• Home
  • Tender Notice : 45037121

Tender For Repairing And Polishing Of Wooden Furniture At Af Stn Bhuj; 1 BED HARD WITH PLYWOOD TOP:-Removing following old and unserviceable parts / components of“Bed Plywood Top” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD 246, 247) 2 Head rest complete. 3 Foot rest complete. 4 Plywood top with12 mm thick BWR commercial.(Make kitply/Century /Greenply/ National/Bhutan 5 Long rail of first class hard wood (teak wood). 6 Short rail of first class hard wood (teak wood). 7 Both side veneered of Head Rest. 8 Both side veneered of Foot Rest 9 Table Dressing Gents with Mirror:-Removing following old and unserviceable parts / components of“Table dressing gents with mirror” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw,etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD 230) 10 5 mm thick Looking Mirror with 06 mm thickplywood at the back. 11 Complete frame of first class hard wood (teak wood) for mirror . 12 Lower woodenboxmade out of 18mm thick plywood (12 Nos of ply) grade BWRwith 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturers instructions and other side french polishing, 6 mm thick back plywood & bright polished brass knob 40mm dia complete. 13 Peg Table:-Removing following old and unserviceable parts / components of“Peg Table” and Supply & fix new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge.Drg No FD-236 & 277 14 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 15 Legs of first class hard wood (teak wood) 16 Short rail of first class hard wood (teak wood) 17 Longrail of first class hard wood (teak wood). 18 Table centre:-Removing following old and unserviceable parts / components of“Table centre” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge.Drg No FD-235 & 274 19 Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR, typeBB with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 20 Legs of first class hard wood (teak wood) 21 Short rail of first class hard wood (teak wood) 22 Longrail of first class hard wood (teak wood). 23 Teapoy Wooden:-Removing following old and unserviceable parts / components of“Teapoy wooden” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as specified and as directed byEngineer-in-Charge. (Drg No FD-232 & 278) 24 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR, typeBB with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 25 Legs of first class hard wood (teak wood) 26 Short rail of first class hard wood (teak wood) 27 Longrail of first class hard wood (teak wood). 28 Table Computer:-Removing following old and unserviceable parts / components of“Table Computer” and Supply & fix new parts / components of same size, existing pattern andthe same texture, with necessary beading, screw,etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD/E6/MAP/03) 29 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 30 Drawer made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturers instructions and other side french polishing, 6 mm thick bottom plywood with 02 NosTelescopic Channel of best qualityas approved by Engr-In-Charge. 31 Pull out tray for mouse made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturers instructions and other side french polishing, with 02 NosTelescopic Channel of best qualityas approved by Engr-In-Charge. 32 Pull out tray for Key Board made out of 18 mm thick plywood (12 Nos of ply) grade BWR, typeBB with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturers instructions and other side french polishing, with 02 NosTelescopic Channel of best qualityas approved by Engr-In-Charge. 33 FOAM WITH & WITH OUT BACK:-Removing following old and unserviceable parts / components of“FOAM WITH & WITH OUT BACK” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw, nut and bolt etc and polishing as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD-77,78) 34 Seat made ofone piece of first class hard wood (teak wood). 35 Back rest made ofone piece of first class hard wood (teak wood). 36 Table 3x3 wooden:-Removing following old and unserviceable parts / components of“Table 3x3 wooden” and Supply & fix new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD-88 M, 291) 37 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 38 Chair dining with cushioned:-Removing following old and unserviceable parts / components of“Chair dining with cushioned” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD/MAP-II/04) 39 Front Leg made ofone piece of first class hard wood (teak wood). 40 Rear Leg made ofone piece of first class hard wood (teak wood). 41 Bottom stiffener long made ofone piece of first class hard wood (teak wood). 42 Bottom stiffener short made ofone piece of first class hard wood (teak wood). 43 Short rail of seat made ofone piece of first class hard wood (teak wood). 