of unserviceable materials with all lead and lift for all floor complete as instructed by engineer incharge .poly carbonate sheet roofing 36 dismantling steel work incl. dismembering and stacking the materials with all lead and lift for all floor complete as instructed by engineer incharge. 37 dismantling and refitting doors, windows, ventilators etc. ( wood or steel ) shutters incl. chowkhats, architraves, holdfastess and other attachment etc. complete and stacking them within all lead and lift for all floor complete as instructed by engineer incharge . not exceeding 3 sq. m. in area 38 dismantling and refitting doors, windows, ventilators etc. ( wood or steel ) shutters incl. chowkhats, architraves, holdfastess and other attachment etc. complete and stacking them within all lead and lift for all floor complete as instructed by engineer incharge exceeding 3 sq. m. in area 39 providing and fixing g.i. 12 / 14 gauge wire fencing with 2.00 metre long m.s. angle posts 40mm x 40mm x 6mm and oil painting 3 coats, fixed at 2.5 mt. c / c with five horizontal lines and two diagonals of galvanized steel barbed wire weighing 9.38 kg. per 100 metre, strained and fixed to posts with g.i. staples, incl. fixing the post in ground with 0.5m.x 0.5m.x0.5m. block in c.c. 1.5:10 etc. complete as instructed by engineer incharge 1.20 mtr height 40 providing and fixing g.i. 12 / 14 gauge wire fencing with 2.00 metre long m.s. angle posts 40mm x 40mm x 6mm and oil painting 3 coats, fixed at 2.5 mt. c / c with five horizontal lines and two diagonals of galvanized steel barbed wire weighing 9.38 kg. per 100 metre, strained and fixed to posts with g.i. staples, incl. fixing the post in ground with 0.5m.x 0.5m.x0.5m. block in c.c. 1.5:10 etc. complete as instructed by engineer incharge 1.50 mtr height 41 providing and fixing 1.20 metre high chain link fencing with 2.00 metre long m.s. angle posts 40mm x 40mm x 6mm and oil painting 3 coats, fixed at 2.5 mt. c / c with five horizontal lines and two diagonals of galvanized steel barbed wire weighing 9.38 kg. per 100 metre, strained and fixed to posts with g.i.staples, incl. fixing the post in ground with 0.5m.x 0.5m.x0.5m. block in c.c. 1.5:10 etc. complete complete as instructed by engineer incharge 1.20 mtr height 42 providing and fixing 3 mm thick frp sheet ( any colour and any design ) shed with garden net or bamboo or different design, material used for frp sheet is vecro tax choped mat and roof light resin. vertical pipe size will be 3” x 3” square m.s. pipe ( 18 to 20 gauge ) not more than 15’ c / c, structure 1.5” x 1.5” square m.s. pipe ( 18 to 20 gauge ) at 2’x2’ square pattern. including necessary fittings and fastening, three coats of enamel paint to pipe, fiber rain water system channel or pipe up to 100mm diameter complete as instructed by engineer incharge fiber shed 43 providing and fixing of partition tobe made from 10 mm thick cement fiber sheet on bothside of skeleton, skeleton will be made from 40 x 20 and 20 x 20 mm m.s. tube section overall thickness of parition will be 100 mm to 200 mm as per site situation complete as instructed by engineer incharge. 44 colour coated roofing : providing and fixing of roofing tobe made from colour powder coated tata make sheet with s.d.s.t. screw on existing structure complete as instructed by engineer incharge . 45 pvc u.v. stabilise roofing : providing and fixing of roofing tobe made from 1.3 mm thick u.v. stabilise pvc corrugated sheet with s.d.s.t. screw on existing structure complete as instructed by engineer incharge . 46 providing and fixing weld mess jali in ventilation window with necessary fitting with screw / welding etc. complete as instructed by engineer incharge 47 providing and fixing g.i. mosquito jali in ventilation, window, door or any other structure etc. with necessary fitting complete as instructed by engineer incharge...

Due Date : April 29, 2024

Tender Value : ₹ 15 Lakhs

View Tender
17
Urban Development And Housing Department - Gujarat

42995559 bids are invited for 1 light source high power led 2 make of led lamps any manufactures registered with r &b state under cat iii 3 lighting distribution type cut off / semi cut off type as per iesna type ii / iii lighting distribution. 4 luminary efficacy >100 lm / w + / 5 % 5 operating voltage range 140 280v 6 operating voltage 230v + / 10% 8 operating frequency 50 hz + / 3% hz 9 total harmonic distortion current < 15%; voltage < 5% 10 power factor >= 0.95 11 operating current <700 ma 12 usage hours dusk to dawn ( 12 hours ) 13 audible noise shall have class a sound rating with audible noise in power supply 14 beam angle 120 degrees ( minimum ) 15 life span 50000 burning hours with 80% lumen maintenance 16 color temperature 5500 6000k ( suitable for “cool white” light ) for access road street lighting and 3500 4000k for the utility plant street lighting. 17 color rendering index ( cri ) min. 70 18 uniformity ratio ( emin / eavg ) 60% 19 transverse uniformity ratio ( emin / emax ) 40% 20 ingress protection ip 66 for street lighting driver: 21 driver efficiency >90% 22 optical efficiency > 95% 23 p / n junction temperature <100 degrees c at junction point and <60 at heat sink. 24 surge immunity level 4.5 kv 25 earthing driver unit shall have provision for proper grounding 26 short circuit protection recovers automatically after fault condition is removed. 27 over voltage protection should be able to withstand 320v for minimum 24 hours 28 high – low voltage cutoff in side luminary or a device to be installed on the pole in an ip protected box sustaining 270v for higher side cutoff & 140 v on lower side cutoffbeyond& below it shut down & restore normal working condition when voltage 29 housing with supplier word mark / name engraved / embossing on the die cast housing / body part 30 connecting wires & cables used frls three core copper wire of 2.5 mtr outside luminaire 31 impact resistance of complete luminaire ik 05 or above 32 finish aesthetically designed housing with powder coated corrosion resistant housing 33 working temperature 20 degree to 50 degree 34 working humidity 10% to 90% rh 35 housing the fixture should comprise of a top canopy made of di cast high pressure aluminum alloy of adequate thickness and a lower part comprises of uv resistant acrylic bowl top frosted for visual comfort 36 construction leds are mounted on a circular / array mcpcb which is thermally glued to an aluminum sheet provided with aluminum fins firmly connected to the housing for excellent heat dissipation ( q3 ) total quantity : 40...

Due Date : April 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
18
Urban Development And Housing Department - Gujarat

42995553 bids are invited for 0 luminaries wattage 200w 1 light source high power led 2 make of led lamps any manufactures registered with r &b state under cat iii 3 lighting distribution type cut off / semi cut off type as per iesna type ii / iii lighting distribution. 4 luminary efficacy >100 lm / w + / 5 % 5 operating voltage range 140 280v 6 operating voltage 230v + / 10% 8 operating frequency 50 hz + / 3% hz 9 total harmonic distortion current < 15%; voltage < 5% 10 power factor >= 0.95 11 operating current <700 ma 12 usage hours dusk to dawn ( 12 hours ) 13 audible noise shall have class a sound rating with audible noise in power supply 14 beam angle 120 degrees ( minimum ) 15 life span 50000 burning hours with 80% lumen maintenance 16 color temperature 5500 6000k ( suitable for “cool white” light ) for access road street lighting and 3500 4000k for the utility plant street lighting. 17 color rendering index ( cri ) min. 70 18 uniformity ratio ( emin / eavg ) 60% 19 transverse uniformity ratio ( emin / emax ) 40% 20 ingress protection ip 66 for street lighting driver: 21 driver efficiency >90% 22 optical efficiency > 95% 23 p / n junction temperature <100 degrees c at junction point and <60 at heat sink. 24 surge immunity level 4.5 kv 25 earthing driver unit shall have provision for proper grounding 26 short circuit protection recovers automatically after fault condition is removed. 27 over voltage protection should be able to withstand 320v for minimum 24 hours 28 high – low voltage cutoff in side luminary or a device to be installed on the pole in an ip protected box sustaining 270v for higher side cutoff & 140 v on lower side cutoffbeyond& below it shut down & restore normal working condition when voltage 29 housing with supplier word mark / name engraved / embossing on the die cast housing / body part 30 connecting wires & cables used frls three core copper wire of 2.5 mtr outside luminaire 31 impact resistance of complete luminaire ik 05 or above 32 finish aesthetically designed housing with powder coated corrosion resistant housing 33 working temperature 20 degree to 50 degree 34 working humidity 10% to 90% rh 35 housing the fixture should comprise of a top canopy made of di cast high pressure aluminum alloy of adequate thickness and a lower part comprises of uv resistant acrylic bowl top frosted for visual comfort 36 construction leds are mounted on a circular / array mcpcb which is thermally glued to an aluminum sheet provided with aluminum fins firmly connected to the housing for excellent heat dissipation. ( q3 ) total quantity : 5...

Due Date : April 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
19
Urban Development And Housing Department - Gujarat

42995550 bids are invited for 0 luminaries wattage 200w 1 light source high power led 2 make of led lamps any manufactures registered with r &b state under cat iii 3 lighting distribution type cut off / semi cut off type as per iesna type ii / iii lighting distribution. 4 luminary efficacy >100 lm / w + / 5 % 5 operating voltage range 140 280v 6 operating voltage 230v + / 10% 8 operating frequency 50 hz + / 3% hz 9 total harmonic distortion current < 15%; voltage < 5% 10 power factor >= 0.95 11 operating current <700 ma 12 usage hours dusk to dawn ( 12 hours ) 13 audible noise shall have class a sound rating with audible noise in power supply 14 beam angle 120 degrees ( minimum ) 15 life span 50000 burning hours with 80% lumen maintenance 16 color temperature 5500 6000k ( suitable for “cool white” light ) for access road street lighting and 3500 4000k for the utility plant street lighting. 17 color rendering index ( cri ) min. 70 18 uniformity ratio ( emin / eavg ) 60% 19 transverse uniformity ratio ( emin / emax ) 40% 20 ingress protection ip 66 for street lighting driver: 21 driver efficiency >90% 22 optical efficiency > 95% 23 p / n junction temperature <100 degrees c at junction point and <60 at heat sink. 24 surge immunity level 4.5 kv 25 earthing driver unit shall have provision for proper grounding 26 short circuit protection recovers automatically after fault condition is removed. 27 over voltage protection should be able to withstand 320v for minimum 24 hours 28 high – low voltage cutoff in side luminary or a device to be installed on the pole in an ip protected box sustaining 270v for higher side cutoff & 140 v on lower side cutoffbeyond& below it shut down & restore normal working condition when voltage 29 housing with supplier word mark / name engraved / embossing on the die cast housing / body part 30 connecting wires & cables used frls three core copper wire of 2.5 mtr outside luminaire 31 impact resistance of complete luminaire ik 05 or above 32 finish aesthetically designed housing with powder coated corrosion resistant housing 33 working temperature 20 degree to 50 degree 34 working humidity 10% to 90% rh 35 housing the fixture should comprise of a top canopy made of di cast high pressure aluminum alloy of adequate thickness and a lower part comprises of uv resistant acrylic bowl top frosted for visual comfort 36 construction leds are mounted on a circular / array mcpcb which is thermally glued to an aluminum sheet provided with aluminum fins firmly connected to the housing for excellent heat dissipation. ( q3 ) total quantity : 14...

