Purchase Mechanical Tools Equipment And Machinery 1. Scriber 150 Mm Length Scriber (Knurled Centre Position)Spring Made Of High Carbon Steel And Point Hardened & Temp 2. Centre Punch 10 Mm And Length - 120 Mm Made Out Of High Grade Chrome Steel Accurately Machined And Heat Treated. €¢ Deep Knurling On The Body Ensures Firm Grip. €¢ It Has Black Phosphate Finish Generally Conforming To Is 7177-1999 3. Screw Driver 150Mm Insulated Flat Type Made Out Of High Grade Steel And Transparent Green Cellulose Acetate Handle. The Handle Is Made From High Grade C. A. Plastic Which Is Non Flammable And Unaffected By Oil Petrol, Grease, Water Etc. €¢ It Is Available In Wide Variety Of Different Tip Size & Length. €¢ It Is Generally Conforming To Is 844-1979 4. Chisel Cold Flat 20 Mm X 150 Mm High Carbon Steel Made From High Grade Steel,Forged And Ground.€¢ Differential Heat Treatment For Cutting Edge,And Striking End,Ensure Long Life. €¢ Bright,Blue,Painted Finish. €¢ Generally Conforming To Is 5663-1970 5. File Flat - Second Cut 250 Mm Is 1931:2000, From High Qulity Alloy Steel,Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 6. File Flat Smooth 250 Mm. Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 7. File Half Round Second Cut 150 Mm. Is 1931:2000, From High Qulity Alloy Steel,Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 8. Hacksaw Frame Fixed Type Tubular / Pistol Grip For - 12 / -30 Cm Blade Tubular & Pistol Grip For To 30 Cm Blade, Is: 5169 Heavy Guage Pipe Plastic Handle 9. Safety Goggles. General Purpose Wrap Around Frame Clear Lens Clear Coated Uv Protection 10. Dot Punch 100 Mm Made Out Of High Grade Chrome Steel Accurately Machined And Heat Treated. €¢ Deep Knurling On The Body Ensures Firm Grip. €¢ It Has Black Phosphate Finish Generally Conforming To Is 7177-1999 11. Steel Rule Graduated Both In Metric And English Unit 300 Mm Stainless Steel Front Side: Top Edge 1/2 Mm, Mm. Bottom Edge 1/16Ths, 1/32Nds, Reverse Side: Conversion Table Inches To Mm 12. Straight Edge Steel 300 Mm Material: High Quality Steel 13. Spirit Level Metal Type - 2 300 Mm Basic Length Accuracy 0.1Mm/Meter Plastic/Aluminium Body 14. Vernier Caliper 150 Mm L.C. 0.02 Mm. Measuring Range (Mm) 0-150 Mm Resolution (Mm) 0.02 Mm Measuring Range (Inch) 0-6 Inch Resolution (Inch) 0.001 Inch Accuracy 0.03 Mm Overall Length (Mm) 229 Mm Lower Jaw Length (Mm) 40 Mm Upper Jaw Length(Mm) 21 Mm Material Stainless Steel 15. Vernier Height Gauges 0 - 300 Mm With Least Count = 0.02 Mm Zero Reference Point Can Be Adjusted. Stain Chrome Finished Scales For Glare-Free Reading. Extra-Large Base For Rigidity. Optional Magnifier For Easier Reading Carbide-Tipped Scriber Is Provided Range (Mm) 0-300 Mm Resolution (Mm) 0.02 Mm Accuracy In Mm ±0.04 Mm Length (Mm) 525 Mmmaterial Stainless Steel Weight (Kg) 3.1 Kgincludes Product Catalog ,Including Scriber, Scriber Clamp 16. Vernier Bevel Protractor Blade With Acute Angle Attachment 300 Mm Resolution 0.083° Scale / Blade Length 12 Inch Material Stainless Steel 17. Wire Gauge, Metric Standard. Used For Measuring Wires From 0 To 36 Gauge It Is Made Of Heavy Gauge, Hardened And Tempered Tool Steel And Is Chrome Finished Comes With A Chart Of Decimal Equivalents Of Each Size It Measures Approximately 3 3/4 (165 Mm) In Diameter 18. Universal Scribing Block. 