44 Long rail of seat made ofone piece of first class hard wood (teak wood). 45 Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered withrexin. 46 BOARD NOTICE OF SORTS 47 Removing unserviceable Green Baize cloth from Board Notice 4X4 & Supply and fix new Green baize of best quality (as approved by the GE, costing not less than Rs.150 per Rm of standard availabele width) to board notice usiung appropriate size screws incliding minor repair work to wooden frame, complete all as specified and as directed byEngineer-in-Charge and as shown on drawing No FD: 05-09. 48 All as per item No 10.01 above but Board Notice of size 4X3 49 All as per item No 10.01 above but Board Notice of size 6X4 50 All as per item No 10.01 above but Board Notice of size 8X4 51 All as per item No 10.01 above but Board Notice of size 8X6 52 Removing unserviceable plain broken sheet glass of front shutter (one shutter) and connected beading from Board Notice of size 4X4 and supply and fixing plain sheet glass 3mm thich and 1st class hard wood beading of size 10 mm X 10mm with and incliding screws complete all as specified and as directed byEngineer-in-Charge and as shown on drawing No FD 05-09.Make of glass-modiguard/saint Gobin/ Asahi/ Atul. 53 All as per item No 10.06 above but Board Notice of size 4X3 54 All as per item No 10.06 above but Board Notice of size 6X4 55 Removing unservicable soft board and plywood of one shutter of Board Notice of size 4X4 and supply & fixing same size of new 12mm thick soft board and 6mm thick commercial BWR frade plywoood, ISI marked, complete all as specified and as directed byEngineer-in-Charge and as shown on drawing No FD - 05-09.Make Kitply/Century/Green ply/ National/Bhutan Board. 56 All as per item No 10.09 above but Board Notice of size 4X3 57 All as per item No 10.09 above but Board Notice of size 6X4 58 M&L for preparing old posished and newly repaced parts of Board Notice of size 4X4 and applying two coats of french polish to complete board notice complete all as specified and as directed byEngineer-in-Charge and as shown on drawing No FD-05-09. 59 All as per item No 10.12 above but Board Notice of size 4X3 60 All as per item No 10.12 above but Board Notice of size 6X4 61 All as per item No 10.12 above but Board Notice of size 8X4 62 All as per item No 10.12 above but Board Notice of size 8X6 63 TABLE WRITING (STUDY):-Removing following old and unserviceable parts / components of“TABLE WRITING (STUDY) ” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw etc and olishing complete all as shown on drawing & as directed by Engineer-in-charge.Drg No FD-33 & 275, 249 64 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 65 Legs made offirst class hard wood (teak wood). 66 Drawer made out of 12 mm plywood. 67 Shutters out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 68 CHAIR DINING:-Removing following old and unserviceable parts / components of“CHAIR DINING” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-279) 69 Front legs made offirst class hard wood (teak wood). 70 Rear legs made offirst class hard wood (teak wood). 71 long / short rail of seat made offirst class hard wood (teak wood). 72 Stiffener of back made offirst class hard wood (teak wood). 73 Short & long stiffener of bottom made offirst class hard wood (teak wood). 74 TABLE DINING 6 / 8 PERSON:-Removing following old and unserviceable parts / components of“TABLE DINING 6 / 8 PERSON ” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screwetc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD-239 & 273) 75 Top for TABLE DINING 6 PERSON made out of 18 mm thick plywood (12 Nos of ply) grade BWR, typeBB with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 76 Top for TABLE DINING 8 PERSON made out of 18mm thick plywood (12 Nos of ply) grade BWR, typeBB with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 77 Legs made offirst class hard wood (teak wood). 78 Short rail made offirst class hard wood (teak wood). 79 Long rail for TABLE DINING 6 PERSON made offirst class hard wood (teak wood). 80 Long rail for TABLE DINING 8 PERSON made offirst class hard wood (teak wood). 81 CHAIR WOODEN BOTTOM:-Removing following old and unserviceable parts / components of“CHAIR WOODEN BOTTOM” and Supply & fix new parts / components of same size, existing pattern and same materialn of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-56, 285 &225) 82 Front legs made offirst class hard wood (teak wood). 83 Rear legs made offirst class hard wood (teak wood). 84 Front / Rear / Side railof seat made offirst class hard wood (teak wood). 85 Stiffener of back made offirst class hard wood (teak wood). 86 Short & long stiffener of bottom made offirst class hard wood (teak wood). 87 Wooden bottom made out of 6 mm plywood. 88 Material & labour for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane complete all as specified and as directed byEngineer-in-Charge. 