Due Date : April 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
21
Department Of Defence - Gujarat

42918207 bids are invited for custom bid for services e068 hydraulic oil leakage observed from steering system hydraulic cylinder suspect steering cylinder oil seal worn out defect to be rectified by replacing 02 in nos oil seal and proved for satisfactory operation inway j.. , custom bid for services l168 ecdis cpu make transas model navi sailor 4000 not booting up suspect hard disk corrupted hard disk to be reprogrammed renewed charts along with license to be installed defect to be rectified and system to be proved .. , custom bid for services l169 engine room camera not available in conning display found camera daynight and cable defective camera to be upgraded with ip version and cable from cockpit to engine bay approx 15 mtrs to be renewed system to be integ.. , custom bid for services 08 nos elsa cylinders are due for hydraulic pressure testing inway jobs includes servicing and renewal of defective parts ie valve face mask hoses clips cylinder recharge servicing and hydraulic pressure testing by dg shippi.. , custom bid for services h058 movement of crafts gangway observed during embarkationdisembarkation of crewpassenger wheel stoppers to be provided for restriction of movement of the gangway qty 20 nos 04 nos per gangway total no of gangway 05 mat s.. , custom bid for services l188 apu alternator 12v 60 amp not developing rated output voltage alternator to be overhauled and proved for satisfactory operation , custom bid for services e084 bme exhaust manifold and turbochargers lagging perished and deteriorated due to red hot of exhaust manifold and turbochargers turbine housing during exploiting lagging to be renewed and secured with heat resistance stai.. , custom bid for services h072 a following observed on steering oil tank cover i aluminum sheet cover deteriorated thinned down iisecuring mechanism of nut bolt holes enlarged iii crack approx 8 cm observed on cover ivabnormal vibration and frequent.. , custom bid for services h073 erb cradle nylon pin along with locking arrangement deteriorated and thinned down nylon pin along with securing clamp arrangement to be renewed as per sample pin mat nylon size of pin length 20 cm dia 20 cm qty 04 n.. , custom bid for services h074 02 no side body aluminum strut attached with deck near stbd aft fuel tank deterioratedcracked and material thinned down strut to be renewed as per sample size length3 mtr dia 02 material aluminum material yard supp.. , custom bid for services h075 one in no foldable seat base channel secured with detention cell paneling in crew mess area deformed chair base channel to be repairedrenewed and secured with detention cell panel mat ss , custom bid for services h076 apu radiator grp cover along with deck securing hole observed to be enlarged and unable to hold rivets view material thin down defect to be rectified by applying grp coating on securing cover edge areasize 500x500mm ma.. total quantity :...

Due Date : March 16, 2024

Tender Value : ₹ Ref. Documents

View Tender
23
Gujarat State Electricity Corporation Limited - Gujarat

42883764 tender for removal, application of mineral wool thermal insulation & supply, application of aluminum sheets with required materials for various pipes, valves, bends, vessels etc. of turbine & its auxiliaries and spray insulation on turbines of tdbfps of 500 mw unit no.6 of utps on “as and when required” basis. (tmd 6)...

Due Date : March 22, 2024

Tender Value : ₹ 9.79 Lakhs

View Tender
24
Mahatma Gandhi National Rural Employment Guarantee Scheme - Gujarat

42807560 supply of mgnrega material supply, 2024 25; 1 bilimoria brick no 1000 2 binding wire of 18 gauge thick annealed iron kg 1 3 binding wires kg 1 4 blasting powder kg 1 5 tiles 600 x 600 x 16 mm piece 1 6 boundry stone each 1 7 tiles 600 x 600 x 20 mm piece 1 8 tiles 600 x 600 x 15 mm piece 1 9 tiles 600 x 600 x 0.5 mm gi metal piece 1 10 hysd bar quintal 1 11 brick bats chhara cu.m. 1 12 brick aggregate 40mm size cu.m. 1 13 cement mt 1 14 cement bags ( empty ) each 1 15 ceramic tiles sq.m. 1 16 coarse sand cu.m. 1 17 cold twisted bars quintal 1 18 common burnt clay bricks conventional size nos 1000 19 common burnt clay bricks modular size 20x10x10 cm nos 1000 20 corrugated a.c. sheet 6 mm thick sq.m. 1 21 corrugated a.c. sheet 7 mm thick sq.m. 1 22 crushed stone aggregate for hard quality 10 to 20mm size cu.m. 1 23 crushed stone aggregate for hard quality 10mm size cu.m. 1 24 crushed stone aggregate for hard quality 20mm size cu.m. 1 25 crushed stone aggregate for hard quality 40mm size cu.m. 1 26 crushed stone aggregate for hard quality 40mm to 63mm size cu.m. 1 27 crushed stone aggregate for hard quality 6 to 10mm size cu.m. 1 28 crushed stone aggregate for hard quality 6mm size cu.m. 1 29 diesel litre 1 30 distemper primer litre 1 31 enamel paint litre 1 32 enamel primer litre 1 33 fine sand cu.m. 1 34 fly ash brick nos 1000 35 g.i sheet 0.8 mm thick corrugated class 3 quintal 1 36 g.i sheet 0.8 mm thick plain class 3 quintal 1 37 g.i sheet 0.8 mm thick semi circular class 3 quintal 1 38 g.i. pipe 30 cm long 50 mm dia each 1 39 hard marrum cu.m. 1 40 manglore tiles nos 1000 41 marble number plate each char. 1 42 marble chips upto 4 mm size. quintal 1 43 marble powder cu.m. 1 44 marble slab 18 to 20 mm sq.m. 1 45 mild steel bars quintal 1 46 p.v.c. nahni trap each 1 47 p.v.c. pipes 10 kgf / sq.cm. 110 mm dia. rmt 1 48 p.v.c. pipes 10 kgf / sq.cm. 50mm dia. rmt 1 49 p.v.c. pipes 10 kgf / sq.cm. 75mm dia. rmt 1 50 p.v.c. pipes 10 kgf / sq.cm. 20mm dia. rmt 1 51 p.v.c. pipes 10 kgf / sq.cm. 25mm dia. rmt 1 52 p.v.c. pipes 10 kgf / sq.cm. 32mm dia. rmt 1 53 p.v.c. pipes 10 kgf / sq.cm. 40mm dia. rmt 1 54 p.v.c. pipes 6 kgf / sq.cm. 110 mm dia. rmt 1 55 p.v.c. pipes 6 kgf / sq.cm. 50mm dia. rmt 1 56 p.v.c. pipes 6 kgf / sq.cm. 75mm dia. rmt 1 57 p.v.c. pipes 6 kgf / sq.cm. 20mm dia. rmt 1 58 p.v.c. pipes 6 kgf / sq.cm. 25mm dia. rmt 1 59 p.v.c. pipes 6 kgf / sq.cm. 32mm dia. rmt 1 60 p.v.c. pipes 6 kgf / sq.cm. 40mm dia. rmt 1 61 petrol litre 1 62 plain a.c. sheet 6 mm thick sq.m. 1 63 plain asbestos sheet 5mm thick sq.m. 1 64 plain asbestos sheet 6mm thick sq.m. 1 65 plain asbestos sheet 7mm thick sq.m. 1 66 plain g.i. sheet 1 mm thick quintal 1 67 pre cast cement concrete tiles sq.m. 1 68 rajula stone each 1 69 rubble cu.m. 1 70 rubble ( heavy ) at not less than 40 kg. cu.m. 1 71 stone dust cu.m. 1 72 stone slab 100mm thickness sq.m. 1 73 structual steel m.s. channel joints tee gusset plate etc. quintal 1 74 t.m.t. bars fe 415 quintal 1 75 terrazo tiles chequered dark shade 22mm thick sq.m. 1 76 terrazo tiles chequered light shade 22mm thick sq.m. 1 77 terrazo tiles chequered dark shade 28 mm thick sq.m. 1 78 terrazo tiles chequered light shade 28 mm thick sq.m. 1 79 terrazo tiles dark shade 20 mm thick sq.m. 1 80 terrazo tiles light shade 20 mm thick sq.m. 1 81 turpentine litre 1 82 unscreened gravel cu.m. 1 83 varnish litre 1 84 vitryfied granite tiles 8 mm to 10 m thick 24 x 24 size dark shade sq.m. 1 85 vitryfied granite tiles 8 mm to 10 m thick 36 x 36 size sq.m. 1 86 water proofing cement paint kg 1 87 water proofing material heasion base self finish tar felt roll sq.m. 1 88 water proofing materials kg 1 89 water proofing materials of polyarethine on aromatic base kg 1 90 white cement mt 1 91 white lime ( white washing ) quintal 1 92 white paint litre 1 93 white glazed tiles 15cm x 15cm x 6cm. nos 10 94 alluminium sheet 2mm thick kgs. 1 95 precast concrete blocks ( 1:3:6 ) ( 39 x 20 x 19 cms ) nos 100 96 c.i. pipe 100mm dia rmt 1 97 g.i. pipe 100mm dia rmt 1 98 g.i. pipe 50mm dia a class rmt 1 99 g.i. pipe 40mm dia a class rmt 1 100 g.i. coupling 50mm dia a class rmt 1 101 g.i. coupling 40mm dia a class rmt 1 102 hollow concrete blocks ( size 39 x 9 x 19 cms ) each 1 103 hollow concrete blocks ( size 39 x 14 x 9 cms ) each 1 104 hollow concrete blocks ( size 39 x 14 x 19 cms ) each 1 105 water tanker 6 kl capacity hour 1 106 12mm thick m.s. plate quintal 1 107 gusset plate quintal 1 108 tmt bar fe 500 d quintal 1 109 vitrified granite tiles 8 mm to 10 m thick 24 x 24 size antiskid sqm 1 110 vitrified granite tiles 8 mm to 10 m thick 24 x 24 size light shade sqm 1 111 r.c.c heavy duty non pressure pipe i.s.class np=4 300mm dia. meter 1 112 r.c.c heavy duty non pressure pipe i.s.class np=4 450mm dia. meter 1 113 r.c.c heavy duty non pressure pipe i.s.class np=4 600mm dia meter 1 114 glass 12 mm thick sqmtr 1 115 glass 10 mm thick sqmtr 1 116 glass 8 mm thick sqmtr 1 117 precast concrete block of c.c.1:3:6 100 nos. 1 118 tiles size 15 cm x 15 cm ( glazed ) nos 10 119 pvc swr pipes is 13592 for drain 75 mmdia rmt 1 120 pvc swr pipes is 13592 for drain 90 mmdia rmt 1 121 pvc swr pipes is 13592 for drain 110 mmdia rmt 1 122 pvc swr pipes is 13592 for drain 160 mmdia rmt 1 123 pvc swr nani trap is 14735 for drain 75 mm dia with jali no 1 124 pvc swr nani trap is 14735 for drain 100 mm dia with jali no 1 125 r.c.c heavy duty non pressure pipe i.s.class np=2 750mm dia. rmt 1 126 r.c.c heavy duty non pressure pipe i.s.class np=3 900mm dia. rmt 1 127 labour charges bhisti each 1 128 labour charges blacksmith 1st class each 1 129 labour charges blacksmith 2nd class each 1 130 labour charges breaker each 1 131 labour charges carpentar 1st class each 1 132 labour charges carpentar 2nd class each 1 133 labour charges chowkidar each 1 134 labour charges excavator each 1 135 labour charges fitter each 1 136 labour charges mason 1st class each 1 137 labour charges mason 2nd class each 1 138 labour charges mate each 1 139 labour charges mazdoor ( female ) each 1 140 labour charges mazdoor ( male ) each 1 141 labour charges mistry each 1 142 labour charges painter each 1 143 labour charges plumber ( fitter ) each 1 144 labour charges plumber ( fitter ) assist each 1 145 semi skill helper days 1 146 unskilled labour days 1 147 labour charges mazdoor with hand cart each 1 148 helper days 1 149 labour charges beldar each 1 150 labour charges chiseller ( semi skilled ) each 1 151 hire charges for mech. mixer ( extra cost ) l.s 1 152 hire charges for road roller per day 1 153 hire charges for vibrator l.s 1 154 hire charges for vibratory road roller hour 1 155 tractor with rotovator hrs 1 156 citizen infrometrick board ( painting ) no 1 157 citizen information board 2x3 feet ( with painting ) 1:2:4 no 1 158 citizen information board 3x4 feet ( with painting ) 1:2:4 no 1 159 g.i.plate no 1...

Due Date : March 20, 2024

Tender Value : ₹ Ref. Documents

View Tender
25
Gujarat State Electricity Corporation Limited - Gujarat

42656118 removal, application of mineral wool thermal insulation & supply, application of aluminum sheets with required materials for various pipes, valves, bends, vessels etc. of turbine & its auxiliaries and spray insulation on turbines of tdbfps of 500 mw unit no.6 of utps on “as and when required” basis. (tmd 6 wt 4638)...

Due Date : March 12, 2024

Tender Value : ₹ 9.79 Lakhs

View Tender
26
Gujarat State Electricity Corporation Limited - Gujarat

42411896 tender for removal, application of mineral wool thermal insulation & supply, application of aluminum sheets with required materials for various pipes, valves, bends, vessels etc. of turbine & its auxiliaries and spray insulation on turbines of tdbfps of 500 mw unit no.6 of utps on “as and when required” basis. (tmd 6)...