220 Mm/300 Mm The Base Should Made From Case Hardened Steel, Ground On Bottom And At One End. The Fine Adjustment Feature Makes It Possible To Obtain Quick And Accurate Settings. Adjustment Should Made By A Knurled Thumbscrew, Which Is Located At The End Of The Rocker. The Rocker Runs The 2/3 The Length Of The Base And Pivots Against A Stiff Spring Located At The Rear End Of The Base. 19. V-Block Pair With Clamps 150 X 100 X 100 Mm, Hardened & Ground ,High Accuracy.Is:2949-1964 20. Angle Plate 150 X 150 X 250 Mm Made From Close Grained Plain Cast Iron Conforming To Grade Fg 220 Of Is 210 21. Portable Hand Drill (Electric) 0 To 13 Mm Capacity With Chuck ,Arbor,Chuck Key & Cable, Sutable For Electrical Supply Of 230 V A.C. Single -Phase ,50 Hz., Copper Winding 22. Drill Twist Straight Shank 3 Mm To 12 Mm By 0.5 Mm H.S.S. For Genral Purpose Application On Steel, Cast Steel, Alloyed And Non Alloyed, Grey Cast Iron, German Silver Steel, Graphite Etc. Material Hss(M2), Confirming To Is: 5101/Din 338/Bs:328/Iso 23. Drill Twist Taper Shank 8 Mm To 20 Mm By 0.5 Mm H.S.S. For Genral Purpose Application On Steel, Cast Steel, Alloyed And Non Alloyed, Grey Cast Iron, German Silver Steel, Graphite Etc. Material Hss(M2), Confirming To Is: 5101/Din 338/Bs: 328/Iso 24. Taps And Dies Complete Set In Box. Whitworth 6175-1992,Complete Set In Box , Hcs Material, Coarse Pitch 25. Taps And Dies Complete Set 5, 6, 8, 10 & 12Mm Set Of 5 6175-1992,Complete Set In Box , Hcs Material, Coarse Pitch 26. File Feather Edge Smooth 150 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 27. File Triangular Smooth 200 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 28. File Round Second Cut 200 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 29. File Square Second Cut 250 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 30. Feeler Gauge Gauge Feeler / Thickness - 0.05 Mm To 0.3 Mm By 0.05 And 0.4 Mm To 1 Mm By 0.1 Mm - 13 Leaves 31. File Triangular Second Cut. 200 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 32. File Flat Second Cut Safe Edge. 300 Mm Is 1931:2000, From High Qulity Alloy Steel,Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 33. File Flat Bastard 200 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 34. File Flat Bastard. 300 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 35. File Swiss Type Needle Set Of 12, Length = 150 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity 36. File Half Round Second Cut. 250 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 37. File Half Round Bastard. 250 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 38. File Round Bastard. 250 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 39. File Hand Second Cut. 150 Mm Is 1931:2000, From High Qulity Alloy Steel, Long Life , Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 40. File Card. 3X5 Size, Brass Or Steel Wire 41. Pliers Combination Insulated 150 Mm Is 6149-1984 Grade Ii The Pliers Made From High Grade Steel, Forged And Differentially Heat Treated To Give Best Performance. Fully Insulated With Quality Plastic Material Sleeves Ensures Safe Electrical Working. Should Have Excellent Wire Cutting Ability For Soft And Hard Wires. Available With Fully Polished Head Or Black Phosphated And Bright Polished Head 42. Blow Lamp Blow Lamp 0.50 Liters. Brass Material Capacity 500 Ml 43. Spanner- Double Ended 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22generally Conforming To Is 2028-2004 Should Be Made From High Grade Steel,Forged And Accurately Machined.Hardened And Tempered To Give Long Trouble Free Service. Provide With Appropriate Surface Protection For Rust Prevention 44. Spanner Adjustable 150 Mm Selected Carbon Steel, Black Phosphat Finish. Generally Confirming To Is 6149-1984 45. Interchangeable Ratchet Socket Set 12 Mm Driver, Sized10-32 Mm Set Of 18 Socket & Attachments.Sized 10-32 Mm Set Of 18 Socket & Attachments. Generally Conforming To Is 7381-1986 It Is Made From High Grade Steel,Forged And Accurately Machined. Hardened And Tempered To Give Long Trouble Free Service. Provide With Appropriate Surface Protection For Rust Prevention 46. Double Ended Tubular Box Spanner Set With Tommy Bar. 