89 Material & labour for cushion foam of 40 density with fabric cushion cover for seat of SOFA SET 5/4 seater, Superior quality of foam & cover complete all as specified and as directed byEngineer-in-Charge.(Drg No FD-281.Tapestry cloth approved by GE not less than 340/- per mtrs. 90 CHAIR EASY:-Removing following old and unserviceable parts / components of“CHAIR EASY” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw,etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229) 91 Front / Rear legs made offirst class hard wood (teak wood). 92 Arm rest made offirst class hard wood (teak wood). 93 SeatFront / Rear / side rail made offirst class hard wood (teak wood). 94 BackUpper / bottom rail made offirst class hard wood (teak wood). 95 TABLE DRESSING LADIES:-Removing following old and unserviceable parts / components of“TABLE DRESSING LADIES” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 251) 96 Looking Mirror of approved quality with back of 06 mm plywood and frame 97 Lower woodenbox with drawer made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturers instructions and other side french polishing, 6 mm thick back plywood, 4 mm thick sliding glass, Aluminium channel etc complete all as per drawing. 98 TABLE BED SIDE:-Removing following old and unserviceable parts / components of“TABLE BED SIDE ” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 248 / 246 ) 99 Back of 6 mm thick commercial face plywood. 100 Side (left or right) made out of 18 mm thick plywood with 1mm laminated sunmica top wood finish duly polished at bottom, with first class hardwood (teak wood) beading. 101 Top / middle shelf made out of 18mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading. 102 CHAIR WRITING:-Removing following old and unserviceable parts / components of“CHAIR WRITING” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-250, 280, 285) 103 Front legs made offirst class hard wood (teak wood). 104 Rear legs made offirst class hard wood (teak wood). 105 Front / Rear / Side rail of seat made offirst class hard wood (teak wood). 106 Stiffener of Back made offirst class hard wood (teak wood). 107 Short / long stiffener of bottom made offirst class hard wood (teak wood). 108 TABLE 3 x 2 WITH & WITHOUT DRAWER:-Removing following old and unserviceable parts / components of“TABLE 3 x 2 WITH & WITHOUT DRAWER” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw,etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD-41, 224, 283) 109 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 110 Leg made offirst class hard wood (teak wood). 111 Long rail made offirst class hard wood (teak wood). 112 Short railmade offirst class hard wood (teak wood). 113 Long bottom stiffeners made offirst class hard wood (teak wood). 114 Short bottom stiffeners made offirst class hard wood (teak wood). 115 Complete drawer made out of 12 mm thick plywood. 116 TABLE DINING 1200MM X 900MM:- 117 Supply & fix replacement of unserviceable top of the table with new top of size 4X3 made out of prelaminated particle board of 18mm/19mm thich, exteriou grade, (Phenol bonded) confirming to IS 12823-1990 with 4 mm thick teak wood edging all around of the top duly french polished complete all as specified and as directed byEngineer-in-Charge all as shown on drawing.Make: Green Ply/Kitply/ Duratuf/ Bhutan/ Novapan.(Drawing No FD/Map-II/03) 118 Supply & fix in replacement of unserviceable legs with new legs of seasoned sheesham wood duly french polished, all as shown on drawing. 119 Supply & fix in replacement of unserviceable long rails with new long rails of seaso9ned sheesham wood duly french polished all as shown on drawings. 120 Supply & fix in replacemen t of old brackets with new brackets of seasoned sheesham wood in corners dyly french polished, complete all as shown on drawings. 121 Supply & fix in replacement of unserviceable short rails with new short rails of seasoned sheeesham wood duly French polished ass as shown on drawing. 122 Material & labour for preoeration of old polished surfaces of the table dining 4X3 repaired under item Nos 22.01 to 22.05 above by sxrapping and cleaning and applying one coat of raw sienna and two coats of french polish and matching with the new repaired parts, all as specified and as shown on drawing. 123 REPAIRS TO HAT STAND WITH MIRROR:-Removing following old and unserviceable parts / components of“REPAIRS TO HAT STAND WITH MIRROR” and Supply & fix new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-233) 124 5 mm thick looking mirror. 125 3 mm thick Veneered plywood. 126 9 mm thick Back Plywood. 