Due Date : March 12, 2024

Tender Value : ₹ 9.79 Lakhs

View Tender
27
Department Of Defence - Gujarat

42381045 bids are invited for custom bid for services e068 hydraulic oil leakage observed from steering system hydraulic cylinder suspect steering cylinder oil seal worn out defect to be rectified by replacing 02 in nos oil seal and proved for satisfactory operation inway j.. , custom bid for services l168 ecdis cpu make transas model navi sailor 4000 not booting up suspect hard disk corrupted hard disk to be reprogrammed renewed charts along with license to be installed defect to be rectified and system to be proved .. , custom bid for services l169 engine room camera not available in conning display found camera daynight and cable defective camera to be upgraded with ip version and cable from cockpit to engine bay approx 15 mtrs to be renewed system to be integ.. , custom bid for services 08 nos elsa cylinders are due for hydraulic pressure testing inway jobs includes servicing and renewal of defective parts ie valve face mask hoses clips cylinder recharge servicing and hydraulic pressure testing by dg shippi.. , custom bid for services h058 movement of crafts gangway observed during embarkationdisembarkation of crewpassenger wheel stoppers to be provided for restriction of movement of the gangway qty 20 nos 04 nos per gangway total no of gangway 05 mat s.. , custom bid for services l188 apu alternator 12v 60 amp not developing rated output voltage alternator to be overhauled and proved for satisfactory operation , custom bid for services e084 bme exhaust manifold and turbochargers lagging perished and deteriorated due to red hot of exhaust manifold and turbochargers turbine housing during exploiting lagging to be renewed and secured with heat resistance stai.. , custom bid for services h072 a following observed on steering oil tank cover i aluminum sheet cover deteriorated thinned down iisecuring mechanism of nut bolt holes enlarged iii crack approx 8 cm observed on cover ivabnormal vibration and frequent.. , custom bid for services h073 erb cradle nylon pin along with locking arrangement deteriorated and thinned down nylon pin along with securing clamp arrangement to be renewed as per sample pin mat nylon size of pin length 20 cm dia 20 cm qty 04 n.. , custom bid for services h074 02 no side body aluminum strut attached with deck near stbd aft fuel tank deterioratedcracked and material thinned down strut to be renewed as per sample size length3 mtr dia 02 material aluminum material yard supp.. , custom bid for services h075 one in no foldable seat base channel secured with detention cell paneling in crew mess area deformed chair base channel to be repairedrenewed and secured with detention cell panel mat ss , custom bid for services h076 apu radiator grp cover along with deck securing hole observed to be enlarged and unable to hold rivets view material thin down defect to be rectified by applying grp coating on securing cover edge areasize 500x500mm ma.. total quantity :...

Due Date : March 02, 2024

Tender Value : ₹ 6.15 Lakhs

View Tender
30
Department Of Labor And Employment - Gujarat

42076196 bids are invited for raw material bid 3 2024 rust remover spray , stainless steel , alluminium sheet , m s filler wire spool , s s filler wire , alluminium filler wire , borex powder , hard facing electrode , m s pipe , dark glass , clear glass total quantity : 84...

Due Date : February 17, 2024

Tender Value : ₹ Ref. Documents

View Tender
31
Gujarat State Electricity Corporation Limited - Gujarat

41903628 removal, application of mineral wool thermal insulation & supply, application of aluminum sheets with required materials for various pipes, valves, bends, vessels etc. of turbine & its auxiliaries and spray insulation on turbines of tdbfps of 500 mw unit no.6 of utps on “as and when required” basis. (tmd 6 wt 4638)...

Due Date : April 23, 2024

Tender Value : ₹ 9.79 Lakhs

View Tender
32
Western Railway - Gujarat

41580871 supply of retro reflectiveretro reflective,retro reflective type warning board for neutral section 500 m of size 450x750x2 mm (pasted with non reflective sheet in blue colour and letters/symbols of retro reflective type iv high intensity prismatic sheeting in white colour) conforming to rdso specification. no. eti/ohe/33a (12/97) rev 8 or latest and similar to rdso drg. no.re/33/347 mod b or latest. [ warranty period: 30 months after the date of delivery ] , retro reflective type warning board for neutral section 250 m of size 450x750x2 mm (pasted with non reflective sheet in blue colour and letters/symbols of retro reflective type iv high intensity prismatic sheeting in white colour) conforming to rdso specification. no. eti/ohe/33a (12/97) rev 8 or latest and similar to rdso drg. no.re/33/355 mod b or latest. [ warranty period: 30 months after the date of delivery ] , retro reflective type caution board 25 kv (ohe nearby) size:400mmx270mm as per rdso spec. no. eti/ohe/33a (12/97) rev 8 (latest) & rdso drg. no.re/33/436. [ warranty period: 30 months after the date of delivery ] , retro reflective type memu dj close board as follows, switch on power plate with word ? memu? made up of 2mm aluminium sheet of size 800 x 400 mm. pasted with reflective sheet in blue colour and letters/symbols of retro reflective type iv high intensity prismatic sheeting in white colour as per rdso spec no. eti/ohe/33a 12/97 rev. 8 or latest and similar to rdso drg.no re/33/349 mod b or latest. [ warranty period: 30 months after the date of delivery ] , retro reflective type power block working limit board size:450x450x2 mm as per rdso spec. no. eti/ohe/33a (12/97) rev 8 or latest. & similar to rdso drg no. eti/ohe/p/7574. [ warranty period: 30 months after the date of delivery ] page 1 of 4 run date/time: 11/01/2024 18:04:15adi div/western rly tender document , retro reflective type public caution board (3 language hindi, english, gujarati) size: 700mmx400x2mm as per rdso spec. no. eti/...

Due Date : February 02, 2024

Tender Value : ₹ Ref. Documents

View Tender
33
Mahatma Gandhi National Rural Employment Guarantee Scheme - Gujarat