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22tommy Bar 1- Dia 12 X 250Mm : 2- Special Tommy Bar 47. Clamp Toolmaker 5 Cm And 7.5 Cm Set Of 2. The Tool Makers Parallel Clamp Is A Low Reach Heavy Duty Clamping Device Which Is Stronger And Smaller Than A C Clamp Or A G Clamp. In General The Screw Threads, Toggles Or Nuts Are Turned To Tighten The Jaws Grip, Ensuring A Tight Fit And Constant Pressure While The Piece Is Worked On. 48. Hand Reamer Set (Taper Pin Straight Flute) Nominal Dia. 6, 8, 10, 12, 16Mm Reamer Should Be Made From Superior Quality Raw Materials. - Adjustable By Tightening Nuts 49. Machine Reamer Parallel (Helical Flute) 12 - 16Mm Set Of 5. Confirming To Is 5444-1978 Features: A Reamer Having Virtually Parallel Cutting Edges, With Taper & Bevel Lead Integral With A Parallel Shank Of The Nominal Diameter Of The Cutting Edges, And With A Driving Square On The End Of The Shank. 50. Scraper Flat 150 Mm Hardened To Give A Solid Impression. Shiny Black Oxidized Finish Wooden Handle Is;8646-1964,Hcs Mater 51. Scraper Triangular 150 Mm Hardened To Give A Solid Impression. Shiny Black Oxidized Finish Wooden Handle Is;8646-1964,Hcs Mater 52. Scraper Half Round 150 Mm Hardened To Give A Solid Impression. Shiny Black Oxidized Finish Wooden Handle Is;8646-1964,Hcs Mater 53. Chisel Cold Crosscut & Diamond Point. 9 Mm X 150 Mm Made From High Grade Steel, Forged And Ground.€¢ Differential Heat Treatment For Cutting Edge,And Striking End,Ensure Long Life. €¢ Bright,Blue,Painted Finish €¢ Generally Conforming To Is 5663-1970 54. Chisel Cold Flat 9 Mm X 100 Mm Made From High Grade Steel,Forged And Ground. €¢ Differential Heat Treatment For Cutting Edge,And Striking End,Ensure Long Life. €¢ Bright,Blue,Painted Finish. €¢ Generally Conforming To Is 5663-1970 55. Chisel Cold Round Nose 9 Mm X 100 Mm Made From High Grade Steel,Forged And Ground.€¢ Differential Heat Treatment For Cutting Edge,And Striking End,Ensure Long Life. €¢ Bright,Blue,Painted Finish. €¢ Generally Conforming To Is 5663-1970 56. Drill Chuck With Key 12 Mm. Chuck Capacity : 1.5 To 13 Mm Drill Chuck;Type: Keyed Chucks 57. Pipe Wrench 400 Mm Selected Carbon Steel, Polished, Handles Red Japanned. Is : 4003 (Part 1)1978/95 58. Pipe Vice 100 Mm Body Material Steel, Jaw Material Steel 59. Machine Vice - Swivel Base Milling Machine Vise With Swivel Base 100 Mm Body : Sg Iron Body Features : Plain Size (Mm) : 100 Swivel Is Full 360° 60. Machine Vice - Swivel Base Milling Machine Vise With Swivel Base 100 Mm Body : Sg Iron Body Features : Plain Size (Mm) : 100 Swivel Is Full 360° 61. Sleeve Drill Morse No. 0 - 1, 1 - 2, 2 - 3, 3 - 4, 4 - 5, Is.2608..1961 Hcs Materials 62. Vice Bench 150 Mm Corrosion Resistance, Impeccable Quality, Fine Finish Stressed Parts Beefed- Up ! Areas Of Greatest Stress Have Been Strengthened With Shock Resisting C.I. Casting For Long Dependable Service. The Large Diameter Main Screw Fine Pitched, Square Thread Made Of High Grade Steel. Long Forged Steel: Detachable And Replaceable Nut. Replaceable Hardened Steel Serrated Jaw Plates Guarantee A Fast Non-Slip Grip. 63. Machine Vice. 100Mm Cast Iron Machining Body Both Griping Jaw Steel ,Is:4502-1999 64. Torque Wrench (Standard/Ratchet Type) 14 To 68 Nm, Standard Type Comfortable Grip : The Synthetic Handle Is Manufactured By Specially Selected Resin Which Provides Comfort And Durability And Resists Chemicals In Automotive And Industrial Usage. Light Weight : Up To 50% Lighter Than The Traditional Click Type Torque Wrench. Reduces User Fatigue. Ideal For Overhead Applications. Accuracy : ± 3% Of Reading Exceeds All International Standards Including Iso-6789:2003. Calibration Certificate With National Traceability Is Provided With Every Torque Wrench. 