127 Aluminium Peg. 128 CHAIR WRITING WITH PAD:- 129 Removal of inserviceable rear leg (one leg) for chair writing with pad & supply and fix Ist class hard wood (teak) well seasoned leg (one leg) for chair writing and prepareation of new surfaces and applying two coats of french polish on leg complete all as specified and as directed byEngineer-in-Charge and as shown on drawing Nos FD-250. 130 All as per Item No 24.01 above but front leg (one leg) for chair writing with pad 131 All as per Item No 24.01 above but side rail (one rail) for chair writing with pad 132 All as per Item No 24.01 above but front rail (one rail) of chair writinng with pad 133 All as per Item No 24.01 above but back rail (one rail) of chair writinng with pad 134 All as per Item No 24.01 above but handle with pad (one handle with pad) for chair writinng with pad 135 All as per Item No 24.01 above but handle (one handle) for chair writing with pad 136 All as per Item No 24.01 above but back rest (set of two) of chair writinng with pad 137 All as per Item No 24.01 above but one set of stiffener(set of three stiffeners) of chair writinng with pad 138 Material & labour for preparation of old polished surfaces of the chairs repaired under item Nos 24.01 to 24.09 above by scrapping and cleaning and applying one coat of raw sienna and two coats f french polish and matching with the new repaired parts, all as specified and as shown on drawing 139 Table 1520 mm x 860 mm x 760 mm:-Removing following old and unserviceable parts / components of“ Table 1520 mm x 860 mm x 760 mm” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screwetc and polishing complete all as shown on drawing & as directed by Engineer-in-charge.(Drg No FD-139) 140 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 141 Legs made offirst class hard wood (teak wood). 142 Top rails of section area 25 mm x 100 mm made offirst class hard wood (teak wood). 143 Stiffener of sectional area 25 mm x 50 mm made offirst class hard wood (teak wood). 144 SIDE BOARD:-Removing following old and unserviceable parts / components of“ SIDE BOARD” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD-26 (M) / 371) 145 Back made out of 4 mm thick plywood. 146 Top made out of 18mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading. 147 Door made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading. 148 Drawer made out of 18mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading. 149 100 mm sizesteel hasp & staple. 150 knob 40 mm dia 151 Stool Dressing:-Removing following old and unserviceable parts / components of“Stool dressing” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/07 (Sheet 3 of 3) 152 Legs made out of teak wood 153 Short rail made out of teak wood 154 Front / Rear long rail made out of teak wood. 155 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete all as specified and as directed byEngineer-in-Charge. 156 Chair Easy Cushioned Wooden:-Removing following old and unserviceable parts / components of“Chair Easy Cushioned Wooden” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD -358) 157 Seat of 75 mm thick synthetic foam cushion of density 28 covered with leatherite rexin as approved by Engr -in-charge. 158 Back rest of 50 mm thicksynthetic foam cushion of density 28 covered with leatherite rexin as approved by Engr -in-charge. 159 Hard rubber shoe 160 Repairs to Sofa set 3 Seater by Replacing of seat & back cushion foam 100 mm thick 40 density with fabric tapestry cloth as per sample approved by Engr - in - Charge complete all as specified and as directed byEngineer-in-Charge. (Drg No. HOF-CSM-18, HOF-139,Godrej, Durian & Swadesi) 161 Sofa set 4 Seater:-Removing following old and unserviceable parts / components of“Sofa set 4 Seater” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No - FD - 281 / 258 / 373) 162 Arms made out of teakwood. 163 Front leg made out of teakwood. 164 Rear leg made out of teakwood. 165 Batten for seat and back madeout of teak wood 166 Sofa set 5 SeaterRemoving following old and unserviceable parts / components of“Sofa set 5 Seater” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373) 167 Arms made out of teak wood. 168 Front leg made out of teak wood. 169 Rear leg made out of teak wood. 170 Batten for seat and back madeout of teak wood 171 Bench Workshop:-Removing following old and unserviceable parts / components of“Bench Workshop” and Supply & fix new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No -GE (AF) J / FD / 02 / 01D & 145 M) 172 Top made out of first class hardwood. 173 Leg made out of teak wood of size 760 X 100 X 100 mm. 174 Shelf made of one picesfirst class hardwood (teak wood) 175 Rail made out offirst class hard wood (teak wood) of size 2130mm X 100 X 100 mm. 176 Supply & fix wooden bracket made of first class hard wood (Teak wood)fixing legs to long and short rail veries type of wooned table fixed with screw and duly polishing to match with existing complete all as specified and as directed byEngineer-in-Charge.