41365251 material supply work, 2023 24.; 1. 1 aluminum powder 1 kg 2. 2 aluminum sheet 22 guage thick 1 sqmt 3. angle size 15 x 15 cm. ( glazed ) 1 kg 4. asbestos rope 1 mt 5. barbed wire for fencing of galvanized steel wire 1 quintal 6. bat clamps 100 mm dia 1 nos 7. bat clamps 80 mm dia 1 nos 8. binding wire of 18 gauge thick annealed iron 1 kg 9. binding wires 1 kg 10. black stone for cooking platfrom ( 1.50 sq.mt. ) 1 sqmt 11. blasting 1 hole 12. bolt l 3 to 4 size iron ( 7.5cms to 10 cms ) 1 doz. 13. bolts 12 mm dia. 10 cm. long 1 kg 14. bolts 12 mm dia. 10 cm. long 1 kg 15. boundry stone 1 nos 16. brick aggregate 40mm size 1 cu.m. 17. c.i. nahni trap 1 nos 18. c.r.c sheet 1 quintal 19. cement 1 bag 20. cement bags ( empty ) 1 nos 21. ceramic tiles 1 sqmt 22. chicken wire mesh 16 x24 1 sqmt 23. coal tar 1 litre 24. coarse sand 1 cu.m. 25. cold twisted bars 1 quintal 26. commercial plywood sheet 12 mm 1 sqmt 27. commercial plywood sheet 19 mm 1 sqmt 28. commercial plywood sheet 25 mm 1 sqmt 29. commercial plywood sheet 6 mm 1 sqmt 30. common burnt clay bricks conventional size 1000 nos 31. corrugated a.c. sheet 6 mm thick 1 sqmt 32. corrugated a.c. sheet 7 mm thick 1 sqmt 33. crimp jali 12 gauge 1 sqmt 34. crushed stone aggregate for hard quality 10 to 20mm size 1 cumt 35. crushed stone aggregate for hard quality 10mm size 1 cumt 36. crushed stone aggregate for hard quality 20mm size 1 cumt 37. crushed stone aggregate for hard quality 40mm size 1 cumt 38. crushed stone aggregate for hard quality 40mm to 63mm size 1 cumt 39. crushed stone aggregate for hard quality 6 to 10mm size 1 cumt 40. crushed stone aggregate for hard quality 6mm size 1 cumt 41. dark shade pigment 1 kg 42. diesel 1 litre 43. distemper primer 1 litre 44. dry distemper 1 kg 45. enamel paint 1 litre 46. enamel primer 1 litre 47. expanded metal jali 12 x 12 gauge 1 sqmt 48. fevicol s.r. 998 1 kg; 49. fine sand 1 cumt 50. flat back wash basin colour glazed 450 x 300 size 1 nos 51. flat back wash basin colour glazed 550 x 400 size 1 nos 52. flat back wash basin colour glazed 630 x 510 size 1 nos 53. flat back wash basin white vitrious china 630 x 510 1 nos 54. fly ash brick 1000 nos 55. fuse 1 nos 56. g.i. barbed wire 1 quintal 57. g.i. pipe 30 cm long 50 mm dia 1 nos 58. g.i. j or l hooks 10 nos 59. g.i. plain washer 100 nos 60. g.i.seam bolts and nuts 25 mm x 6 mm 10 nos 61. gauge plate 1 quintal 62. geru in crystal ( sona ) 1 kg 63. glass 2 mm to 3 mm thick 1 sqmt 64. guard stone 1 nos 65. gum 1 kg 66. hacksaw blade double thread 1 doz. 67. hammer iron 1 lbs 1 nos 68. hammer iron 2 lbs 1 nos 69. hand broken stone aggregate 25mm size to 90mm size 1 cumt 70. hand broken stone aggregate 40mm size to 63mm size. 1 cumt 71. hard marrum 1 cumt 72. iron bib tap 15mm. dia 1 nos 73. iron bib tap 20mm. dia 1 nos 74. linseed oil 1 litre 75. m.s. road sign board / village name board non reflective type 1 nos 76. manglore tiles 1000 nos 77. marble number plate 1 nos 78. marble slab stone 25mm thick double polished 1 sqmt 4 79. marble slab machine cut marble tiles 6mm thick 30cms x 15cms 1 sqmt 80. marble slab polished granite stone 20 to 25mm thick black 1 sqmt 81. marble slab polished granite stone 20 to 25mm 1 sqmt 82. marbo granite flooring tiles 8mm th. 1 sqmt 83. medium shade pigment 1 kg 84. mild steel bars 1 quintal 85. munj for white washing 1 kg 86. murrum / binding material 1 cumt 87. p.v.c bib tap 15mm. dia 1 nos 88. p.v.c bib tap 20mm. dia 1 nos 89. p.v.c. nahni trap 1 nos 90. p.v.c. pipes 10 kgf / sq.cm. 110 mm dia. 1 rmt 91. p.v.c. pipes 10 kgf / sq.cm. 50mm dia. 1 rmt 92. p.v.c. pipes 10 kgf / sq.cm. 75mm dia. 1 rmt 93. p.v.c. pipes 10 kgf / sq.cm. 20mm dia. 1 rmt 94. p.v.c. pipes 10 kgf / sq.cm. 25mm dia. 1 rmt 95. p.v.c. pipes 10 kgf / sq.cm. 32mm dia. 1 rmt 96. p.v.c. pipes 10 kgf / sq.cm. 40mm dia. 1 rmt 97. p.v.c. pipes 6 kgf / sq.cm. 110 mm dia. 1 rmt 98. p.v.c. pipes 6 kgf / sq.cm. 50mm dia. 1 rmt 99. p.v.c. pipes 6 kgf / sq.cm. 75mm dia. 1 rmt 100. p.v.c. pipes 6 kgf / sq.cm. 20mm dia. 1 rmt 101. p.v.c. pipes 6 kgf / sq.cm. 25mm dia. 1 rmt 102. p.v.c. pipes 6 kgf / sq.cm. 32mm dia. 1 rmt 103. p.v.c. pipes 6 kgf / sq.cm. 40mm dia. 1 rmt 104. petrol 1 litre 105. pillar tap 15mm dia 1 nos 106. pillar tap 20mm dia 1 nos 107. dewatering 1 cumt 108. centering & suttering 1 sqmt 109. ms nail ( khilli ) 1 kg 110. water pump ( 3” ) 1 day 5 111. lift machine ( for well charkhi ) 1 day 112. concrete lift machine 1 day 113. mixture machine 1 day 114. pre cast door & window frame 1 sqmt 115. unscreen graval 1 cumt 116. plain a.c. sheet 6 mm thick 1 sqmt 117. plain asbestos sheet 5mm thick 1 sqmt 118. plain asbestos sheet 6mm thick 1 sqmt 119. plain asbestos sheet 7mm thick 1 sqmt 120. plain g.i. sheet 1 mm thick 1 quintal 121. polished kota stone slab green. 25 mm thick 1 sqmt 122. polished kota stone slab green. 30 mm thick 1 sqmt 123. polished kota stone slab green. 40 mm thick 1 sqmt 124. precast cement concrete tiles 1 sqmt 125. precast rcc jali 100 mm thick 1 sqmt 126. precast rcc jali 25 mm thick 1 sqmt 127. precast rcc jali 40 mm thick 1 sqmt 128. precast rcc jali 50 mm thick 1 sqmt 129. precast rcc jali 75 mm thick 1 sqmt 130. rajula stone 1 nos 131. rough kota stone slab. 25 mm thick 1 sqmt 132. rough kota stone slab. 40 mm thick 1 sqmt 133. rubble 1 cumt 134. rubble ( heavy ) at not less than 40 kg. 1 cumt 135. screened gravel 10mm size 1 cumt 136. screened gravel 12mm size 1 cumt 137. soft brush. 1 nos 138. stone dust 1 cumt 139. stone slab 100mm thickness 1 sqmt 140. structual steel m.s. channel joints tee gusset plate etc. 1 quintal 6 141. t.m.t. bars fe 415 1 kg 142. thick wire brushes 1 nos 143. through & bond stone 1 nos 144. turpentine 1 litre 145. varnish 1 litre 146. vitryfied granite tiles 8 mm to 10 mm thick 24 x 24 1 sqmt 147. vitryfied granite tiles 8 mm to 10 mm thick 36 x 36 size 1 sqmt 148. waste pipe for wash basin c.p. 32 mm dia 1 nos 149. waste pipe for wash basin c.p. 40 mm dia 1 nos 150. water proofing materials omaiseal of bitumen base in semin liquid form ( cold applied ) 1 litre 151. water proofing cement paint 1 kg 152. water proofing materials 1 kg 153. white cement 1 kg 154. white lime ( white washing ) 1 kg 155. white paint 1 litre 156. wire gauge jali of 0.56 mm 1 sqmt 157. wire gauge jali of 0.71 mm 1 sqmt 158. wooden peg 1 nos 159. iron angle 75 x 75 x 6mm 1 kg 160. iron angle for stand & frame 1 kg 161. alluminium sheet 2mm thick 1 kg 162. precast concrete blocks ( 1:3:6 ) ( 39 x 20 x 19 cms ) 100 nos 163. steel plate & angle 1 mt 164. granular sub base material ( gsb ) 1 cumt 165. c.i. pipe 100mm dia 1 rmt 166. g.i. pipe 100mm dia 1 rmt 167. g.i. pipe 50mm dia a class 1 rmt 168. g.i. pipe 40mm dia a class 1 rmt 169. g.i. coupling 50mm dia a class 1 rmt 170. g.i. coupling 40mm dia a class 1 rmt 171. hollow concrete blocks ( size 39 x 9 x 19 cms ) 1 nos 172. hollow concrete blocks ( size 39 x 14 x 9 cms ) 1 nos 173. hollow concrete blocks ( size 39 x 14 x 19 cms ) 1 nos 174. water tanker 6 kl capacity 1 hour 175. 12mm thick m.s. plate 1 quintal 176. gusset plate 1 quintal 177. m.s. channel 1 quintal 178. m.s tee 1 quintal 179. m.s. angel 1 kg 180. alluminium section any size, powder coated 1 kg 181. alluminium section any size, anodized 1 kg 7 182. tmt bar fe 500 d 1 quintal 183. vitrified granite tiles 8 mm to 10 m thick 24 x 24 size antiskid 1 sqmt 184. vitrified granite tiles 8 mm to 10 m thick 24 x 24 size light shade 1 sqmt 185. r.c.c heavy duty non pressure pipe i.s.class np=4 300mm dia. 1 meter 186. r.c.c heavy duty non pressure pipe i.s.class np=4 450mm dia. 1 meter 187. r.c.c heavy duty non pressure pipe i.s.class np=4 600mm dia 1 meter 188. r.c.c heavy duty non pressure pipe i.s.class np=4 900mm dia 1 meter 189. r.c.c heavy duty non pressure pipe i.s.class np=4 1000mm dia 1 meter 190. r.c.c heavy duty non pressure pipe i.s.class np=4 1200mm dia 1 meter 191. hard galvanized steel wire 1 sqmt 192. concealed cock 15 mm heavy duty with cap 1 no. 193. precast concrete block of c.c.1:3:6 60 mm 100 nos. 194. tiles size 15 cm x 15 cm ( glazed ) 10 nos. 195. c.i.75 mm diameter rain water pipe 1 rmt. 196. plywood all proof ( is 710 ) 6 mm 1 sqmt 197. plywood all proof ( is 710 ) 8 / 9 mm 1 sqmt 198. plywood all proof ( is 710 ) 12 mm 1 sqmt 199. plywood all proof ( is 710 ) 16 mm 1 sqmt 200. plywood all proof ( is 710 ) 18 / 19 mm 1 sqmt 201. cpvc pipe sdr 13.5 15 mm daimeter ( 1 / 2 ) 1 rmt 202. cpvc pipe sdr 13.5 20 mm daimeter ( 3 / 4 ) 1 rmt 203. cpvc pipe sdr 13.5 25 mm daimeter ( 1 ) 1 rmt 204. cpvc pipe sdr 13.5 32 mm daimeter ( 1 1 / 4 ) 1 rmt 205. cpvc pipe sdr 13.5 40 mm daimeter ( 1 1 / 2 ) 1 rmt 206. cpvc pipe sdr 13.5 50 mm daimeter 1 rmt 207. cpvc pipe jointing solution 50 ml 1 nos 208. u pvc sch40 for cold water 15 mm dia ( 1 / 2 ) 1 rmt 209. u pvc sch40 for cold water 20 mm dia ( 3 / 4 ) 1 rmt 210. u pvc sch40 for cold water 25 mm dia ( 1 ) 1 rmt 211. u pvc sch40 for cold water 32 mm dia ( 1 1 / 4 ) 1 rmt 212. u pvc sch40 for cold water 40 mm dia ( 1 1 / 2 ) 1 rmt 213. u pvc sch40 for cold water 50 mm dia ( 2 ) 1 rmt 214. upvc pipe jointing solution 50 ml 1 nos 215. pvc swr pipes is 13592 for drain 75 mmdia 1 rmt 216. pvc swr pipes is 13592 for drain 90 mmdia 1 rmt 217. pvc swr pipes is 13592 for drain 110 mmdia 1 rmt 218. pvc swr pipes is 13592 for drain 160 mmdia 1 rmt 8 219. pvc swr nani trap is 14735 for drain 75 mm dia with jali 1 nos 220. pvc swr nani trap is 14735 for drain 100 mm dia with jali 1 nos 221. pvc swr p trap is 14735 for drain 110x110 1 nos 222. pvc swr p trap is 14735 for drain 125x110 1 nos 223. pvc swr s trap is 14735 for drain 110x110 1 nos 224. pvc swr s trap is 14735 for drain 125x110 1 nos 225. pvc swr single y 110 mm dia 1 nos 226. pvc swr single t 110 mm dia 1 nos 227. pvc swr reducer 110 x 75 1 nos 228. pvc swr piipe clamp 75 mm 1 nos 229. pvc swr piipe clamp 110 mm 1 nos 230. pvc swr piipe bend 87.5 degree with door for 75 mm diameter 1 nos 231. pvc swr piipe bend 87.5 degree with door for 90 mm diameter 1 nos 232. pvc swr piipe bend 87.5 degree with door for 110 mm diameter 1 nos 233. pvc swr wc connector 110 mm 1 nos 234. pvc swr coupler 75 mm dia 1 nos 235. pvc swr coupler 110 mm dia 1 nos 236. pvc swr piipe bend 45 degree 75 mm dia 1 nos 237. pvc swr piipe bend 45 degree 110 mm dia 1 nos 238. r.c.c heavy duty non pressure pipe i.s. class np=3 casted by vertically vibrated technology 300mm dia. 1 rmt 239. r.c.c heavy duty non pressure pipe i.s. class np=3 casted by vertically vibrated technology 450mm dia. 1 rmt 240. r.c.c heavy duty non pressure pipe i.s. class np=3 casted by vertically vibrated technology 500mm dia. 1 rmt 241. r.c.c heavy duty non pressure pipe i.s. class np=3 casted by vertically vibrated technology 600mm dia. 1 rmt 242. r.c.c heavy duty non pressure pipe i.s. class np=3 casted by vertically vibrated technology 900mm dia. 1 rmt 243. r.c.c heavy duty non pressure pipe i.s. class np=3 casted by vertically vibrated technology 1000mm dia. 1 rmt 244. r.c.c heavy duty non pressure pipe i.s. class np=4 casted by vertically vibrated technology 300mm dia. 1 rmt 245. r.c.c heavy duty non pressure pipe i.s. class np=4 casted by vertically vibrated technology 450mm dia. 1 rmt 246. r.c.c heavy duty non pressure pipe i.s. class np=4 casted by vertically vibrated technology 500mm dia. 1 rmt 9 247. r.c.c heavy duty non pressure pipe i.s. class np=4 casted by vertically vibrated technology 600mm dia. 1 rmt 248. r.c.c heavy duty non pressure pipe i.s. class np=4 casted by vertically vibrated technology 900mm dia. 1 rmt 249. r.c.c heavy duty non pressure pipe i.s. class np=4 casted by vertically vibrated technology 1000mm dia. 1 rmt 250. vitryfied tiles 8 mm to 10 m thick 600 x600 mm size light shed 1 sqmt 251. r.c.c heavy duty non pressure pipe i.s.class np=2 750mm dia. 1 rmt 252. r.c.c heavy duty non pressure pipe i.s.class np=3 900mm dia. 1 rmt 253. brick bats 20mm 1 cumt 254. pre cast kerb block m250 grade 1 rmt 255. paver block m200 grade 60mm thick 1 sqmt 256. paver block m250 grade 60mm thick 1 sqmt 257. glzed tiles piece wastege. 1 sqmt 258. pvc water tank 1 litre 259. plasticizer 300 ml of 50 kg cement 1 liter 260. clamps including nails 1 nos 261. solution 50 ml adhesive solvent 1 nos 262. 3. clamps 1 nos 263. 4. solution 1 nos 264. nut bolts 1 nos 265. epoxy chemical ( incl gst 18 % ) 1 nos 266. tiles 600 x 600 x 16 mm 1 piece 267. tiles 600 x 600 x 20 mm 1 piece 268. tiles 600 x 600 x 15 mm 1 piece 269. tiles 600 x 600 x 0.5 mm gi metal 1 piece 270. main runner 24 mm t 38 web height 3000 mm length 1 piece 271. hysd bar 1 quintal 272. r.c.c heavy duty non pressure pipe i.s.class np=2 750mm dia. 1 meter 273. carriage of concrete block ( 39cm x 20cm x 19cm ) ( more than 10 ton ) 100 nos 274. pre cast column ( thambli ) 6 feet 1 nos 275. pre cast column ( thambli ) 7 feet 1 nos 276. pre cast column ( thambli ) 8 feet 1 nos 277. pre cast column ( thambli ) 9 feet 1 nos 278. pre cast column ( thambli ) 10 feet 1 nos 279. pre cast column ( thambli ) 11 feet 1 nos 280. pre cast column ( thambli ) 12 feet 1 nos 10 281. hire charges of jcb ( excavator ) 1 hour 282. hire charges for tractour with trolly 1 day 283. welding machine 1 day 284. welding rod 1 nos 285. hire charges for road roller ( 8 to 10 ton ) 1 hour 286. crushed stone aggregate for hard quality 6mm to 10mm size 1 cumt 287. hire charges for compresor 1 per day 288. hire charges for crane 1 hr 289. quarry spall 1 cumt 290. hire charges for vibrator 1 l.s 291. hire charges for vibratory road roller 1 hour 292. tipper 10 tonne capacity 1 tonne 293. hire charges of drilling machine 1 days 294. tractor with rotovator 1 hrs 295. bitumen emulsion pressure distributor 1 days 296. excavator pile driving 1 day 297. core drill 1 rmt. 298. diesel generator 1 day 299. m.s. grill 1 kg 300. aluminum doors, windows, ventilators ( as per specification ) 1 mr 301. photografs 1 nos 302. xerox 1 nos 303. cib board ( brick massnary / concrite ) size 3 foot x 2foot size with pinting 1 nos 304. cib board ( brick massnary / concrite ) size 4foot x 2foot size with pinting 1 nos...

