43532857
tender for services for regular crane jobs smp1 2000143080 190 10 10 repla. of crane wheels size over 800 mm 24 no email : bhavik.prajapati@amns.in contact : name : bhavik prajapati item details : replacement of drive wheel dia.800 sr. no.,,descriptions,, 1,,tools & tackles shifting from designated area to crane walkway.,, 2,,safety tool box talk relates to cleaning, cutting, lifting & rigging, welding & dust dumping activities.,, 3,,spare wheel to be shifted from workshop to crane walkway at required location with hydra & service hoist.,, 4,,positioning of crane and provide the mechanical stopper on lt rail to prevent another crane movement of while work under progress.,, 5,,removal of housing bolts as well as floating shaft coupling bolts.,, 6,,lifting of wheel by help of jack & pump.,, 7,,removal of wheel and taking it out by help of chain pulley block.,, 8,,positioning of new wheel by chain pulley block and aligning with housing.,, 9,,fixing of housing bolt and flating shaft coupling bolts by lowering jack simultaneously.,, 10,,trial taking and check for any abnormility.,, 11,,shift the removed wheel from crane walkway to workshop with hydra & service hoist.,, 12,,remove prepared scaffolding, if any. ensure no loose material lying on crane, walkway & working area.,, 13,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, 14,,adhere the standard maintenance practice (smp/sop) of respective crane assembly replacement,, ,, important note:,, ,, ,, ,, ,, ,, ,, ,, a.,,use all the ppe required at smp1 (frp helmet, frp jacket, safety shoe, safety goggles, safety hand gloves and nose mask). safety is vendor’s responsibility. amnsi will explain hazards in the job during tbt / hirac discussion. vendor has to monitor behaviour of associates periodically from hse point of view and ensure required correction. all the associate must have height pass. height pass will be issued by am/ns safety department. ,, ,, b.,,consumable + welding m/c + cutting set + tools + tackles + housekeeping will be in vendors scope.,, ,, c.,,use e 7018 welding electrodes for all the welding jobs.,, ,, ,, ,, d.,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, e. ,,movement of manpower / associates at our hazira site. 1. no pedestrian/cycles/two wheelers movement will be allowed inside the plant premises. 2. vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. the movement of persons page 2 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details inside the plant by foot/bicycle/two wheelers is prohibited. other terms: associate has to undergo medical fitness at our care nursing home, am/ns township, hazira. this would be done as per am/ns india standards and the cost shall be borne by the vendor. amns has its own secures access system called scrum at hazira site which is use for processing the gate pass.,, ,, f.,,penalty for non compliance: penalty will be recovered from the monthly payment if vendor is not able to achieve required service levels as mentioned below: if vendor will delay in job execution / equipment refurbishment as per plant requirement. job to be carried out anytime (24x7, 365days). if vendor does not deploy the required specified quantity & quality of manpower as per rfq or a person deployed is not reporting to the duty. while normal duty hours are 8 per day, more than 16 hours continuous duty is not allowed on any day. if safety violation during job execution. minimum 3% penalty will be applicable on a monthly bill value. penalty in two consecutive months will make contractor eligible for either termination of contract or penalty more than 10%.,, item note : 2 2000143080 200 20 10 repla. of crane wheels size over 800 mm 48 no email : bhavik.prajapati@amns.in contact : name : bhavik prajapati item details : replacement of idle wheel dia.800 sr. no.,,descriptions,, 1,,tools & tackles shifting from designated area to crane walkway.,, 2,,safety tool box talk relates to cleaning, cutting, lifting & rigging, welding & dust dumping activities.,, 3,,spare wheel to be shifted from workshop to crane walkway at required location with hydra & service hoist.,, 4,,positioning of crane and provide the mechanical stopper on lt rail to prevent another crane movement of while work under progress.,, 5,,removal of housing bolts.,, 6,,lifting of wheel by help of jack & pump.,, 7,,removal of wheel and taking it out by help of chain pulley block.,, 8,,positioning of new wheel by chain pulley block and aligning with housing.,, 9,,fixing of housing bolt by lowering jack simultaneously.,, 10,,trial taking and check for any abnormility.,, 11,,shift the removed wheel from crane walkway to workshop with hydra & service