Tender Notice

45037121

Military Engineer Services

Indian

bhuj

Gujarat

September 26, 2024

Key Value

25 Lakhs

25 Lakhs

25 Lakhs

To Download Tender Document Click on the below link

Tender For Repairing And Polishing Of Wooden Furniture At Af Stn Bhuj; 1 BED HARD WITH PLYWOOD TOP:-Removing following old and unserviceable parts / components of“Bed Plywood Top” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD 246, 247) 2 Head rest complete. 3 Foot rest complete. 4 Plywood top with12 mm thick BWR commercial.(Make kitply/Century /Greenply/ National/Bhutan 5 Long rail of first class hard wood (teak wood). 6 Short rail of first class hard wood (teak wood). 7 Both side veneered of Head Rest. 8 Both side veneered of Foot Rest 9 Table Dressing Gents with Mirror:-Removing following old and unserviceable parts / components of“Table dressing gents with mirror” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw,etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD 230) 10 5 mm thick Looking Mirror with 06 mm thickplywood at the back. 11 Complete frame of first class hard wood (teak wood) for mirror . 12 Lower woodenboxmade out of 18mm thick plywood (12 Nos of ply) grade BWRwith 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturers instructions and other side french polishing, 6 mm thick back plywood & bright polished brass knob 40mm dia complete. 13 Peg Table:-Removing following old and unserviceable parts / components of“Peg Table” and Supply & fix new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge.Drg No FD-236 & 277 14 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 15 Legs of first class hard wood (teak wood) 16 Short rail of first class hard wood (teak wood) 17 Longrail of first class hard wood (teak wood). 18 Table centre:-Removing following old and unserviceable parts / components of“Table centre” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge.Drg No FD-235 & 274 19 Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR, typeBB with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 20 Legs of first class hard wood (teak wood) 21 Short rail of first class hard wood (teak wood) 22 Longrail of first class hard wood (teak wood). 23 Teapoy Wooden:-Removing following old and unserviceable parts / components of“Teapoy wooden” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as specified and as directed byEngineer-in-Charge. (Drg No FD-232 & 278) 24 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR, typeBB with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 25 Legs of first class hard wood (teak wood) 26 Short rail of first class hard wood (teak wood) 27 Longrail of first class hard wood (teak wood). 28 Table Computer:-Removing following old and unserviceable parts / components of“Table Computer” and Supply & fix new parts / components of same size, existing pattern andthe same texture, with necessary beading, screw,etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD/E6/MAP/03) 29 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 30 Drawer made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturers instructions and other side french polishing, 6 mm thick bottom plywood with 02 NosTelescopic Channel of best qualityas approved by Engr-In-Charge. 31 Pull out tray for mouse made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturers instructions and other side french polishing, with 02 NosTelescopic Channel of best qualityas approved by Engr-In-Charge. 32 Pull out tray for Key Board made out of 18 mm thick plywood (12 Nos of ply) grade BWR, typeBB with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturers instructions and other side french polishing, with 02 NosTelescopic Channel of best qualityas approved by Engr-In-Charge. 33 FOAM WITH & WITH OUT BACK:-Removing following old and unserviceable parts / components of“FOAM WITH & WITH OUT BACK” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw, nut and bolt etc and polishing as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD-77,78) 34 Seat made ofone piece of first class hard wood (teak wood). 35 Back rest made ofone piece of first class hard wood (teak wood). 36 Table 3x3 wooden:-Removing following old and unserviceable parts / components of“Table 3x3 wooden” and Supply & fix new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD-88 M, 291) 37 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 38 Chair dining with cushioned:-Removing following old and unserviceable parts / components of“Chair dining with cushioned” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD/MAP-II/04) 39 Front Leg made ofone piece of first class hard wood (teak wood). 40 Rear Leg made ofone piece of first class hard wood (teak wood). 41 Bottom stiffener long made ofone piece of first class hard wood (teak wood). 42 Bottom stiffener short made ofone piece of first class hard wood (teak wood). 43 Short rail of seat made ofone piece of first class hard wood (teak wood). 