Due Date : January 06, 2024

Tender Value : ₹ Ref. Documents

View Tender
35
Health And Family Welfare Department - Gujarat

41160737 tender for laboratory equipments micro biology year, 2023 24 ( part 1 ) ; 1 acetamide ( ar ) 100gms, himedia, merck, sigma, biorad, oxoid, difco rate per gram 2 acetic acid ( ar ) aldehyde free, 500 ml, rate per ml 3 acetic acid ( lr ) glacial, 500 ml, himedia, merck, sigma, biorad, oxoid, difco rate per ml 4 acetone ( lr ) 500 ml, himedia, merck, sigma, biorad, oxoid, difco rate per ml 5 acetone ( lr ) 5000 ml, rate per ml 6 aesculin powder 5 gm himedia, merck, sigma, biorad, oxoid, difco rate per gram 7 alignment marker 20 bp, 1kb, compatible with qsep 100 fragment analyser rate per test 8 alignment marker 20 bp, 5 kb, compatible with qsep 100 fragment analyser rate per test 9 alkaline cleaning solution 2 5 %, 500 ml rate per ml 10 alluminium foil 1 pack 9 meters x 12 inch ( lx w ) rate per pack 11 alluminum rack for sv2 vial 10x5 holes rate per piece 12 alluminum rack for sv2 vial 10x3 holes rate per piece 13 alluminum rack for tissue culture tube with spring 16 x 4 holes rate per piece 14 alpha naphathol powder 100 gram, himedia / merck / difco / oxoid / biomeurex rate per gram 15 aluminium tray to carry slides 13 x 13 inch rate per piece 16 aluminum rack for 40 test tubes size of 5x3 / 4 rate per piece 17 aluminum rack for 40 wasserman tube ( 4 x ½’’ ) ( 10 x 4 ) rate per piece 18 aluminum rack for 30 wasserman tube ( 4 x ½’’ ) ( 10 x 3 ) rate per piece 19 aluminum rack small for small size test tubes 100 x 12 mm and 75 x 12 mm 12 x 4 rows with handle. ( 1 pc ) rate per piece 20 aluminum racks big for full size test tubes 100x16 mm in 10 x 3 rows with handle ( 1 pc ) r a t e per piece 21 aluminum slide drying tray with groove aluminum slide drying tray should be made up of thick aluminum sheet and should be used for drying freshly prepared slides in vertical or flat position. rate per piece 22 aluminum slide tray 10x8 for 20 ( 75x25 mm ) slides side by side, made: anodized aluminum rate per piece 23 ammonium oxalate 500 gram, himedia, merck, sigma, biorad, oxoid, difco rate per gram 24 ammonium sulphate 250 gram, himedia, merck, sigma, biorad, oxoid, difco rate per gram 25 amphotericin b solution 250 μg / ml, cell culture tested. rate per ml 26 anaerobic bag system clamp size 24 cm rate per piece 27 anaerobic bag system packs 1pack=30 bags rate per bag 28 anaerobic gas pack for 3.5 liters 1pack=5 nos rate per piece 29 anaerobic indicator tablet 1pack=5 tablets rate per tablet 30 anaerobic petri plate carrier for 10 plates , stainless steel rate per piece 31 anaerobic system rubber ring fit in 3.5 liters jar rate per piece 32 anaerobic test tube carrier stainless steel rate per piece page 1 of 2 33 antibiotic disc cefetamet 50 / 100 disc per pack, 10 micrograms, himedia, merck, b.d, biorad, oxoid rate per disc 34 antibiotic disc cefotaxime clavulanic acid 50 / 100 disc per pack, 30 / 10 micrograms, , himedia, merck, b.d, biorad, oxoid rate per disc 35 antibiotic disc ceftibuten 50 / 100 disc per pack, 30 micrograms, , himedia, merck, b.d, biorad, oxoid rate per disc 36 antibiotic disc dirithromycin 50 / 100 disc per pack, 15 micrograms, , himedia, merck, b.d, biorad, oxoid rate per disc 37 antibiotic disc doripenam 50 / 100 disc per pack, 10 micrograms, , himedia, merck, b.d, biorad, oxoid rate per disc 38 antibiotic disc fleroxacin 50 / 100 disc per pack, 5 micrograms, himedia, merck, b.d, biorad, oxoid rate per disc 39 antibiotic disc quinupristin dalfopristin 50 / 100 disc per pack, 15 micrograms, himedia, merck, b.d, biorad, oxoid rate per disc 40 antibiotic disc telavancin 50 / 100 disc per pack, 30 micrograms, himedia, merck, b.d, biorad, oxoid rate per disc 41 antibiotic disc telithromycin 50 / 100 disc per pack, 15 micrograms, , himedia, merck, b.d, biorad, oxoid rate per disc 42 antibiotic disc ceftibipirole 50 / 100 disc per pack, 30 micrograms, himedia, merck, b.d, biorad, oxoid rate per disc 43 antibiotic disc circle ( 6 antibiotics ) gram negative circle 2 the distance between center to center each disc 2.5 cm, disc size 6mm, himedia, pathoteq, merck, b.d, biorad, oxoid suitable for 100mm petriplates ( gentamicin 10mcg, amikacin 30mcg, doxycycline 30mcg, cotrimoxazole 25mcg, ciprofloxacin 5mcg, levofloxacin 5mcg, ) rate per circle 44 antibiotic disc circle ( 6 antibiotics ) acinetobacter circle 1 the distance between center to center each disc 2.5 cm, disc size 6mm, himedia, merck, b.d, biorad, oxoid suitable for 100mm petriplates ( piperacillin tazobactum 100 / 10 mcg. , ceftazidime 30 mcg, gentamicin 10mcg, amikacin 30mcg, , ciprofloxacin 5mcg, minocycline 30mcg ) rate per circle 45 antibiotic disc circle ( 6 antibiotics ) pseudomonas circle 1 the distance between center to center each disc 2.5 cm, disc size 6mm, himedia, pathoteq, merck, b.d, biorad, oxoid suitable for 100mm petriplates ( piperacillin tazobactum 100 / 10 mcg. , ceftazidime 30 mcg, cefepime 30 mcg, netilmicin 30 mcg, amikacin 30mcg, , levofloxacin 5mcg, ) rate per circle 46 antibiotic disc circle ( 6 antibiotics ) gram negative circle 1 the distance between center to center each disc 2.5 cm, disc size 6mm, himedia, pathoteq, merck, b.d, biorad, oxoid suitable for 100mm petriplates ( ampicillin 10mcg, cefotaxime 30mcg, cefepime 30mcg, ampicillin sulbactum 10 / 10mcg, cefaperazone sulbactum 75 / 10, piperacillin tazobactum 100 / 10mcg ) rate per circle 47 antibiotic disc circle ( 6 antibiotics ) gram positive circle 1 the distance between center to center each disc 2.5 cm, disc size 6mm, himedia, pathoteq, merck, b.d, biorad, oxoid suitable for 100mm petriplates ( penicillin g 10 u, cefoxitin 30mcg, ampicillin sulbactum 10 / 10mcg, clindamycin 2mcg*, erythromycin 15mcg* linezolid 30 mcg. *note: put clindamycin near erythromycin in outer circle ) rate per circle 48 antibiotic disc grepafloxacin 50 / 100 disc per pack, 5 micrograms, himedia, merck, b.d, biorad, oxoid rate per disc 49 antibiotic disc oritevancin 50 / 100 disc per pack, 30 micrograms, himedia, merck, b.d, biorad, oxoid rate per disc 50 antibiotic disc tedizolid 50 / 100 disc per pack, 30 micrograms, himedia, merck, b.d, biorad, oxoid rate per disc ... for more refer the documents......

Due Date : January 08, 2024

Tender Value : ₹ Ref. Documents

View Tender
37
Military Engineer Services - Gujarat

40876303 tender for provision of aluminium composite panel ( acp ) for admin building at icgs jakhau and mes office at cgra naliya. ; 1 s&f aluminium composite panel of 4mm thick exterior grade in wall / column / ceiling with combination of aluminium skin material of 0.25mm thick ( two or more metallic coloured coating sheet as directed ) aluminium sheet of alloy grade 1100 h14 cover material, coated on external side with pvdf coating containing 70% resins for anti fungal and anti bacterial properties and the center core shall be with natural polyethelene ( hdpe ) bonded to the aluminium skin on both side over aluminium frame of section 50 mm x 37 mm x 1.6 mm ( 16 gauge ) fixed on the wall / ceiling. cladding panel to be fixed with rawl plug and ss screw all as approved on walls and roof including necessary accessories, complete all as per manufacturers instructions and as directed by engr in charge 2 s&f italian letters of height 450mmand 60mm thickness with led dotted lights, fixed with ss screw on acp cladding and providing polished plain acrylic sheet having thickness of 2mm over the lettersall as directed by engr in charge. 3 s&f mes and coast guard computerised printed logo of600mm height, width upto 527 mm and 60mm thickness with led dotted lights, fixed with ss screw on acp cladding and providing polished plain acrylic sheet having thickness of 2mm over the logo all as directed by engr in charge. 4 m&l for point wiring with 1.5 sqmm, pvc insulated, unsheathed, multistranded copper conductor single core fr cable marked, drawn through and including pvc heavy duty concealed or surface conduit of min 20mm dia ( external ) including accessories like bends, tees and sunk type pressed steel terminal switch box 1.6mm thick with bakelite laminated sheet top cover 3mm thick, brass screws and cup washers including 1.5 sqmm stranded copper conductor pvc insulated green in colour as earth continuity conductor including making good disturbed surfaces complete all as specified and directed for one light point controlled by one switch 5 supply and fix recess mounted 36 / 34 watt led 2 x 2 luminaries white powder coated crca housing with leds, seamless front frame with flat white high transmission acrylic cover and fixed electronic driver ( surge protector ) including connecting up with driver, three core flexible copper conductor cables of suitable size complete all as specified and directed. 6 m&l for sub main wiring with two run of 4 sqmm single core, pvc insulated, unsheathed multistranded copper frls cable 1100 volts conductor drawn through surface rigid pvc conduit not less than 20 mm with all accessories and 4 sqmm pvc insulated unsheathed multistranded copper conductor frls cable as earth continuity wire complete all as specified and directed.note:two runs of main cable, one run of earth wire and one run of pvc conduit will be measured as one unit for payment. 7 s&f modular switch 1 way 6a, 1 module including modular cover plate with frame complete all as specified and directed. 8 m & l for ceiling rose surface bakelite 3 terminals 63.5 x 17 mm....

Due Date : January 02, 2024

Tender Value : ₹ 34 Lakhs

View Tender
39
Ministry Of Petroleum And Natural Gas - Gujarat

40658255 bids are invited for signages works at hplng chhara terminal backlit signboards with aluminium sheet side panels , backlit signboards with extruded aluminium side panels , vinyl sign boards , reflective sign boards , miscellaneous boards , 3 inch ms square pipe , pcc for grouting , main gate nomenclature in steel 3d moulded letters total quantity : 16326...

Due Date : November 29, 2023

Tender Value : ₹ Ref. Documents

View Tender
41
Western Railway - Gujarat

40308031 supply of aluminium square boom 32 feet long fabricated 1st section from 3mm, 2nd section from 2.5mm , 3rd & 4th section from 1.9 mm aluminium sheets die pressed to form tapering channel, as per rdso / spn / 208 / 2012 ver. 2.0 suitable for heidz india make elb gate machine. ( all 4nos section = 1 set ) . [ warranty period: 30 months after the date of delivery ] senior section gujarat 12.00 set...

Due Date : October 27, 2023

Tender Value : ₹ Ref. Documents

View Tender
43
Western Railway - Gujarat

40068133 supply of retro reflectiveretro reflective,retro reflective type warning board for neutral section 500 m of size 450x750x2 mm (pasted with non reflective sheet in blue colour and letters/symbols of retro reflective type iv high intensity prismatic sheeting in white colour) conforming to rdso specification.no. eti/ohe/33a (12/97) rev 8 or latest and similar to rdso drg. no.re/33/347 mod b or latest. [ warranty period: 30 months after the date of delivery ] , retro reflective type warning board for neutral section 250 m of size 450x750x2 mm (pasted with non reflective sheet in blue colour and letters/symbols of retro reflective type iv high intensity prismatic sheeting in white colour) conforming to rdso specification. no. eti/ohe/33a (12/97) rev 8 or latest and similar to rdso drg. no.re/33/355 mod b or latest. [ warranty period: 30 months after the date of delivery ] , retro reflective type memu dj close board as follows, switch on power plate with word memu made up of 2mm aluminium sheet of size 800 x 400 mm. pasted with reflective sheet in blue colour and letters/symbols of retro reflective type iv high intensity prismatic sheeting in white colour as per rdso spec no. eti/ohe/33a 12/97 rev. 8 or latest and similar to rdso drg.no re/33/349 mod b or latest. [ warranty period: 30 months after the date of delivery ] , retro reflective type power block working limit board size:450x450x2 mm as per rdso spec. no. eti/ohe/33a (12/97) rev 8 or latest. & similar to rdso drg no. eti/ohe/p/7574. [ warranty period: 30 months after the date of delivery ] , retro reflective type warning board [caution live wires] of size: 450 mm x 225mm x 2 mm as per rdso specification no: eti/ohe/33a [12/97] rev 8 or latest & similar as per rdso drawing no: eti/ohe/p/7541 (latest). [ warranty period: 30 months after the date of delivery ] page 1 of 4 run date/time: 07/10/2023 19:59:54adi div/western rly tender document , retro reflective type public caution board (3 language hindi, english...