hoist.,, 12,,remove prepared scaffolding, if any. ensure no loose material lying on crane, walkway & working area.,, 13,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, 14,,adhere the standard maintenance practice (smp/sop) of respective crane assembly replacement,, ,, important note:,, ,, ,, ,, ,, ,, ,, ,, ,, a.,,use all the ppe required at smp1 (frp helmet, frp jacket, safety shoe, safety goggles, safety hand gloves and nose mask). safety is vendor’s responsibility. amnsi will explain hazards in the job during tbt / hirac discussion. vendor has to monitor behaviour of associates periodically from hse point of view and ensure required correction. all the associate must have height pass. height pass will be issued by am/ns safety department. ,, ,, b.,,consumable + welding m/c + cutting set + tools + tackles + housekeeping will be in vendors scope.,, ,, c.,,use e 7018 welding electrodes for all the welding jobs.,, ,, ,, ,, page 3 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details d.,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, ,, e. ,,movement of manpower / associates at our hazira site. 1. no pedestrian/cycles/two wheelers movement will be allowed inside the plant premises. 2. vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. the movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. other terms: associate has to undergo medical fitness at our care nursing home, am/ns township, hazira. this would be done as per am/ns india standards and the cost shall be borne by the vendor. amns has its own secures access system called scrum at hazira site which is use for processing the gate pass.,, ,, f.,,penalty for non compliance: penalty will be recovered from the monthly payment if vendor is not able to achieve required service levels as mentioned below: if vendor will delay in job execution / equipment refurbishment as per plant requirement. job to be carried out anytime (24x7, 365days). if vendor does not deploy the required specified quantity & quality of manpower as per rfq or a person deployed is not reporting to the duty. while normal duty hours are 8 per day, more than 16 hours continuous duty is not allowed on any day. if safety violation during job execution. minimum 3% penalty will be applicable on a monthly bill value. penalty in two consecutive months will make contractor eligible for either termination of contract or penalty more than 10%.,, item note : 3 2000143080 210 30 10 dia 800 mm wheel overhauling (lt+idle) 72 no email : bhavik.prajapati@amns.in contact : name : bhavik prajapati item details : overhauling of 800dia. wheel assembly sr. no.,,descriptions,, 1,,tools & tackles shifting from designated area to workshop.,, 2,,safety tool box talk relates to cleaning, welding, cutting, lifting & rigging activities.,, 3,,positioning of used / spare wheel, bearings etc at designated place. ,, 4,,dismalting of used wheel housing, bearing etc.,, 5,,cleaning of wheel, housing, cover and other parts of wheel assy.,, 6,,thorough inspection of wheel & assy parts before assy.,, 7,,heating of bearing and fixing along with other parts.,, 8,,heating and fixing of coupling on axle for drive wheel.,, 9,,after cooling down lubrication to be done with grease pump.,, 10,,shifting of wheel at crane walkway with help of hydra & service hoist.,, 11,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, 12,,adhere the standard maintenance practice (smp/sop) of respective crane assembly replacement,, ,, important note:,, ,, ,, ,, ,, ,, ,, ,, a.,,use all the ppe required at smp1 (frp helmet, frp jacket, safety shoe, safety goggles, safety hand gloves and nose mask). safety is vendor’s responsibility. amnsi will explain hazards in the job during tbt / hirac discussion. vendor has to monitor behaviour of associates periodically from hse point of view and ensure required correction. all the associate must have height pass. height pass will be issued by page 4 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details am/ns safety department. ,, b.,,consumable + welding m/c + cutting set + tools + tackles + housekeeping will be in vendors scope.,, ,, c.,,use e 7018 welding electrodes for all the welding jobs.,, ,, ,, ,, d.,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, ,, e. ,,movement of manpower / associates at our hazira site. 1. no pedestrian/cycles/two wheelers movement will be allowed inside the plant premises. 2. vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. the movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. other terms: associate has to undergo medical fitness at our care nursing home, am/ns township, hazira. this would be done as per am/ns india standards and the cost shall be borne by the vendor. amns has its own secures access system called scrum at hazira site which is use for processing the gate pass.,, ,, f.,,penalty for non compliance: penalty will be recovered from the monthly payment if vendor is not able to achieve required service levels as mentioned below: if vendor will delay in job execution / equipment refurbishment as per plant requirement. job to be carried out anytime (24x7, 365days). if vendor does not deploy the required specified quantity & quality of manpower as per rfq or a person deployed is not reporting to the duty. while normal duty hours are 8 per day, more than 16 hours continuous duty is not allowed on any day. if safety violation during job execution. minimum 3% penalty will be applicable on a monthly bill value. penalty in two consecutive months will make contractor eligible for either termination of contract or penalty more than 10%.,, item note : 4 2000143080 220 40 10 replacement of wire rope size 36 mm dia 12,620 m email : bhavik.prajapati@amns.in contact : name : bhavik prajapati item details : replacement of wire rope dia. 34~36mm sr. no.,,descriptions,, 1,,tools & tackles shifting from designated area to crane lt rail in rs bay.,, 2,,safety tool box talk relates to the crane lt rail like cleaning, cutting, lifting & rigging, welding & dust dumping activities.,, 3,,new wire rope to be shifted from workshop to required location with hydra.,, 4,,auxiliary hoist to be lowered and slings to be fixed in 40t hook.,, 5,,auxiliary hoist along with slings to be positioned above main hoist spreader beam and clamp the slings on the spreader beam.,, 6,,hoist the 40t and take the load of the main hoist on auxiliary hoist. ensure main hoist is in no load.,, 7,,after taking load in 40t hoist, main hoist wire rope to be loosened till rope clamp is in proper position to be removed.,, 8,,wire rope thimble must be removed and thimble to be lowered manually with help of manila rope, lifting pulley, chain pulley block & hydra.,, 9,,drum end side rope to be cut and to be joined with new rope. measure the length of rope from pulley to new joint.,, 10,,thimble to be removed from the old rope and same rope to be pulled with hydra until whole old rope is out and to be cut from new joint.,, 11,,new thimble to be fixed (at measured distance in slide guide) and same to be lifted by tying it at one end of manila rope and at the same page 5 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details time pulling other end of manila rope with hydra,, 12,,connect the thimble with equalizer beam and locking must be done.,, 13,,rope drum clamps to be removed and rope to be lowered manually with help of manila rope, lifting pulley & hydra. ,, 14,,as per measurement (summation of drum end side rope & pulley to new wire rope joint) cut the new wire.,, 15,,rope drums side wire rope to be lifted up and clamped with rope drum. tightened the clamp bolts properly. ,, 16,,manila rope to be fixed on wire at specific distance so that it can be very easily removed from approachable space. ,, 17,,slowly hoist the main hoist until the wire rope is fully wound on drum ensuring main hoist is on load.,, 18,,if the equalizer beam is balanced, then unclamp the slings from the main hoist spreader beam and remove the slings from 40t hook.,, 19,,shift the removed wire rope to designated place with hydra.,, 20,,remove prepared scaffolding, if any. ensure no loose material lying on crane, walkway & working area.,, 21,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, 22,,adhere the standard maintenance practice (smp/sop) of respective crane assembly replacement,, ,, important note:,, ,, ,, ,, ,, ,, ,, ,, a.,,use all the ppe required at smp1 (frp helmet, frp jacket, safety shoe, safety goggles, safety hand gloves and nose mask). safety is vendor’s responsibility. amnsi will explain hazards in the job during tbt / hirac discussion. vendor has to monitor behaviour of associates periodically from hse point of view and ensure required correction. all the associate must have height pass. height pass will be issued by am/ns safety department. ,, ,, b.,,consumable + welding m/c + cutting set + tools + tackles + housekeeping will be in vendors scope.,, ,, c.,,above procedure demonstrated for 160/320t cranes and for 260 cranes procedure may change little bit.,, ,, d.,,use e 7018 welding electrodes for all the welding jobs.,, ,, ,, ,, e.,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, ,, f. ,,movement of manpower / associates at our hazira site. 1. no pedestrian/cycles/two wheelers movement will be allowed inside the plant premises. 2. vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. the movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. other terms: associate has to undergo medical fitness at our care nursing home, am/ns township, hazira. this would be done as per am/ns india standards and the cost shall be borne by the vendor. amns has its own secures access system called scrum at hazira site which is use for processing the gate pass.,, ,,g.,,penalty for non compliance: penalty will be recovered from the monthly payment if vendor is not able to achieve required service levels as mentioned below: if vendor will delay in job execution / equipment refurbishment as per plant requirement. job to be carried out anytime (24x7, 365days). if vendor does not deploy the required specified quantity & quality of manpower as per rfq or a person deployed is not reporting to the duty. while normal duty hours are 8 per day, more than 16 hours continuous page 6 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details duty is not allowed on any day. if safety violation during job execution. minimum 3% penalty will be applicable on a monthly bill value. penalty in two consecutive months will make contractor eligible for either termination of contract or penalty more than 10%.,, item note : 5 2000143080 230 50 10 replacement of wirerope size 26 & 28 mm 1,830 m email : bhavik.prajapati@amns.in contact : name : bhavik prajapati item details : replacement of wire rope dia. 26~28mm sr. no.,,descriptions,, 1,,tools & tackles shifting from designated area to crane lt rail in rs bay.,, 2,,safety tool box talk relates to the crane lt rail like cleaning, cutting, lifting & rigging, welding & dust dumping activities.,, 3,,new wire rope to be shifted from workshop to required location with hydra.,, 4,,auxiliary hoist to be lowered and ensure clamp bolts are upwards.,, 5,,rope drum clamps to be removed and rope to be lowered manually with help of manila rope.,, 6,,rope end to be joined with new rope. measure the length of rope from pulley to new joint.,, 7,,slowly weaving of new rope on drum ensuring with help of hydra.,, 8,,another drum end rope clamp removed and new rope end tobe lifted manually with help of manila rope.,, 9,,new rope clamping in rope drum.,, 10,,slowly hoist the aux hoist until the wire rope is fully wound on drum ensuring main hoist is on load.,, 11,,shift the removed wire rope to designated place with hydra.,, 12,,remove prepared scaffolding, if any. ensure no loose material lying on crane, walkway & working area.,, 13,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, 14,,adhere the standard maintenance practice (smp/sop) of respective crane assembly replacement,, ,, important note:,, ,, ,, ,, ,, ,, ,, ,, a.,,use all the ppe required at smp1 (frp helmet, frp jacket, safety shoe, safety goggles, safety hand gloves and nose mask). safety is vendor’s responsibility. amnsi will explain hazards in the job during tbt / hirac discussion. vendor has to monitor behaviour of associates periodically from hse point of view and ensure required correction. all the associate must have height pass. height pass will be issued by am/ns safety department. ,, ,, b.,,consumable + welding m/c + cutting set + tools + tackles + housekeeping will be in vendors scope.,, ,, c.,,above procedure demonstrated for 160/320t cranes and for 260 cranes procedure may change little bit.,, ,, d.,,use e 7018 welding electrodes for all the welding jobs.,, ,, ,, ,, e.,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, ,, f. ,,movement of manpower / associates at our hazira site. 1. no pedestrian/cycles/two wheelers movement will be allowed inside the plant premises. 2. vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. the movement of persons page 7 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details inside the plant by foot/bicycle/two wheelers is prohibited. other terms: associate has to undergo medical fitness at our care nursing home, am/ns township, hazira. this would be done as per am/ns india standards and the cost shall be borne by the vendor. amns has its own secures access system called scrum at hazira site which is use for processing the gate pass.,, ,,g.,,penalty for non compliance: penalty will be recovered from the monthly payment if vendor is not able to achieve required service levels as mentioned below: if vendor will delay in job execution / equipment refurbishment as per plant requirement. job to be carried out anytime (24x7, 365days). if vendor does not deploy the required specified quantity & quality of manpower as per rfq or a person deployed is not reporting to the duty. while normal duty hours are 8 per day, more than 16 hours continuous duty is not allowed on any