65. Power Tools For Fastening Capacity 10-18Mm Torque, Max(Hard Screw Driving Applications) 30 Nm Torque, Max(Soft Screw Driving Applications) 14 Nm No-Load Speed (1St Gear/2Nd Gear) 0 - 400 Or 1500 Rpm Battery Voltage 12 V, High Performance: +20% Soft Torque Improvements Keyless Chuck 10 Mm Battery Capacity: 2.0 Ah 66. Different Profile Gauges (Plate Type) - For Demonstration Metric Standard 67. Indexable Boring Bar With Inserts 1 Shank 68. Temperature Gauge Range 0 - 150°C Material: Stainless Steel Dial Size: 100 Mm 69. Lapping Plate Dia. -6 Cast Iron Round Type 70. Drill Gauges Letter Drill Gauge (A To Z), Number Drill Gauge (1 To 60), Metric Drill Gauge (1.5Mm To 12.5Mm, 30 Holes) 71. Cast Iron Globe Valve (Flanged Type) 150Nb, Class# 150 Flange: Ansi125-B16.1 Material Cast Iron 72. C.I. Sluice / Gate Valve (Flanged Type) 150Nb, Class# 150 Flange: Ansi125-B16.1 Material Cast Iron 73. Hollow Punch Straight Shank Hollow Punch Sets 5-12Mm (Manufactured From Hardened Carbon Steel. Through Body Ejection Of The Punched Material Makes Them Ideal For Punching Clean Edged Holes In Leather, Wood, Plastics, Card And Paper. 74. Bearing Extractor Universal Gear Puller 3 Jaws Adjustable Length 300 Mm Drop Forged Legs Are Reversible For Internal Or External Pulling. High Carbon Steel Reversible Legs And Body Hex Head Forcing Screws For Use With Ratchet Or Spanner Heavy Duty,Great For Removing Wheel Bearings, Hubs, Gear Pulleys.Three Claws Linkage, Automatically Centering Locating, Easy To Use. It Is Made Of High-Strength Alloy Steel To Be Durable 75. Pulley Extractor No. Of Jaws: Three Leg Jaw Spread: 6 Inch Material: Drop Forged Steel Equipment Weight: 0.46 Kg 76. Prick Punch 100 Mm Knurled Body ,High Carbon Steel,Hardened & Tempered 30º Is 7177 1974 77. Planishing Hammer. Is : 841 - 1983 78. Snip Bent Left Cut 250 Mm Hcs Material ,Hardened And Tempered Blads .Is 5658:1990 79. Digital Vernier Caliper. 0 - 150 Mm With Least Count 0.02Mm Four-Way Measurement Capability For Multiple Applications: Outside Diameter (Od), Inside Diameter (Id), Depth, And Step Digital, Single-Value Readout Lcd Display In Metric Units For Readability Position Memory For Retaining Measurements Function Control Buttons On The Face, For Ease Of Use: Origin, On/Off, And Zero/Abs (Absolute Scale) 80. Digital Vernier Caliper 0 - 200 Mm L.C. 0.01 Mm (Optional) Four-Way Measurement Capability For Multiple Applications: Outside Diameter (Od), Inside Diameter (Id), Depth, And Step Digital, Single-Value Readout Lcd Display In Metric Units For Readability Position Memory For Retaining Measurements Function Control Buttons On The Face, For Ease Of Use: Origin, On/Off, And Zero/Abs (Absolute Scale) 81. Carbide Wear Block. 1 Mm - 2 Mm Carbide Material In Plastic Box 82. Ss And Sc Centre Lathe (All Geared) With Minimum Specification Centre Height 150 Mm And Centre Distance 1000 Mm Along With 3 & 4 Jaw Chucks, Auto Feed System, Safety Guard, Taper Turning Attachment, Motorized Coolant System, Lighting Arrangement & Standard Accessories. 83. Oxy - Acetylene Gas Welding Set Equipment With Hoses, Oxygen & Acetylene Cylinders, Regulator And Other Accessories. 