Due Date : October 31, 2023

Tender Value : ₹ Ref. Documents

View Tender
45
Ministry Of Road Transport And Highways - Gujarat

39809278 tender for short term maintenance work between km. 0.000 to 22.800 of nh 953 songadh bardipada section of nh 953 in the state of gujarat; 2 providing spot reconditioning, reconstruction and regravelling to repair specific erosion or other damages for restoring the eroded area to originally constructed cross section on cuts and fills slopes / shoulders conformingtotechnicalspecificationsclauseno. 3002.fillmaterialshouldbebroughtfromborrow areas located outside row conforming to technical specification no. 305. watered and well compacted withplatecompactororpowerrammerwithall leads and lifts as directed by the engineer ( quantity ofcompactedfillmaterialtobemeasuredon cross sectional area basis ) 3 clearing and grubbing road land . ( clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. ) ( i ) by manual means;a. in area of light jungle 4 providing, laying and compacting granular sub base ( gsb ) withapprovedmaterialscompleteas per technicalspecificationsclause401conforming to table400 1asperapprovalof engineer in charge. ( for grading iii material ) 5 providing, laying and compacting wet mix macadam ( wmm ) base course with approved materials complete aspertechnicalspecificationsclauseno.406of morth & asperapprovalof engineer in charge. 6 providing, layingandcompactingdensegraded bituminousmacadamcompleteaspertechnical specificationclauseno.505includingtackcoatas per technical specifications clause no.503 using vg 40 grade bitumen ) [ for grade ii, bitumen@4.5% rate ] 7 providing, layingandcompactingbituminous concreteaspertechnicalspecificationclauseno. 507 including tack coat as per technical specifications clause no. 503 using vg 40 grade bitumen ) [ for grade ii, bitumen@5.4% rate ] 8 slurry seal providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( iii ) upto 1.5 mm thickness 9 slurry seal providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( ii ) 1.5 to 3.0 mm thickness 10 slurry seal : providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( i ) 3.0 to 5.0 mm thickness 11 fog seal : providing and applying low viscosity bitumen emulsion forsealingcrackslessthen3mmwideorincipient frettingordisintegrationinanexistingbitumenous surfacing complete as per morth specificaions clause 3004.3.2 and as per direction of the engineer in charge 12 restoration of rain cuts ( restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes ) 13 hire charges for jcb machine for removal of earth, debris, trees, plants, advertisement hoarding… etc. comp. including charges of driver, helper, fuel, oil etc. completed. 14 hire charges for hydraulic excavator / hitachi or equivalentmachine / crawler mounted excavator ( bucket capacity > 1.0 cum ) for removal of earth, debris, trees, plants, advertisement hoarding and other civil work etc. comp. including charges of operators, pol etc. 15 hire charges for tractor with trolly / blade on front and cultivator on back including diesel, oil, operator, helperetc. comp. for earth work, carriage, removal of debris etc. 16 supplying labour per day at site of work for different type of work as directed ( with tools and plants ) 17 bituminous cold mix ( including gravel emulsion ) ( providing, laying and rolling of bituminous cold mix on prepared base consisting of a mixture of unheated mineral aggregate and emulsified or cutback bitumen, including mixing in a plant of suitable type and capacity, transporting, laying, compacting and finishing to specified grades and levels. ) ( i ) using bitumen emulsion and 9.5 mm or 13.2 mm nominal size aggregate 18 repairtoalltypesofdamagedbrickmasonry work in superstructure and substructure of bridges / cd works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure using brickmasonry workincement mortar 1:3 completeinallrespectsasdirectedbytheengineer in charge conformingtomorth specifications clause no. 1000 and 1300. the rate quoted should be after due consideration of the salvage value of the dismantled material. 19 repairtoalltypesofdamagedstone masonry work in superstructure and substructure of bridges / cd works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure using random rubble masonry workincement mortar 1:3 completeinallrespectsasdirectedbytheengineer in charge conformingtomorth specifications clause no. 1000 and 1400. the rate quoted should be after due consideration of the salvage value of the dismantled material. 20 plain / reinforced cement concrete in sub structure complete as per drawing and technical specifications ( a ) pcc grade m15 21 plain / reinforced cement concrete in sub structure complete as per drawing and technical specifications ( f ) rcc grade m25 22 plain / reinforced cement concrete in super structure as per drawing and technical specification ( a ) grade m20 23 supplying, fitting and placing tmt bar fe 550d reinforcement complete as per drawing and technical specifications 24 applying epoxy mortar over leached honey combed and spalled concrete surface and exposed steel reinforcement complete as per technica l specifications clause 2804 and as per approval of the engineer. 25 guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per technical specification 26 providing and inserting nipples with approved fixing compound after drilling holes for grouting as per technical specifications including subsequent cutting / removal and sealing of the hole as necessary of nipples after completion of grouting with cement / epoxy 27 sealing of cracks / porous concrete by injection process through nipples / grouting complete as per technical specification. ( a ) cement grout 28 sealing of crack / porous concrete with epoxy grout by injection through nipples complete as per clause 2803.1. 29 gabian structure for erosion control, river training works and protection works ( providing and constructing gabain structures for erosion control, river training works and protection works with wire crates of size 2 m x 1 m x 0.3 m each divided into 1m compartments by cross netting, made from 4 mm galvanised steel wire @ 32 kg per 10 sqm having minimum tensile strength of 300 mpa conforming to is:280 and galvanizing coating conforming to is:4826, woven into mesh with double twist, mesh size not exceeding 100 mm x 100 mm, filled with boulders with least dimension of 200 mm, all loose ends to be securely tied with 4 mm galvanised steel wire. ) 30 laying reinforced cement concrete pipe np4 / prestrssed concrete pipe on first class bedding in single row . ( laying reinforced cement concrete pipe np4 / prestrssed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. ( a ) 1000 mm dia. 31 providing and laying stone pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications clause no. 2504 complete in all respects as directed by engineer 32 providing and laying of filter media with granular materials / stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. 33 providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and technical specification. 34 back filling behind abutment, wing wall and return wall complete as per drawing and technical specification ( a ) granular material 35 type a, w : metal beam crash barrier ( providing and erecting a w metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road / ground level, fixed on ismc series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to is:1367 and is:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 ) 36 road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface ( providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. ) 37 supply & fixing cats eye ( stimsonite ) made out acrilo beautile sterine injuction high compressed molding with reflector made of mmc prismatic type size 12cms. x 6cms x 2.5cms. provided with bituminous adhesive 100gms with each unit for fixing. 38 retro reflectorised traffic signs ( route marker sign / chevron board: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( xi ) 60 cm x 50 cm rectangular 39 hazard marker sign :direction and place identification signs upto 0.9 sqm size board. ( providing and erecting direction and place identification retro reflectorised sign asper irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing ) 40 retro reflectorised traffic signs ( cautionary / warning sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( iv ) 60 cm equilateral triangle 41 retro reflectorised traffic signs ( speed limit sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( viii ) 60 cm circular 42 retro reflectorised traffic signs ( village name board / accident prone zone sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( ix ) 90 cm x 75 cm rectangular 43 retro reflectorised traffic signs ( bump ahead / misc / name. ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( xii ) 60 cm x 45 cm rectangular 44 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( i ) 5th kilometre stone ( precast ) 45 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( ii ) ordinary kilometer stone ( precast ) 46 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( iii ) hectometer stone ( precast ) 47 applying two coats of geru & lime on tree up to 1.50 mtr height ( 1.20 mtr. geru + 0.30 mtr. lime including cost of labour, material etc. complete.for tree with all perimeter 48 painting two coats on new concrete surfaces ( painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ) 49 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( i ) ordinary kilometer stone 50 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( iii ) 5th kilometer stone. 51 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( iv ) hectometer stone ( 200m stone ) 52 numbering the c.d. work with approved paint including all materials for painting etc. complete 53 cleaning the existing black topped surface with shovel, brooms, etc. and disposing off the collected dirt / dustup to 100 metre away as directed by engineer in chargesetc. complete. 54 tree guard sign : providing & fixing sign board made out of 2mm aluminium sheet / 3mm acp ( aluminum composite panel ) , size 30cms diameter circle, pretreated with phospheting process and acid etching, painted with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with retro reflective sheeting as per latest m.o.s.t. specifications. a warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. ( a ) class c type 11 retro reflective sheeting 55 flexible median marker : providing and fixing of flexible median marker that are made of tough, high impact resistant, injection molded, thermoplastic body with property of flexibility to provide high durability. the dimension of flexible median marker should not exceed 18.4 cm in height ( including shank height ) , 12.5 cm in width. , 0.65 cm in thickness and shank depth shall be 3.4 cm the body structure shall be rounded at all its corners and edges. the plastic used for molding the flexible median marker should survive impact load of 5kg continuously for 750 times at room temperature. the logo of the manufacturer shall be embossed on either side of the body in the injection molding process. the median marker shall have flame like shaped body with, fluorescent yellow color retro reflective sheeting of size not less than 90 cm square, with fully reflective micro prismatic cube corners as its retro reflective elements as per irc 67 2012 and astm d4956 09 type xi specifications reflectivity values. the retro reflective sheeting shall be one or both sides of the flexible median marker and shall be edge protected with no exposed edges which will prevent edge lifting, vandalism, sheeting damage, etc. the flexible median marker shall be fixed by a combination of epoxy adhesive and grouting as recommended by manufacturer and engineer in charge. 56 rumble strips ( providing rumble strips covered with premix bituminous carpet, 15 20 mm high at center, 250 mm wide at ocations sugeested by authority to control speed, marked with white strips of road marking paint.nos. and spacing as directed by engineer incharge. 57 providing and fixing pre cast rubber dye inter locking concrete block 60mm thick with grade of concrete m200 pnumatic compressed by mechanically pressed and as per approved design including 75mm sand layer / mixing of stone dust and 2 4mm grit pareticle for levelling and filling the joint with sand in proper line and level etc complete....