day. if safety violation during job execution. minimum 3% penalty will be applicable on a monthly bill value. penalty in two consecutive months will make contractor eligible for either termination of contract or penalty more than 10%.,, item note : 6 2000143080 240 60 10 replacement of wire rope size 22 mm & 1,852 m email : bhavik.prajapati@amns.in contact : name : bhavik prajapati item details : replacement of wire rope dia. 22mm sr. no.,,descriptions,, 1,,wire rope and stand to be shifted from workshop to required location with hydra.,, 2,,hoist to be lowered.,, 3,,rope drum clamps at one end to be removed and rope to be lowered manually with help of manila rope, lifting pulley & hydra. also take measurement of rope,, 4,,rope drum clamps at other end to be removed and rope to be lowered manually with the help of manila rope, lifting pulley & hydra.,, 5,,new wire rope to be welded at one end of old wire rope and other end is tied with hydra. then rope reweaving is done.,, 6,,measure the length of the rope and then cut the old wire rope with the help of cutting set.,, 7,,the new wire rope to be of required length as the previous wire rope. ,, 8,,new wire rope is lifted at one end to the rope drum manually with the help of manila rope, lifting pulley & hydra. clamp the wire rope to the rope drum.,, 9,,new wire rope is lifted at another end to the rope drum manually with the help of manila rope, lifting pulley & hydra. clamp the wire rope to the rope drum.,, 10,,slowly hoist the main hoist till wire rope is tightened.,, 11,,ensure no loose materials/tools & tackles are left on crane after job completion.,, 12,,carry out the load test and release the crane for regular operation. ,, 13,,old wire rope must be rolled and sent to scrap.,, ,, ,, ,, ,, ,, important note:,, ,, ,, ,, ,, ,, ,, ,, ,, a.,,use all the ppe required at smp1 (frp helmet, frp jacket, safety shoe, safety goggles, safety hand gloves and nose mask). safety is vendor’s responsibility. amnsi will explain hazards in the job during tbt / hirac discussion. vendor has to monitor behaviour of associates periodically from hse point of view and ensure required correction. all the associate must have height pass. height pass will be issued by am/ns safety department. ,, ,, b.,,consumable + welding m/c + cutting set + tools + tackles + page 8 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details housekeeping will be in vendors scope.,, ,, c.,,above procedure demonstrated for 160/320t cranes and for 260 cranes procedure may change little bit.,, ,, d.,,use e 7018 welding electrodes for all the welding jobs.,, ,, ,, ,, ,, e.,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, ,, f. ,,movement of manpower / associates at our hazira site. 1. no pedestrian/cycles/two wheelers movement will be allowed inside the plant premises. 2. vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. the movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. other terms: associate has to undergo medical fitness at our care nursing home, am/ns township, hazira. this would be done as per am/ns india standards and the cost shall be borne by the vendor. amns has its own secures access system called scrum at hazira site which is use for processing the gate pass.,, ,,g.,,penalty for non compliance: penalty will be recovered from the monthly payment if vendor is not able to achieve required service levels as mentioned below: if vendor will delay in job execution / equipment refurbishment as per plant requirement. job to be carried out anytime (24x7, 365days). if vendor does not deploy the required specified quantity & quality of manpower as per rfq or a person deployed is not reporting to the duty. while normal duty hours are 8 per day, more than 16 hours continuous duty is not allowed on any day. if safety violation during job execution. minimum 3% penalty will be applicable on a monthly bill value. penalty in two consecutive months will make contractor eligible for either termination of contract or penalty more than 10%.,, item note : 7 2000143080 250 70 10 replacement of wire rope size 20 mm dia 610 m email : bhavik.prajapati@amns.in contact : name : bhavik prajapati item details : replacement of wire rope dia. 18~20mm sr. no.,,descriptions,, 1,,wire rope and stand to be shifted from workshop to required location with hydra.,, 2,,hoist to be lowered.,, 3,,rope drum clamps at one end to be removed and rope to be lowered manually with help of manila rope, lifting pulley & hydra. also take measurement of rope,, 4,,rope drum clamps at other end to be removed and rope to be lowered manually with the help of manila rope, lifting pulley & hydra.,, 5,,new wire rope to be