1) Two Stage Oxygen Regulator Conforming To Is6901-1981 ( Max. Outlet Pr 2 Kg/Cm2) 2) Two Stage Acetylene Regulator Conforming To Is6901-1981 (Max. Pr 1 Kg/Cm2) 2) High Pressure Seamless Filled Cylinder For Oxygen Gas, Water Capacity 40/47 Liters (Gas Capacity 6/7 Cm), Fitted With Valve As Per Is-3224 And Protection Cap. 4) Filled Dissolved Acetylene Gas Cylinder, Water Capacity 40/41 Liters (Gas Capacity)( 6/6 23 Cum),Fittedwith Valve As Per Is-3224 And Protection Cap.Standard Accessories 2 X 5 Mm Length 7 Mm Bore Hose, Four Hose Clips,One Pair Welders Goggle, One Pair Cylinder Outfit Spindle Keys, Spark Lighter, Leather Appron, Wire Brush Etc. 84. Welding Helmet With Coloured Flame Retardant Glass This Is Made With Injection-Moulded High Flexible Polypropylene Material. Thus, It Is Corrosion Resistant This Is Very Sturdy And Light Weight Along With Adjustable Ratchet Head Gear. Standard Vision 110 Mm X 85Mm Available In Black Colour Only. 85. Compressor Unit Suitable For Pressure: 8 Bar, Delivery: 50 Lpm (Or More), Reservoir Capacity: 24 Litres (Or More), 230V, 50 Hz, With Pressure Regulator And Water Separator 86. I. Single Acting Cylinder Max. Stroke Length 50 Mm, Bore Dia. 20 Mm 87. Ii. Double Acting Cylinder Max. Stroke Length 100 Mm, Bore Dia 20 Mm, Magnetic Type 88. Iii. 3/2-Way Valve Manually-Actuated, Normally Closed 89. Iv. 3/2-Way Valve Pneumatically-Actuated, Spring Return 90. V. One-Way Flow Control Valve 91. Vi. 5/2-Way Valve With Manually-Operated Switch 92. Vii. 5/2-Way Valve Pneumatically-Actuated, Spring Return 93. Viii. 5/2-Way Pneumatic Actuated Valve Double Pilot 94. Ix. 3/2-Way Roller Lever Valve Direct Actuation Normally Closed 95. X. Shuttle Valve (Or) 96. Xi. Two-Pressure Valve (And) 97. Xii. Pressure Gauge 0-16 Bar 98. Xiii. Manifold With Self-Closing Nrv, 6-Way 99. Xiv. Pushbutton Station For Electrical Signal Input With 3 Illuminated Momentary-Contact Switches (1 No + 1 Nc) And 1 Illuminated Maintained- Contact Switch (1 No + 1 Nc), Contact Load 2A 100. Xv. Relay Station With3 Relays Each With 4 Contact Sets(3No+1Nc Or Change-Over Type),5 A 101. Xvi. 3/2-Way Single Solenoid Valve With Led 102. Xvii. 5/2-Way Single Solenoid Valve With Manual Override And Led 103. Xviii. 5/2-Way Double Solenoid Valve With Manual Override And Led 104. Xix. Power Supply Unit, Input Voltage 85 €“ 265 V Ac, Output Voltage: 24 V Dc, Output Current: Max. 4.5 A, Short-Circuit-Proof. 105. Xx. Profile Plate, Anodised Aluminium 1100X700 Mm, With Carriers, Mounting Frames And Mounting Accessories (To Be Fitted Onto The Pneumatic Workstation) L470mmxw495mmxh825m M And (3) Drawer Slide Height (Approx.) 85Mm. 106. Cut Section Model For Pneumatic Components Cut Section Model For Pneumatic Components (Set Of 5 Items) 107. I. Hydraulic Power Pack With (1) External Gear Pump Having A Delivery Rate Of 2.5 Lpm, (Approx.) @ 1400 Rpm Operating Pressure 60 Bar, Coupled To A Single-Phase Ac Motor (230 V Ac) Having Start Capacitor And On/Off Switch And Overload Protection, (2) Pressure Relief Valve Adjustable From 0 €“ 60 Bar, (3) Oil Reservoir, =5 Litres Capacity Having Sight Glass, Drain Screw, Air Filter, And P And T Ports. 108. Ii. Pressure Relief Valve Pilot-Operated 109. Iii. Drip Tray, Steel Size 1160 Mm X 760 Mm. 110. Iv. Pressure Gauge Glycerin-Damped, Indication Range Of: 0 €“ 100 Bars 111. V. Four-Way Distributor With Five Ports, Equipped With A Pressure Gauge 112. Vi. Double Acting Hydraulic Cylinder With A Control Cam, Piston Diameter16 Mm, Piston Rod Diameter10 Mm, Stroke Length 200 Mm. 113. Vii. Suitable Weight For Vertical Loading Of Hydraulic Cylinder 114. Viii. Mounting Kit For Weight For Realizing Pulling And Pushing Load. 115. Ix. 3/2-Way Directional Control Valve With Hand Lever Actuation. 