Due Date : September 29, 2023

Tender Value : ₹ 3.93 Crore

View Tender
46
Ministry Of Road Transport And Highways - Gujarat

39809015 short term maintenance work between km. 507 / 300 to 535 / 500 of n.h. 56 ( movi netrang kelikuva section ) in the state of gujarat.; 2 providing spot reconditioning, reconstruction and regravelling to repair specific erosion or other damages for restoring the eroded area to originally constructed cross section on cuts and fills slopes / shoulders conformingtotechnicalspecificationsclauseno. 3002.fillmaterialshouldbebroughtfromborrow areas located outside row conforming to technical specification no. 305. watered and well compacted withplatecompactororpowerrammerwithall leads and lifts as directed by the engineer ( quantity ofcompactedfillmaterialtobemeasuredon cross sectional area basis ) 3 clearing and grubbing road land . ( clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. ) ( i ) by manual means;a. in area of light jungle 4 providing, laying and compacting granular sub base ( gsb ) withapprovedmaterialscompleteas per technicalspecificationsclause401conforming to table400 1asperapprovalof engineer in charge. ( for grading iii material ) 5 providing, laying and compacting wet mix macadam ( wmm ) base course with approved materials complete aspertechnicalspecificationsclauseno.406of morth & asperapprovalof engineer in charge. 6 providing, layingandcompactingdensegraded bituminousmacadamcompleteaspertechnical specificationclauseno.505includingtackcoatas per technical specifications clause no.503 using vg 40 grade bitumen ) [ for grade ii, bitumen@4.5% rate ] 7 providing, layingandcompactingbituminous concreteaspertechnicalspecificationclauseno. 507 including tack coat as per technical specifications clause no. 503 using vg 40 grade bitumen ) [ for grade ii, bitumen@5.4% rate ] 8 slurry seal providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( iii ) upto 1.5 mm thickness 9 slurry seal providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( ii ) 1.5 to 3.0 mm thickness 10 slurry seal : providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( i ) 3.0 to 5.0 mm thickness 11 fog seal : providing and applying low viscosity bitumen emulsion forsealingcrackslessthen3mmwideorincipient frettingordisintegrationinanexistingbitumenous surfacing complete as per morth specificaions clause 3004.3.2 and as per direction of the engineer in charge 12 restoration of rain cuts ( restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes ) 13 hire charges for jcb machine for removal of earth, debris, trees, plants, advertisement hoarding… etc. comp. including charges of driver, helper, fuel, oil etc. completed. 14 hire charges for hydraulic excavator / hitachi or equivalentmachine / crawler mounted excavator ( bucket capacity > 1.0 cum ) for removal of earth, debris, trees, plants, advertisement hoarding and other civil work etc. comp. including charges of operators, pol etc. 15 hire charges for tractor with trolly / blade on front and cultivator on back including diesel, oil, operator, helperetc. comp. for earth work, carriage, removal of debris etc. 16 supplying labour per day at site of work for different type of work as directed ( with tools and plants ) 17 bituminous cold mix ( including gravel emulsion ) ( providing, laying and rolling of bituminous cold mix on prepared base consisting of a mixture of unheated mineral aggregate and emulsified or cutback bitumen, including mixing in a plant of suitable type and capacity, transporting, laying, compacting and finishing to specified grades and levels. ) ( i ) using bitumen emulsion and 9.5 mm or 13.2 mm nominal size aggregate 18 repairtoalltypesofdamagedbrickmasonry work in superstructure and substructure of bridges / cd works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure using brickmasonry workincement mortar 1:3 completeinallrespectsasdirectedbytheengineer in charge conformingtomorth specifications clause no. 1000 and 1300. the rate quoted should be after due consideration of the salvage value of the dismantled material. 19 repairtoalltypesofdamagedstone masonry work in superstructure and substructure of bridges / cd works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure using random rubble masonry workincement mortar 1:3 completeinallrespectsasdirectedbytheengineer in charge conformingtomorth specifications clause no. 1000 and 1400. the rate quoted should be after due consideration of the salvage value of the dismantled material. 20 plain / reinforced cement concrete in sub structure complete as per drawing and technical specifications ( a ) pcc grade m15 21 plain / reinforced cement concrete in sub structure complete as per drawing and technical specifications ( f ) rcc grade m25 22 plain / reinforced cement concrete in super structure as per drawing and technical specification ( a ) grade m20 23 supplying, fitting and placing tmt bar fe 550d reinforcement complete as per drawing and technical specifications 24 applying epoxy mortar over leached honey combed and spalled concrete surface and exposed steel reinforcement complete as per technica l specifications clause 2804 and as per approval of the engineer. 25 guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per technical specification 26 providing and inserting nipples with approved fixing compound after drilling holes for grouting as per technical specifications including subsequent cutting / removal and sealing of the hole as necessary of nipples after completion of grouting with cement / epoxy 27 sealing of cracks / porous concrete by injection process through nipples / grouting complete as per technical specification. ( a ) cement grout 28 sealing of crack / porous concrete with epoxy grout by injection through nipples complete as per clause 2803.1. 29 gabian structure for erosion control, river training works and protection works ( providing and constructing gabain structures for erosion control, river training works and protection works with wire crates of size 2 m x 1 m x 0.3 m each divided into 1m compartments by cross netting, made from 4 mm galvanised steel wire @ 32 kg per 10 sqm having minimum tensile strength of 300 mpa conforming to is:280 and galvanizing coating conforming to is:4826, woven into mesh with double twist, mesh size not exceeding 100 mm x 100 mm, filled with boulders with least dimension of 200 mm, all loose ends to be securely tied with 4 mm galvanised steel wire. ) 30 laying reinforced cement concrete pipe np4 / prestrssed concrete pipe on first class bedding in single row . ( laying reinforced cement concrete pipe np4 / prestrssed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. ( a ) 1000 mm dia. 31 providing and laying stone pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications clause no. 2504 complete in all respects as directed by engineer 32 providing and laying of filter media with granular materials / stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. 33 providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and technical specification. 34 back filling behind abutment, wing wall and return wall complete as per drawing and technical specification ( a ) granular material 35 type a, w : metal beam crash barrier ( providing and erecting a w metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road / ground level, fixed on ismc series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to is:1367 and is:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 ) 36 road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface ( providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. ) 37 supply & fixing cats eye ( stimsonite ) made out acrilo beautile sterine injuction high compressed molding with reflector made of mmc prismatic type size 12cms. x 6cms x 2.5cms. provided with bituminous adhesive 100gms with each unit for fixing. 38 retro reflectorised traffic signs ( route marker sign / chevron board: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( xi ) 60 cm x 50 cm rectangular 39 hazard marker sign :direction and place identification signs upto 0.9 sqm size board. ( providing and erecting direction and place identification retro reflectorised sign asper irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing ) 40 retro reflectorised traffic signs ( cautionary / warning sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( iv ) 60 cm equilateral triangle 41 retro reflectorised traffic signs ( speed limit sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( viii ) 60 cm circular 42 retro reflectorised traffic signs ( village name board / accident prone zone sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( ix ) 90 cm x 75 cm rectangular 43 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( i ) 5th kilometre stone ( precast ) 44 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( ii ) ordinary kilometer stone ( precast ) 45 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( iii ) hectometer stone ( precast ) 46 applying two coats of geru & lime on tree up to 1.50 mtr height ( 1.20 mtr. geru + 0.30 mtr. lime including cost of labour, material etc. complete.for tree with all perimeter 47 painting two coats on new concrete surfaces ( painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ) 48 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( i ) ordinary kilometer stone 49 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( iii ) 5th kilometer stone. 50 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( iv ) hectometer stone ( 200m stone ) 51 numbering the c.d. work with approved paint including all materials for painting etc. complete 52 cleaning the existing black topped surface with shovel, brooms, etc. and disposing off the collected dirt / dustup to 100 metre away as directed by engineer in chargesetc. complete. 53 tree guard sign : providing & fixing sign board made out of 2mm aluminium sheet / 3mm acp ( aluminum composite panel ) , size 30cms diameter circle, pretreated with phospheting process and acid etching, painted with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with retro reflective sheeting as per latest m.o.s.t. specifications. a warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. ( a ) class c type 11 retro reflective sheeting 54 rumble strips ( providing rumble strips covered with premix bituminous carpet, 15 20 mm high at center, 250 mm wide at ocations sugeested by authority to control speed, marked with white strips of road marking paint.nos. and spacing as directed by engineer incharge....

Due Date : September 29, 2023

Tender Value : ₹ 6.07 Crore

View Tender
47
Ministry Of Road Transport And Highways - Gujarat

39809001 short term maintenance work between km. 535 / 500 to 566.900 of n.h. 56 ( kelikuva zankhwav mandvi section ) in the state of gujarat. ; 2 providing spot reconditioning, reconstruction and regravelling to repair specific erosion or other damages for restoring the eroded area to originally constructed cross section on cuts and fills slopes / shoulders conformingtotechnicalspecificationsclauseno. 3002.fillmaterialshouldbebroughtfromborrow areas located outside row conforming to technical specification no. 305. watered and well compacted withplatecompactororpowerrammerwithall leads and lifts as directed by the engineer ( quantity ofcompactedfillmaterialtobemeasuredon cross sectional area basis ) 3 clearing and grubbing road land . ( clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. ) ( i ) by manual means;a. in area of light jungle 4 providing, laying and compacting granular sub base ( gsb ) withapprovedmaterialscompleteas per technicalspecificationsclause401conforming to table400 1asperapprovalof engineer in charge. ( for grading iii material ) 5 providing, laying and compacting wet mix macadam ( wmm ) base course with approved materials complete aspertechnicalspecificationsclauseno.406of morth & asperapprovalof engineer in charge. 6 providing, layingandcompactingdensegraded bituminousmacadamcompleteaspertechnical specificationclauseno.505includingtackcoatas per technical specifications clause no.503 using vg 40 grade bitumen ) [ for grade ii, bitumen@4.5% rate ] 7 providing, layingandcompactingbituminous concreteaspertechnicalspecificationclauseno. 507 including tack coat as per technical specifications clause no. 503 using vg 40 grade bitumen ) [ for grade ii, bitumen@5.4% rate ] 8 slurry seal providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( iii ) upto 1.5 mm thickness 9 slurry seal providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( ii ) 1.5 to 3.0 mm thickness 10 slurry seal : providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( i ) 3.0 to 5.0 mm thickness 11 restoration of rain cuts ( restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes ) 12 hire charges for jcb machine for removal of earth, debris, trees, plants, advertisement hoarding… etc. comp. including charges of driver, helper, fuel, oil etc. completed. 13 hire charges for hydraulic excavator / hitachi or equivalentmachine / crawler mounted excavator ( bucket capacity > 1.0 cum ) for removal of earth, debris, trees, plants, advertisement hoarding and other civil work etc. comp. including charges of operators, pol etc. 14 hire charges for tractor with trolly / blade on front and cultivator on back including diesel, oil, operator, helperetc. comp. for earth work, carriage, removal of debris etc. 15 supplying labour per day at site of work for different type of work as directed ( with tools and plants ) 16 repairtoalltypesofdamagedbrickmasonry work in superstructure and substructure of bridges / cd works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure using brickmasonry workincement mortar 1:3 completeinallrespectsasdirectedbytheengineer in charge conformingtomorth specifications clause no. 1000 and 1300. the rate quoted should be after due consideration of the salvage value of the dismantled material. 17 repairtoalltypesofdamagedstone masonry work in superstructure and substructure of bridges / cd works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure using random rubble masonry workincement mortar 1:3 completeinallrespectsasdirectedbytheengineer in charge conformingtomorth specifications clause no. 1000 and 1400. the rate quoted should be after due consideration of the salvage value of the dismantled material. 18 plain / reinforced cement concrete in sub structure complete as per drawing and technical specifications ( a ) pcc grade m15 19 plain / reinforced cement concrete in sub structure complete as per drawing and technical specifications ( f ) rcc grade m25 20 plain / reinforced cement concrete in super structure as per drawing and technical specification ( a ) grade m20 21 supplying, fitting and placing tmt bar fe 550d reinforcement complete as per drawing and technical specifications 22 applying epoxy mortar over leached honey combed and spalled concrete surface and exposed steel reinforcement complete as per technica l specifications clause 2804 and as per approval of the engineer. 23 guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per technical specification 24 providing and inserting nipples with approved fixing compound after drilling holes for grouting as per technical specifications including subsequent cutting / removal and sealing of the hole as necessary of nipples after completion of grouting with cement / epoxy 25 sealing of cracks / porous concrete by injection process through nipples / grouting complete as per technical specification. ( a ) cement grout 26 sealing of crack / porous concrete with epoxy grout by injection through nipples complete as per clause 2803.1. 27 laying reinforced cement concrete pipe np4 / prestrssed concrete pipe on first class bedding in single row . ( laying reinforced cement concrete pipe np4 / prestrssed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. ( a ) 1000 mm dia. 28 providing and laying stone pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications clause no. 2504 complete in all respects as directed by engineer 29 providing and laying of filter media with granular materials / stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. 30 back filling behind abutment, wing wall and return wall complete as per drawing and technical specification ( a ) granular material 31 type a, w : metal beam crash barrier ( providing and erecting a w metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road / ground level, fixed on ismc series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to is:1367 and is:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 ) 32 road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface ( providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. ) 33 supply & fixing cats eye ( stimsonite ) made out acrilo beautile sterine injuction high compressed molding with reflector made of mmc prismatic type size 12cms. x 6cms x 2.5cms. provided with bituminous adhesive 100gms with each unit for fixing. 34 retro reflectorised traffic signs ( route marker sign / chevron board: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( xi ) 60 cm x 50 cm rectangular 35 hazard marker sign :direction and place identification signs upto 0.9 sqm size board. ( providing and erecting direction and place identification retro reflectorised sign asper irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing ) 36 retro reflectorised traffic signs ( cautionary / warning sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( iv ) 60 cm equilateral triangle 37 retro reflectorised traffic signs ( speed limit sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( viii ) 60 cm circular 38 retro reflectorised traffic signs ( village name board / accident prone zone sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( ix ) 90 cm x 75 cm rectangular 39 retro reflectorised traffic signs ( bump ahead / misc / name. ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( xii ) 60 cm x 45 cm rectangular 40 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( i ) 5th kilometre stone ( precast ) 41 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( ii ) ordinary kilometer stone ( precast ) 42 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( iii ) hectometer stone ( precast ) 43 applying two coats of geru & lime on tree up to 1.50 mtr height ( 1.20 mtr. geru + 0.30 mtr. lime including cost of labour, material etc. complete.for tree with all perimeter 44 painting two coats on new concrete surfaces ( painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ) 45 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( i ) ordinary kilometer stone 46 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( iii ) 5th kilometer stone. 47 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( iv ) hectometer stone ( 200m stone ) 48 numbering the c.d. work with approved paint including all materials for painting etc. complete 49 cleaning the existing black topped surface with shovel, brooms, etc. and disposing off the collected dirt / dustup to 100 metre away as directed by engineer in chargesetc. complete. 50 tree guard sign : providing & fixing sign board made out of 2mm aluminium sheet / 3mm acp ( aluminum composite panel ) , size 30cms diameter circle, pretreated with phospheting process and acid etching, painted with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with retro reflective sheeting as per latest m.o.s.t. specifications. a warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. ( a ) class c type 11 retro reflective sheeting 51 rumble strips ( providing rumble strips covered with premix bituminous carpet, 15 20 mm high at center, 250 mm wide at ocations sugeested by authority to control speed, marked with white strips of road marking paint.nos. and spacing as directed by engineer incharge. 52 providing and fixing pre cast rubber dye inter locking concrete block 60mm thick with grade of concrete m200 pnumatic compressed by mechanically pressed and as per approved design including 75mm sand layer / mixing of stone dust and 2 4mm grit pareticle for levelling and filling the joint with sand in proper line and level etc complete....

