Tender For Deployment Of 15 T Farana & Rigger For Farana_Crm2 2000153172 10 10 10 DEPLOYMENT OF HYDRA 7 MON Email : ANKITA.MISHRA@AMNS.IN Contact : Name : Ankita Mishra Item Details : Scope of Work for Farana ( Model- F-15 15TON Farana REQUIRED WITH OPERATOR PROPER PPES HYDRA MUST COMPLY TO ALL AMNS SAFETY NORMS WORKING DAYS: 30 DAYS/MONTH WORKING HRS = 20HRS/DAY DURATION: JUNE2024 TO Dec 2024 1.Deployment of 01 No 15T capacity Farana crane( LONG BOOM) 2.Supply Two Driver with Valid license and two Riggers along with farana. 3.Hours of deployment -24HRS./Day. Driver and rigger should be arranged in 12hr shift with condition that after shift reliever arrived on location then only working driver and rigger will leave site and after sharing information. 4.Fuel, all operational and maintenance spares <(>&<)> maintenance of vehicle are in vendor scope 5. Bill will be certified as per actual availability of service. 6.Loading, Unloading <(>&<)> Shifting of Material, equipment, Consumables, spare parts steel scrap, work at height with man-lifter cage e.g. cleaning ,replacement of spare or work given to be done as per instructions of AM/NS 7.Bill will be certified as per actual hours of service. 8.Farana shall be in good condition to fulfill all statutory requirement and fit for the job. And required to submit and show cer tificate of fitness whenever asker to produce and show(mfg. after CY 2020) Category No.-7,13 Category Type -Statutory,General Name of Category -Driver-Heavy Vehicle,Rigger Area-Plant,Plant Minimum Age on Joining (Years)-23,21 Minimum Qualification -10th pass,8th- 10th pass Min. Work experience (Years)-5,3 to 5 Valid License / Certificate-HMV (License approved by State Govt.), Educational + Experience Certificate Specific safety training -1.HSE <(>&<)> F Induction Training 2.Pre-assessment training 1.HSE <(>&<)> F Induction Training 2.Rigger specific safety 3. W@H Medical Fitness-1.Fitness Certificate. 2.Ear <(>&<)> Eye Test 3.Colour Blindness Test. 1.Fitness Certificate. 2.Ear <(>&<)> Eye Test Certificate 3.Colour Blindness Test. Remark -On the job Training On the job Training + Certification by Safety 11. The secondary product to be lift from yard and shift to the designated place as per sop provide by CRM 2 secondary management. 12. The secondary product to be load in vehicles as per requirement of dispatch. 13. For Hydra,use for work at height as per capacity defined considering safety norms. Page 2 of 3 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000116418 Date 08.07.2024 Submission Date 15.07.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Venkat Sai Taneeru Contact Email venkat.taneeru@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details 14. The material shifting logbook to be maintain and data to be given to CRM 2 secondary management team as per requirement. 15.Daily operator checklist to be maintained by operator. 16.Warning signals light/beam to be fixed on farana. 17.Reverse horn must be equipped with farana. 18.Load indicator should be equipped with farana. 19. Penalties for non-compliance of safety rules, Delay incident/Delay Abnormality will be imposed on the contractor. The same will be deducted from respective month’s invoice of the contractor. 20. Vendor must do gate pass process for manpower <(>&<)> vehicle as per company norms. 21.Rigger and driver interview will be taken by AMNS, and only selected person allowed as driver or rigger Movement of Manpower / Associates at our Hazira Site. 1. No Pedestrian/Cycles/Two Wheelers movement will be allowed inside the Plant Premises. 2. As per Management Directive, transport / movement of associates to <(>&<)> from for Plant should be mandatory in 4 Wheelers and Buses. Bicycles and Two wheelers are strictly not allowed. 3. Vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. Vendors ensure safe t ransportation of their associates from their place of residence to respective work location in the plant and back. The movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. Other Terms: Associate has to undergo Medical Fitness at our Care Nursing Home, AM/NS Township, Hazira. This would be done as per AM/NS India standards and the cost shall be borne by the vendor. AMNS has its own Secures Access system called SCRUM at Hazira Site which is use for processing the Gate Pass. Item Note : 2 2000153172 20 20 10 DIPLOYMENT OF RIGGER 364 TAG Email : ANKITA.MISHRA@AMNS.IN Contact : Name : Ankita Mishra Item Details : Scope of Work for Farana ( Model- F-15 15TON Farana REQUIRED WITH OPERATOR PROPER PPES HYDRA MUST COMPLY TO ALL AMNS SAFETY NORMS WORKING DAYS: 30 DAYS/MONTH WORKING HRS = 20HRS/DAY DURATION: JUNE2024 TO Dec 2024 1.Deployment of 01 No 15T capacity Farana crane( LONG BOOM) 2.Supply Two Driver with Valid license and two Riggers along with farana. 