welded at one end of old wire rope and other end is tied with hydra. then rope reweaving is done.,, 6,,measure the length of the rope and then cut the old wire rope with the help of cutting set.,, 7,,the new wire rope to be of required length as the previous wire rope. ,, 8,,new wire rope is lifted at one end to the rope drum manually with the help of manila rope, lifting pulley & hydra. clamp the wire rope to the rope drum.,, 9,,new wire rope is lifted at another end to the rope drum manually with the help of manila rope, lifting pulley & hydra. clamp the wire rope to the rope drum.,, 10,,slowly hoist the main hoist till wire rope is tightened.,, page 9 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 11,,ensure no loose materials/tools & tackles are left on crane after job completion.,, 12,,carry out the load test and release the crane for regular operation. ,, 13,,old wire rope must be rolled and sent to scrap.,, ,, important note:,, ,, ,, ,, ,, ,, ,, ,, a.,,use all the ppe required at smp1 (frp helmet, frp jacket, safety shoe, safety goggles, safety hand gloves and nose mask). safety is vendor’s responsibility. amnsi will explain hazards in the job during tbt / hirac discussion. vendor has to monitor behaviour of associates periodically from hse point of view and ensure required correction. all the associate must have height pass. height pass will be issued by am/ns safety department. ,, ,, b.,,consumable + welding m/c + cutting set + tools + tackles + housekeeping will be in vendors scope.,, ,, c.,,above procedure demonstrated for 160/320t cranes and for 260 cranes procedure may change little bit.,, ,, d.,,use e 7018 welding electrodes for all the welding jobs.,, ,, ,, ,, e.,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, ,, f. ,,movement of manpower / associates at our hazira site. 1. no pedestrian/cycles/two wheelers movement will be allowed inside the plant premises. 2. vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. the movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. other terms: associate has to undergo medical fitness at our care nursing home, am/ns township, hazira. this would be done as per am/ns india standards and the cost shall be borne by the vendor. amns has its own secures access system called scrum at hazira site which is use for processing the gate pass.,, ,,g.,,penalty for non compliance: penalty will be recovered from the monthly payment if vendor is not able to achieve required service levels as mentioned below: if vendor will delay in job execution / equipment refurbishment as per plant requirement. job to be carried out anytime (24x7, 365days). if vendor does not deploy the required specified quantity & quality of manpower as per rfq or a person deployed is not reporting to the duty. while normal duty hours are 8 per day, more than 16 hours continuous duty is not allowed on any day. if safety violation during job execution. minimum 3% penalty will be applicable on a monthly bill value. penalty in two consecutive months will make contractor eligible for either termination of contract or penalty more than 10%.,, item note : 8 2000143080 260 80 10 replacement of wire rope size 32 mm dia 520 m email : bhavik.prajapati@amns.in contact : name : bhavik prajapati item details : replacement of wire rope dia. 32mm sr. no.,,descriptions,, 1,,wire rope and stand to be shifted from workshop to required location with hydra.,, 2,,hoist to be lowered.,, 3,,rope drum clamps at one end to be removed and rope to be lowered page 10 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details manually with help of manila rope, lifting pulley & hydra. also take measurement of rope,, 4,,rope drum clamps at other end to be removed and rope to be lowered manually with the help of manila rope, lifting pulley & hydra.,, 5,,new wire rope to be welded at one end of old wire rope and other end is tied with hydra. then rope reweaving is done.,, 6,,measure the length of the rope and then cut the old wire rope with the help of cutting set.,, 7,,the new wire rope to be of required length as the previous wire rope. ,, 8,,new wire rope is lifted at one end to the rope drum manually with the help of manila rope, lifting pulley & hydra. clamp the wire rope to the rope drum.,, 9,,new wire rope is lifted at another end to the rope drum manually with the help of manila rope, lifting pulley & hydra. clamp the wire rope to the rope drum.,, 10,,slowly hoist the main hoist till wire rope is tightened.,, 11,,ensure no loose materials/tools & tackles are left on crane after job completion.,, 12,,carry out the load test and release the crane for regular operation. ,, 13,,old wire rope must be rolled