Due Date : September 29, 2023

Tender Value : ₹ 6.79 Crore

View Tender
48
Ministry Of Road Transport And Highways - Gujarat

39808968 tender for short term maintenance work between km. 572.000 to 604.000 ( tarsada kanja vyara kapura section ) of n.h. 56 in the state of gujarat.; 2 providing spot reconditioning, reconstruction and regravelling to repair specific erosion or other damages for restoring the eroded area to originally constructed cross section on cuts and fills slopes / shoulders conformingtotechnicalspecificationsclauseno. 3002.fillmaterialshouldbebroughtfromborrow areas located outside row conforming to technical specification no. 305. watered and well compacted withplatecompactororpowerrammerwithall leads and lifts as directed by the engineer ( quantity ofcompactedfillmaterialtobemeasuredon cross sectional area basis ) 3 clearing and grubbing road land . ( clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. ) ( i ) by manual means;a. in area of light jungle 4 providing, laying and compacting granular sub base ( gsb ) withapprovedmaterialscompleteas per technicalspecificationsclause401conforming to table400 1asperapprovalof engineer in charge. ( for grading iii material ) 5 providing, laying and compacting wet mix macadam ( wmm ) base course with approved materials complete aspertechnicalspecificationsclauseno.406of morth & asperapprovalof engineer in charge. 6 providing, layingandcompactingdensegraded bituminousmacadamcompleteaspertechnical specificationclauseno.505includingtackcoatas per technical specifications clause no.503 using vg 40 grade bitumen ) [ for grade ii, bitumen@4.5% rate ] 7 providing, layingandcompactingbituminous concreteaspertechnicalspecificationclauseno. 507 including tack coat as per technical specifications clause no. 503 using vg 40 grade bitumen ) [ for grade ii, bitumen@5.4% rate ] 8 slurry seal providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( iii ) upto 1.5 mm thickness 9 slurry seal providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( ii ) 1.5 to 3.0 mm thickness 10 slurry seal : providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface ) ( i ) 3.0 to 5.0 mm thickness 11 fog seal : providing and applying low viscosity bitumen emulsion forsealingcrackslessthen3mmwideorincipient frettingordisintegrationinanexistingbitumenous surfacing complete as per morth specificaions clause 3004.3.2 and as per direction of the engineer in charge 12 restoration of rain cuts ( restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes ) 13 hire charges for jcb machine for removal of earth, debris, trees, plants, advertisement hoarding… etc. comp. including charges of driver, helper, fuel, oil etc. completed. 14 hire charges for hydraulic excavator / hitachi or equivalentmachine / crawler mounted excavator ( bucket capacity > 1.0 cum ) for removal of earth, debris, trees, plants, advertisement hoarding and other civil work etc. comp. including charges of operators, pol etc. 15 hire charges for tractor with trolly / blade on front and cultivator on back including diesel, oil, operator, helperetc. comp. for earth work, carriage, removal of debris etc. 16 supplying labour per day at site of work for different type of work as directed ( with tools and plants ) 17 repairtoalltypesofdamagedbrickmasonry work in superstructure and substructure of bridges / cd works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure using brickmasonry workincement mortar 1:3 completeinallrespectsasdirectedbytheengineer in charge conformingtomorth specifications clause no. 1000 and 1300. the rate quoted should be after due consideration of the salvage value of the dismantled material. 18 repairtoalltypesofdamagedstone masonry work in superstructure and substructure of bridges / cd works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure using random rubble masonry workincement mortar 1:3 completeinallrespectsasdirectedbytheengineer in charge conformingtomorth specifications clause no. 1000 and 1400. the rate quoted should be after due consideration of the salvage value of the dismantled material. 19 plain / reinforced cement concrete in sub structure complete as per drawing and technical specifications ( a ) pcc grade m15 20 plain / reinforced cement concrete in sub structure complete as per drawing and technical specifications ( f ) rcc grade m25 21 plain / reinforced cement concrete in super structure as per drawing and technical specification ( a ) grade m20 22 supplying, fitting and placing tmt bar fe 550d reinforcement complete as per drawing and technical specifications 23 applying epoxy mortar over leached honey combed and spalled concrete surface and exposed steel reinforcement complete as per technica l specifications clause 2804 and as per approval of the engineer. 24 guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per technical specification 25 providing and inserting nipples with approved fixing compound after drilling holes for grouting as per technical specifications including subsequent cutting / removal and sealing of the hole as necessary of nipples after completion of grouting with cement / epoxy 26 sealing of cracks / porous concrete by injection process through nipples / grouting complete as per technical specification. ( a ) cement grout 27 sealing of crack / porous concrete with epoxy grout by injection through nipples complete as per clause 2803.1. 28 gabian structure for erosion control, river training works and protection works ( providing and constructing gabain structures for erosion control, river training works and protection works with wire crates of size 2 m x 1 m x 0.3 m each divided into 1m compartments by cross netting, made from 4 mm galvanised steel wire @ 32 kg per 10 sqm having minimum tensile strength of 300 mpa conforming to is:280 and galvanizing coating conforming to is:4826, woven into mesh with double twist, mesh size not exceeding 100 mm x 100 mm, filled with boulders with least dimension of 200 mm, all loose ends to be securely tied with 4 mm galvanised steel wire. ) 29 laying reinforced cement concrete pipe np4 / prestrssed concrete pipe on first class bedding in single row . ( laying reinforced cement concrete pipe np4 / prestrssed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. ( a ) 1000 mm dia. 30 providing and laying stone pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications clause no. 2504 complete in all respects as directed by engineer 31 providing and laying of filter media with granular materials / stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. 32 back filling behind abutment, wing wall and return wall complete as per drawing and technical specification ( a ) granular material 33 type a, w : metal beam crash barrier ( providing and erecting a w metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road / ground level, fixed on ismc series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to is:1367 and is:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 ) 34 road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface ( providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. ) 35 supply & fixing cats eye ( stimsonite ) made out acrilo beautile sterine injuction high compressed molding with reflector made of mmc prismatic type size 12cms. x 6cms x 2.5cms. provided with bituminous adhesive 100gms with each unit for fixing. 36 retro reflectorised traffic signs ( route marker sign / chevron board: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( xi ) 60 cm x 50 cm rectangular 37 hazard marker sign :direction and place identification signs upto 0.9 sqm size board. ( providing and erecting direction and place identification retro reflectorised sign asper irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing ) 38 retro reflectorised traffic signs ( cautionary / warning sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( iv ) 60 cm equilateral triangle 39 retro reflectorised traffic signs ( speed limit sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( viii ) 60 cm circular 40 retro reflectorised traffic signs ( bump ahead / misc / name. ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( xii ) 60 cm x 45 cm rectangular 41 retro reflectorised traffic signs ( village name board / accident prone zone sign: ) ( providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing ) ( ix ) 90 cm x 75 cm rectangular 42 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( i ) 5th kilometre stone ( precast ) 43 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( ii ) ordinary kilometer stone ( precast ) 44 kilo metre stone ( reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc ) ( iii ) hectometer stone ( precast ) 45 applying two coats of geru & lime on tree up to 1.50 mtr height ( 1.20 mtr. geru + 0.30 mtr. lime including cost of labour, material etc. complete.for tree with all perimeter 46 painting two coats on new concrete surfaces ( painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ) 47 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( i ) ordinary kilometer stone 48 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( iii ) 5th kilometer stone. 49 painting and printing letters on kilometer stone 3 coats with synthetic enamel paint. ( iv ) hectometer stone ( 200m stone ) 50 numbering the c.d. work with approved paint including all materials for painting etc. complete 51 cleaning the existing black topped surface with shovel, brooms, etc. and disposing off the collected dirt / dustup to 100 metre away as directed by engineer in chargesetc. complete. 52 tree guard sign : providing & fixing sign board made out of 2mm aluminium sheet / 3mm acp ( aluminum composite panel ) , size 30cms diameter circle, pretreated with phospheting process and acid etching, painted with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with retro reflective sheeting as per latest m.o.s.t. specifications. a warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. ( a ) class c type 11 retro reflective sheeting 53 flexible median marker : providing and fixing of flexible median marker that are made of tough, high impact resistant, injection molded, thermoplastic body with property of flexibility to provide high durability. the dimension of flexible median marker should not exceed 18.4 cm in height ( including shank height ) , 12.5 cm in width. , 0.65 cm in thickness and shank depth shall be 3.4 cm the body structure shall be rounded at all its corners and edges. the plastic used for molding the flexible median marker should survive impact load of 5kg continuously for 750 times at room temperature. the logo of the manufacturer shall be embossed on either side of the body in the injection molding process. the median marker shall have flame like shaped body with, fluorescent yellow color retro reflective sheeting of size not less than 90 cm square, with fully reflective micro prismatic cube corners as its retro reflective elements as per irc 67 2012 and astm d4956 09 type xi specifications reflectivity values. the retro reflective sheeting shall be one or both sides of the flexible median marker and shall be edge protected with no exposed edges which will prevent edge lifting, vandalism, sheeting damage, etc. the flexible median marker shall be fixed by a combination of epoxy adhesive and grouting as recommended by manufacturer and engineer in charge. 54 rumble strips ( providing rumble strips covered with premix bituminous carpet, 15 20 mm high at center, 250 mm wide at ocations sugeested by authority to control speed, marked with white strips of road marking paint.nos. and spacing as directed by engineer incharge. 55 providing and fixing pre cast rubber dye inter locking concrete block 60mm thick with grade of concrete m200 pnumatic compressed by mechanically pressed and as per approved design including 75mm sand layer / mixing of stone dust and 2 4mm grit pareticle for levelling and filling the joint with sand in proper line and level etc complete....

Due Date : September 29, 2023

Tender Value : ₹ 6.79 Crore

View Tender
49
Department Of Labor And Employment - Gujarat

39614125 bids are invited for ferrous and non ferrous group m.s. flat 50 x 2 mm , m.s. flat 100 x 2 mm , brass sheet 50 x 3 mm , alluminium sheet 50 x 3 mm , s.s. sheet 50 x 2 mm , m.s. electrode dia 3.15 mm, 1 pkt equals to 100 no , m.s. electrode dia 4 mm, 1 pkt equals to 100 no , m.s. flat 50 x 3 mm , m.s. flat 65 x 6 mm , m.s. roundbar dia 24 mm , m.s. roundbar dia 25 mm , m.s. roundbar dia 45 mm , m.s. c channel 25 x 3 mm , m.s. c channel 75 x 40 mm , m.s. pipe dia 25 x 3 mm , m.s. square bar 25 x 25 mm total quantity : 110...

Due Date : October 03, 2023

Tender Value : ₹ Ref. Documents

View Tender