116. X. 4/2-Way Directional Control Valve With Hand Lever Actuation. 117. Xi. 4/3-Way Directional Control Valve Closed-Centre Position, With Hand Lever Actuation. 118. Xii. Non-Return Valve. 119. Xiii. Pilot-Operated Check Valve Pilotto Open. 120. Xiv. One-Way Flow Control Valve Withintegrated Check Valve. 121. Xv. T-Connector With Self-Sealing Coupling Nipples (2 Nos.) And Quick Coupling Socket (1 No.). 122. Xvi. Profile Plate, Anodised Aluminium, 1100X700 Mm, With Carriers, Mounting Frames And Mounting Accessories (To Be Fitted Onto The Hydraulic Workstation) 123. Hydraulic Workstation With 40 Square Mm Aluminium Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide: (1) Worktable €“ Size (Approx.) L1200mmxw900mmxh900 Mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, (2) Drawer €“ Size (Approx.) €“ L460mmxw495mm Xh158mm Each, And Overall Size Of Drawer Unit (Approx.) L470mmxw495mmxh825m M And (3) Drawer Slide Heigh (Approx.) 85Mm. 124. Cut-Section Models For Hydraulic Components Cut Section Model For Hydraulic Components (Set Of 5 Items) 125. File Flat Rough Double Cut 200Mm From High Qulity Alloy Steel ,Long Life Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 126. File, Half Round, Fine Double Cut Length 150Mm From High Qulity Alloy Steel ,Long Life Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 127. File, Round, Fine Double Cut Length 150Mm From High Qulity Alloy Steel ,Long Life Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 128. File Flat, Fine Double Cut Length 150Mm From High Qulity Alloy Steel ,Long Life Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 129. File Square, Fine Double Cut Length 150Mm From High Qulity Alloy Steel ,Long Life Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 130. File Triangular Fine Double Cut Length 150Mm From High Qulity Alloy Steel ,Long Life Strong & Sharp Teeth Profile, Sharp Cutting Capacity With Strong Plastic Handle 131. Scriber 150Mm Length Is 12428:1988 Hardened & Temperedfine Point Suitable For Universal Surface Guage 132. Centre Punch Length 100Mm Made Out Of High Grade Chrome Steel Accurately Machined And Heat Treated. €¢ Deep Knurling On The Body Ensures Firm Grip. €¢ It Has Black Phosphate Finish Generally Conforming To Is 7177-1999 133. Try Square 150 Mm Hardened & Garund , Is:1013-1972 134. Divider Spring Joint Length 150Mm Material-High Carbon Steel Material, Both Legs Are Harden & Tempared, Is:4083-1967 135. Caliper Spring Joint In Side Length 150Mm Material-High Carbon Steel Material, Both Legs Are Harden & Tempared, Is:4083-1967 136. Caliper, Odd Leg, Spring Joint Length 150Mm Material-High Carbon Steel Material, Both Legs Are Harden & Tempared, Is:4083-1967 137. Hammer Ball Pane 220 Gms Generally Conforming To Is 841-1983 Partially Hardened Up To 55 - 58 Hrc On Striking Surfaces Needed As Functional Requirements For All Types Of Hammers. Drop Forged From High Grade Carbon Steel. 138. Cold Chisel Flat And Cross Cut Length 150Mm Made From High Grade Steel,Forged And Ground. €¢ Differential Heat Treatment For Cutting Edge,And Striking End,Ensure Long Life. €¢ Bright,Blue,Painted Finish. €¢ Generally Conforming To Is 5663-1970. 139. Engineers Rule 300Mm Long Front Side: Top Edge 1/2 Mm, Mm. Bottom Edge 1/16Ths, 1/32Nds Reverse Side: Conversion Table Inches To Mm 140. Tape Measuring 10M Graduation In Mm Tape Length : 10 Meters Tape Width : 9.5Mm Weight(In Kgs) : 0.250 €¢ All Measuring Tapes Are Coated With €Œepoxy Basedâ€