44 Long rail of seat made ofone piece of first class hard wood (teak wood). 45 Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered withrexin. 46 BOARD NOTICE OF SORTS 47 Removing unserviceable Green Baize cloth from Board Notice 4X4 & Supply and fix new Green baize of best quality (as approved by the GE, costing not less than Rs.150 per Rm of standard availabele width) to board notice usiung appropriate size screws incliding minor repair work to wooden frame, complete all as specified and as directed byEngineer-in-Charge and as shown on drawing No FD: 05-09. 48 All as per item No 10.01 above but Board Notice of size 4X3 49 All as per item No 10.01 above but Board Notice of size 6X4 50 All as per item No 10.01 above but Board Notice of size 8X4 51 All as per item No 10.01 above but Board Notice of size 8X6 52 Removing unserviceable plain broken sheet glass of front shutter (one shutter) and connected beading from Board Notice of size 4X4 and supply and fixing plain sheet glass 3mm thich and 1st class hard wood beading of size 10 mm X 10mm with and incliding screws complete all as specified and as directed byEngineer-in-Charge and as shown on drawing No FD 05-09.Make of glass-modiguard/saint Gobin/ Asahi/ Atul. 53 All as per item No 10.06 above but Board Notice of size 4X3 54 All as per item No 10.06 above but Board Notice of size 6X4 55 Removing unservicable soft board and plywood of one shutter of Board Notice of size 4X4 and supply & fixing same size of new 12mm thick soft board and 6mm thick commercial BWR frade plywoood, ISI marked, complete all as specified and as directed byEngineer-in-Charge and as shown on drawing No FD - 05-09.Make Kitply/Century/Green ply/ National/Bhutan Board. 56 All as per item No 10.09 above but Board Notice of size 4X3 57 All as per item No 10.09 above but Board Notice of size 6X4 58 M&L for preparing old posished and newly repaced parts of Board Notice of size 4X4 and applying two coats of french polish to complete board notice complete all as specified and as directed byEngineer-in-Charge and as shown on drawing No FD-05-09. 59 All as per item No 10.12 above but Board Notice of size 4X3 60 All as per item No 10.12 above but Board Notice of size 6X4 61 All as per item No 10.12 above but Board Notice of size 8X4 62 All as per item No 10.12 above but Board Notice of size 8X6 63 TABLE WRITING (STUDY):-Removing following old and unserviceable parts / components of“TABLE WRITING (STUDY) ” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw etc and olishing complete all as shown on drawing & as directed by Engineer-in-charge.Drg No FD-33 & 275, 249 64 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 65 Legs made offirst class hard wood (teak wood). 66 Drawer made out of 12 mm plywood. 67 Shutters out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 68 CHAIR DINING:-Removing following old and unserviceable parts / components of“CHAIR DINING” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-279) 69 Front legs made offirst class hard wood (teak wood). 70 Rear legs made offirst class hard wood (teak wood). 71 long / short rail of seat made offirst class hard wood (teak wood). 72 Stiffener of back made offirst class hard wood (teak wood). 73 Short & long stiffener of bottom made offirst class hard wood (teak wood). 74 TABLE DINING 6 / 8 PERSON:-Removing following old and unserviceable parts / components of“TABLE DINING 6 / 8 PERSON ” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screwetc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD-239 & 273) 75 Top for TABLE DINING 6 PERSON made out of 18 mm thick plywood (12 Nos of ply) grade BWR, typeBB with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 76 Top for TABLE DINING 8 PERSON made out of 18mm thick plywood (12 Nos of ply) grade BWR, typeBB with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 77 Legs made offirst class hard wood (teak wood). 78 Short rail made offirst class hard wood (teak wood). 79 Long rail for TABLE DINING 6 PERSON made offirst class hard wood (teak wood). 80 Long rail for TABLE DINING 8 PERSON made offirst class hard wood (teak wood). 81 CHAIR WOODEN BOTTOM:-Removing following old and unserviceable parts / components of“CHAIR WOODEN BOTTOM” and Supply & fix new parts / components of same size, existing pattern and same materialn of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-56, 285 &225) 82 Front legs made offirst class hard wood (teak wood). 83 Rear legs made offirst class hard wood (teak wood). 84 Front / Rear / Side railof seat made offirst class hard wood (teak wood). 85 Stiffener of back made offirst class hard wood (teak wood). 86 Short & long stiffener of bottom made offirst class hard wood (teak wood). 87 Wooden bottom made out of 6 mm plywood. 88 Material & labour for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane complete all as specified and as directed byEngineer-in-Charge. 