and sent to scrap.,, ,, important note:,, ,, ,, ,, ,, ,, ,, ,, a.,,use all the ppe required at smp1 (frp helmet, frp jacket, safety shoe, safety goggles, safety hand gloves and nose mask). safety is vendor’s responsibility. amnsi will explain hazards in the job during tbt / hirac discussion. vendor has to monitor behaviour of associates periodically from hse point of view and ensure required correction. all the associate must have height pass. height pass will be issued by am/ns safety department. ,, ,, b.,,consumable + welding m/c + cutting set + tools + tackles + housekeeping will be in vendors scope.,, ,, c.,,use e 7018 welding electrodes for all the welding jobs.,, ,, ,, ,, d.,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, ,, f. ,,movement of manpower / associates at our hazira site. 1. no pedestrian/cycles/two wheelers movement will be allowed inside the plant premises. 2. vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. the movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. other terms: associate has to undergo medical fitness at our care nursing home, am/ns township, hazira. this would be done as per am/ns india standards and the cost shall be borne by the vendor. amns has its own secures access system called scrum at hazira site which is use for processing the gate pass.,, ,, g.,,penalty for non compliance: penalty will be recovered from the monthly payment if vendor is not able to achieve required service levels as mentioned below: if vendor will delay in job execution / equipment refurbishment as per plant requirement. job to be carried out anytime (24x7, 365days). if vendor does not deploy the required specified quantity & quality of manpower as per rfq or a person deployed is not reporting to the duty. while normal duty hours are 8 per day, more than 16 hours continuous duty is not allowed on any day. if safety violation during job execution. page 11 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details minimum 3% penalty will be applicable on a monthly bill value. penalty in two consecutive months will make contractor eligible for either termination of contract or penalty more than 10%.,, item note : 9 2000143080 270 90 10 rail bolt tightening (cr 120 + cr 100 2,000 no email : bhavik.prajapati@amns.in contact : name : bhavik prajapati item details : rail bolt tightening sr. no.,,descriptions,, 1,,tools & tackles shifting from designated area to crane lt rail in rs bay.,, 2,,safety tool box talk relates to the crane lt rail like cleaning, cutting, rigging, welding & dust dumping activities.,, 3,,cleaning & bolt tightening of crane lt rail: note: crane movement may not be restricted as furnace will continue to run. dust may not be allowed to dump at zero level.,, 4,,remove prepared scaffolding, if any. ensure no loose material lying on crane, walkway & working area.,, 5,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion. ,, 6,,adhere the standard maintenance practice (smp/sop) of respective crane assembly replacement,, ,, important note:,, ,, ,, ,, ,, ,, ,, ,, a.,,use all the ppe required at smp1 (frp helmet, frp jacket, safety shoe, safety goggles, safety hand gloves and nose mask). safety is vendor’s responsibility. amnsi will explain hazards in the job during tbt / hirac discussion. vendor has to monitor behaviour of associates periodically from hse point of view and ensure required correction. all the associate must have height pass. height pass will be issued by am/ns safety department. ,, b.,,consumable + welding m/c + cutting set + tools + tackles + housekeeping will be in vendors scope.,, c.,,use e 7018 welding electrodes for all the welding jobs.,, ,, ,, ,, d.,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, ,, e. ,,movement of manpower / associates at our hazira site. 1. no pedestrian/cycles/two wheelers movement will be allowed inside the plant premises. 2. vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. the movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. other terms: associate has to undergo medical fitness at our care nursing home, am/ns township, hazira. this would be done as per am/ns india standards and the cost shall be borne by the vendor. amns has its own secures access system called scrum at hazira site which is use for processing the gate pass.,, ,, f.,,penalty for non compliance: penalty will be recovered from the monthly payment if vendor is not able to achieve required service levels as mentioned below: if vendor will delay in job execution / equipment refurbishment as per plant requirement. job to be carried out anytime (24x7, 365days). if vendor does not deploy the required specified quantity & quality of