3.Hours of deployment -24HRS./Day. Driver and rigger should be arranged in 12hr shift with condition that after shift reliever arrived on location then only working driver and rigger will leave site and after sharing information. 4.Fuel, all operational and maintenance spares <(>&<)> maintenance of vehicle are in vendor scope 5. Bill will be certified as per actual availability of service. 6.Loading, Unloading <(>&<)> Shifting of Material, equipment, Consumables, spare parts steel scrap, work at height with man-lifter cage e.g. cleaning ,replacement of spare or work given to be done as per instructions of AM/NS 7.Bill will be certified as per actual hours of service. 8.Farana shall be in good condition to fulfill all statutory requirement and fit for the job. And required to submit and show cer tificate of fitness whenever asker to produce and show(mfg. after CY 2020) Category No.-7,13 Category Type -Statutory,General Name of Category -Driver-Heavy Vehicle,Rigger Area-Plant,Plant Minimum Age on Joining (Years)-23,21 Page 3 of 3 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000116418 Date 08.07.2024 Submission Date 15.07.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Venkat Sai Taneeru Contact Email venkat.taneeru@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Minimum Qualification -10th pass,8th- 10th pass Min. Work experience (Years)-5,3 to 5 Valid License / Certificate-HMV (License approved by State Govt.), Educational + Experience Certificate Specific safety training -1.HSE <(>&<)> F Induction Training 2.Pre-assessment training 1.HSE <(>&<)> F Induction Training 2.Rigger specific safety 3. W@H Medical Fitness-1.Fitness Certificate. 2.Ear <(>&<)> Eye Test 3.Colour Blindness Test. 1.Fitness Certificate. 2.Ear <(>&<)> Eye Test Certificate 3.Colour Blindness Test. Remark -On the job Training On the job Training + Certification by Safety 11. The secondary product to be lift from yard and shift to the designated place as per sop provide by CRM 2 secondary management. 12. The secondary product to be load in vehicles as per requirement of dispatch. 13. For Hydra,use for work at height as per capacity defined considering safety norms. 14. The material shifting logbook to be maintain and data to be given to CRM 2 secondary management team as per requirement. 15.Daily operator checklist to be maintained by operator. 16.Warning signals light/beam to be fixed on farana. 17.Reverse horn must be equipped with farana. 18.Load indicator should be equipped with farana. 19. Penalties for non-compliance of safety rules, Delay incident/Delay Abnormality will be imposed on the contractor. The same will be deducted from respective month’s invoice of the contractor. 20. Vendor must do gate pass process for manpower <(>&<)> vehicle as per company norms. 21.Rigger and driver interview will be taken by AMNS, and only selected person allowed as driver or rigger Movement of Manpower / Associates at our Hazira Site. 1. No Pedestrian/Cycles/Two Wheelers movement will be allowed inside the Plant Premises. 2. As per Management Directive, transport / movement of associates to <(>&<)> from for Plant should be mandatory in 4 Wheelers and Buses. Bicycles and Two wheelers are strictly not allowed. 3. Vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. Vendors ensure safe t ransportation of their associates from their place of residence to respective work location in the plant and back. The movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. Other Terms: Associate has to undergo Medical Fitness at our Care Nursing Home, AM/NS Township, Hazira. This would be done as per AM/NS India standards and the cost shall be borne by the vendor. AMNS has its own Secures Access system called SCRUM at Hazira Site which is use for processing the Gate Pass.