manpower as per rfq or a person deployed is not reporting to the duty. page 12 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details while normal duty hours are 8 per day, more than 16 hours continuous duty is not allowed on any day. if safety violation during job execution. minimum 3% penalty will be applicable on a monthly bill value. penalty in two consecutive months will make contractor eligible for either termination of contract or penalty more than 10%.,, item note : 10 2000143080 280 100 10 replacement of rails 740 m email : bhavik.prajapati@amns.in contact : name : bhavik prajapati item details : replacement of rail (crane,ltc,stc) sr. no.,,descriptions,, 1,,tools & tackles shifting from designated area to crane lt rail in rs bay.,, 2,,safety tool box talk relates to the crane lt rail like cleaning, cutting, lifting & rigging, rail changing, welding & dust dumping activities.,, 3,,cr120 rail to be shifted from workshop to required location with hydra.,, 4,,new rail to be shifted from 0 level to crane level with service hoist ,, 5,,new rail to be shifted with help of manpower to exact location where the old rail has to be removed.,, 6,,provide the mechanical stopper on lt rail to prevent the further movement of crane while work under progress.,, 7,,ensure the dsl is kept isolated. remove the rail clamps on both sides.,, 8,,remove the fish plate on both sides of the joints and ensure freeness of the rail. ,, 9,,shift the old rail aside and take the new rail in position with the help of manpower.,, 10,,check the alignment of the rail and joint. if required, glozing must be done on end to match the joint.,, 11,,provide the rail clamp and tighten the clamp bolts.,, 12,,provide the fish plate in joint and tighten the fish plate bolts.,, 13,,shift the old rail to designated place with hafa service hoist & hydra.,, 14,,remove prepared scaffolding, if any. ensure no loose material lying on crane, walkway & working area.,, 15,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, 16,,adhere the standard maintenance practice (smp/sop) of respective crane assembly replacement,, ,, important note:,, ,, ,, ,, ,, ,, ,, ,, a.,,use all the ppe required at smp1 (frp helmet, frp jacket, safety shoe, safety goggles, safety hand gloves and nose mask). safety is vendor’s responsibility. amnsi will explain hazards in the job during tbt / hirac discussion. vendor has to monitor behaviour of associates periodically from hse point of view and ensure required correction. all the associate must have height pass. height pass will be issued by am/ns safety department. ,, b.,,consumable + welding m/c + cutting set + tools + tackles + housekeeping will be in vendors scope.,, ,, c.,,above procedure demonstrated for 160/320t cranes lt rails and for 260 cranes & ltc rail change procedure may differ.,, d.,,use e 7018 welding electrodes for all the welding jobs.,, ,, ,, ,, d.,,shift the removed equipment / scrap to designated repair area / scrap area. ensure proper housekeeping near working area after job completion.,, ,, e. ,,movement of manpower / associates at our hazira site. page 13 of 13 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000113902 date 01.06.2024 submission date 09.06.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. dandaveni shashi kumar contact email dandaveni.shashikumar@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 1. no pedestrian/cycles/two wheelers movement will be allowed inside the plant premises. 2. vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. the movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. other terms: associate has to undergo medical fitness at our care nursing home, am/ns township, hazira. this would be done as per am/ns india standards and the cost shall be borne by the vendor. amns has its own secures access system called scrum at hazira site which is use for processing the gate pass.,, ,, f.,,penalty for non compliance: penalty will be recovered from the monthly payment if vendor is not able to achieve required service levels as mentioned below: if vendor will delay in job execution / equipment refurbishment as per plant requirement. job to be carried out anytime (24x7, 365days). if vendor does not deploy the required specified quantity & quality of manpower as per rfq or a person deployed is not reporting to the duty. while normal duty hours are 8 per day, more than 16 hours continuous duty is not allowed on any day. if safety violation during job execution. minimum 3% penalty will be applicable on a monthly bill value. penalty in two consecutive months will make contractor eligible for either termination of contr...
Tender Value : ₹ Ref. Documents