Tender Notice

44121485

Indian


Gujarat

July 15, 2024

Key Value

Ref. Documents

Ref. Documents

Ref. Documents

To Download Tender Document Click on the below link

Tender For Deployment Of 15 T Farana & Rigger For Farana_Crm2 2000153172 10 10 10 DEPLOYMENT OF HYDRA 7 MON Email : ANKITA.MISHRA@AMNS.IN Contact : Name : Ankita Mishra Item Details : Scope of Work for Farana ( Model- F-15 15TON Farana REQUIRED WITH OPERATOR PROPER PPES HYDRA MUST COMPLY TO ALL AMNS SAFETY NORMS WORKING DAYS: 30 DAYS/MONTH WORKING HRS = 20HRS/DAY DURATION: JUNE2024 TO Dec 2024 1.Deployment of 01 No 15T capacity Farana crane( LONG BOOM) 2.Supply Two Driver with Valid license and two Riggers along with farana. 3.Hours of deployment -24HRS./Day. Driver and rigger should be arranged in 12hr shift with condition that after shift reliever arrived on location then only working driver and rigger will leave site and after sharing information. 4.Fuel, all operational and maintenance spares <(>&<)> maintenance of vehicle are in vendor scope 5. Bill will be certified as per actual availability of service. 6.Loading, Unloading <(>&<)> Shifting of Material, equipment, Consumables, spare parts steel scrap, work at height with man-lifter cage e.g. cleaning ,replacement of spare or work given to be done as per instructions of AM/NS 7.Bill will be certified as per actual hours of service. 8.Farana shall be in good condition to fulfill all statutory requirement and fit for the job. And required to submit and show cer tificate of fitness whenever asker to produce and show(mfg. after CY 2020) Category No.-7,13 Category Type -Statutory,General Name of Category -Driver-Heavy Vehicle,Rigger Area-Plant,Plant Minimum Age on Joining (Years)-23,21 Minimum Qualification -10th pass,8th- 10th pass Min. Work experience (Years)-5,3 to 5 Valid License / Certificate-HMV (License approved by State Govt.), Educational + Experience Certificate Specific safety training -1.HSE <(>&<)> F Induction Training 2.Pre-assessment training 1.HSE <(>&<)> F Induction Training 2.Rigger specific safety 3. W@H Medical Fitness-1.Fitness Certificate. 2.Ear <(>&<)> Eye Test 3.Colour Blindness Test. 1.Fitness Certificate. 2.Ear <(>&<)> Eye Test Certificate 3.Colour Blindness Test. Remark -On the job Training On the job Training + Certification by Safety 11. The secondary product to be lift from yard and shift to the designated place as per sop provide by CRM 2 secondary management. 12. The secondary product to be load in vehicles as per requirement of dispatch. 13. For Hydra,use for work at height as per capacity defined considering safety norms. Page 2 of 3 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000116418 Date 08.07.2024 Submission Date 15.07.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Venkat Sai Taneeru Contact Email venkat.taneeru@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details 14. The material shifting logbook to be maintain and data to be given to CRM 2 secondary management team as per requirement. 15.Daily operator checklist to be maintained by operator. 16.Warning signals light/beam to be fixed on farana. 17.Reverse horn must be equipped with farana. 18.Load indicator should be equipped with farana. 19. Penalties for non-compliance of safety rules, Delay incident/Delay Abnormality will be imposed on the contractor. The same will be deducted from respective month’s invoice of the contractor. 20. Vendor must do gate pass process for manpower <(>&<)> vehicle as per company norms. 21.Rigger and driver interview will be taken by AMNS, and only selected person allowed as driver or rigger Movement of Manpower / Associates at our Hazira Site. 1. No Pedestrian/Cycles/Two Wheelers movement will be allowed inside the Plant Premises. 2. As per Management Directive, transport / movement of associates to <(>&<)> from for Plant should be mandatory in 4 Wheelers and Buses. Bicycles and Two wheelers are strictly not allowed. 3. Vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. Vendors ensure safe t ransportation of their associates from their place of residence to respective work location in the plant and back. The movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. Other Terms: Associate has to undergo Medical Fitness at our Care Nursing Home, AM/NS Township, Hazira. This would be done as per AM/NS India standards and the cost shall be borne by the vendor. AMNS has its own Secures Access system called SCRUM at Hazira Site which is use for processing the Gate Pass. Item Note : 2 2000153172 20 20 10 DIPLOYMENT OF RIGGER 364 TAG Email : ANKITA.MISHRA@AMNS.IN Contact : Name : Ankita Mishra Item Details : Scope of Work for Farana ( Model- F-15 15TON Farana REQUIRED WITH OPERATOR PROPER PPES HYDRA MUST COMPLY TO ALL AMNS SAFETY NORMS WORKING DAYS: 30 DAYS/MONTH WORKING HRS = 20HRS/DAY DURATION: JUNE2024 TO Dec 2024 1.Deployment of 01 No 15T capacity Farana crane( LONG BOOM) 2.Supply Two Driver with Valid license and two Riggers along with farana. 3.Hours of deployment -24HRS./Day. Driver and rigger should be arranged in 12hr shift with condition that after shift reliever arrived on location then only working driver and rigger will leave site and after sharing information. 4.Fuel, all operational and maintenance spares <(>&<)> maintenance of vehicle are in vendor scope 5. Bill will be certified as per actual availability of service. 6.Loading, Unloading <(>&<)> Shifting of Material, equipment, Consumables, spare parts steel scrap, work at height with man-lifter cage e.g. cleaning ,replacement of spare or work given to be done as per instructions of AM/NS 7.Bill will be certified as per actual hours of service. 8.Farana shall be in good condition to fulfill all statutory requirement and fit for the job. And required to submit and show cer tificate of fitness whenever asker to produce and show(mfg. after CY 2020) Category No.-7,13 Category Type -Statutory,General Name of Category -Driver-Heavy Vehicle,Rigger Area-Plant,Plant Minimum Age on Joining (Years)-23,21 Page 3 of 3 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000116418 Date 08.07.2024 Submission Date 15.07.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Venkat Sai Taneeru Contact Email venkat.taneeru@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Minimum Qualification -10th pass,8th- 10th pass Min. Work experience (Years)-5,3 to 5 Valid License / Certificate-HMV (License approved by State Govt.), Educational + Experience Certificate Specific safety training -1.HSE <(>&<)> F Induction Training 2.Pre-assessment training 1.HSE <(>&<)> F Induction Training 2.Rigger specific safety 3. W@H Medical Fitness-1.Fitness Certificate. 2.Ear <(>&<)> Eye Test 3.Colour Blindness Test. 1.Fitness Certificate. 2.Ear <(>&<)> Eye Test Certificate 3.Colour Blindness Test. Remark -On the job Training On the job Training + Certification by Safety 11. The secondary product to be lift from yard and shift to the designated place as per sop provide by CRM 2 secondary management. 12. The secondary product to be load in vehicles as per requirement of dispatch. 13. For Hydra,use for work at height as per capacity defined considering safety norms. 14. The material shifting logbook to be maintain and data to be given to CRM 2 secondary management team as per requirement. 15.Daily operator checklist to be maintained by operator. 16.Warning signals light/beam to be fixed on farana. 17.Reverse horn must be equipped with farana. 18.Load indicator should be equipped with farana. 19. Penalties for non-compliance of safety rules, Delay incident/Delay Abnormality will be imposed on the contractor. The same will be deducted from respective month’s invoice of the contractor. 20. Vendor must do gate pass process for manpower <(>&<)> vehicle as per company norms. 21.Rigger and driver interview will be taken by AMNS, and only selected person allowed as driver or rigger Movement of Manpower / Associates at our Hazira Site. 1. No Pedestrian/Cycles/Two Wheelers movement will be allowed inside the Plant Premises. 2. As per Management Directive, transport / movement of associates to <(>&<)> from for Plant should be mandatory in 4 Wheelers and Buses. Bicycles and Two wheelers are strictly not allowed. 3. Vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. Vendors ensure safe t ransportation of their associates from their place of residence to respective work location in the plant and back. The movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. Other Terms: Associate has to undergo Medical Fitness at our Care Nursing Home, AM/NS Township, Hazira. This would be done as per AM/NS India standards and the cost shall be borne by the vendor. AMNS has its own Secures Access system called SCRUM at Hazira Site which is use for processing the Gate Pass.