89 Material & labour for cushion foam of 40 density with fabric cushion cover for seat of SOFA SET 5/4 seater, Superior quality of foam & cover complete all as specified and as directed byEngineer-in-Charge.(Drg No FD-281.Tapestry cloth approved by GE not less than 340/- per mtrs. 90 CHAIR EASY:-Removing following old and unserviceable parts / components of“CHAIR EASY” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw,etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229) 91 Front / Rear legs made offirst class hard wood (teak wood). 92 Arm rest made offirst class hard wood (teak wood). 93 SeatFront / Rear / side rail made offirst class hard wood (teak wood). 94 BackUpper / bottom rail made offirst class hard wood (teak wood). 95 TABLE DRESSING LADIES:-Removing following old and unserviceable parts / components of“TABLE DRESSING LADIES” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 251) 96 Looking Mirror of approved quality with back of 06 mm plywood and frame 97 Lower woodenbox with drawer made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturers instructions and other side french polishing, 6 mm thick back plywood, 4 mm thick sliding glass, Aluminium channel etc complete all as per drawing. 98 TABLE BED SIDE:-Removing following old and unserviceable parts / components of“TABLE BED SIDE ” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 248 / 246 ) 99 Back of 6 mm thick commercial face plywood. 100 Side (left or right) made out of 18 mm thick plywood with 1mm laminated sunmica top wood finish duly polished at bottom, with first class hardwood (teak wood) beading. 101 Top / middle shelf made out of 18mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading. 102 CHAIR WRITING:-Removing following old and unserviceable parts / components of“CHAIR WRITING” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-250, 280, 285) 103 Front legs made offirst class hard wood (teak wood). 104 Rear legs made offirst class hard wood (teak wood). 105 Front / Rear / Side rail of seat made offirst class hard wood (teak wood). 106 Stiffener of Back made offirst class hard wood (teak wood). 107 Short / long stiffener of bottom made offirst class hard wood (teak wood). 108 TABLE 3 x 2 WITH & WITHOUT DRAWER:-Removing following old and unserviceable parts / components of“TABLE 3 x 2 WITH & WITHOUT DRAWER” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw,etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD-41, 224, 283) 109 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 110 Leg made offirst class hard wood (teak wood). 111 Long rail made offirst class hard wood (teak wood). 112 Short railmade offirst class hard wood (teak wood). 113 Long bottom stiffeners made offirst class hard wood (teak wood). 114 Short bottom stiffeners made offirst class hard wood (teak wood). 115 Complete drawer made out of 12 mm thick plywood. 116 TABLE DINING 1200MM X 900MM:- 117 Supply & fix replacement of unserviceable top of the table with new top of size 4X3 made out of prelaminated particle board of 18mm/19mm thich, exteriou grade, (Phenol bonded) confirming to IS 12823-1990 with 4 mm thick teak wood edging all around of the top duly french polished complete all as specified and as directed byEngineer-in-Charge all as shown on drawing.Make: Green Ply/Kitply/ Duratuf/ Bhutan/ Novapan.(Drawing No FD/Map-II/03) 118 Supply & fix in replacement of unserviceable legs with new legs of seasoned sheesham wood duly french polished, all as shown on drawing. 119 Supply & fix in replacement of unserviceable long rails with new long rails of seaso9ned sheesham wood duly french polished all as shown on drawings. 120 Supply & fix in replacemen t of old brackets with new brackets of seasoned sheesham wood in corners dyly french polished, complete all as shown on drawings. 121 Supply & fix in replacement of unserviceable short rails with new short rails of seasoned sheeesham wood duly French polished ass as shown on drawing. 122 Material & labour for preoeration of old polished surfaces of the table dining 4X3 repaired under item Nos 22.01 to 22.05 above by sxrapping and cleaning and applying one coat of raw sienna and two coats of french polish and matching with the new repaired parts, all as specified and as shown on drawing. 123 REPAIRS TO HAT STAND WITH MIRROR:-Removing following old and unserviceable parts / components of“REPAIRS TO HAT STAND WITH MIRROR” and Supply & fix new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-233) 124 5 mm thick looking mirror. 125 3 mm thick Veneered plywood. 126 9 mm thick Back Plywood. 127 Aluminium Peg. 128 CHAIR WRITING WITH PAD:- 129 Removal of inserviceable rear leg (one leg) for chair writing with pad & supply and fix Ist class hard wood (teak) well seasoned leg (one leg) for chair writing and prepareation of new surfaces and applying two coats of french polish on leg complete all as specified and as directed byEngineer-in-Charge and as shown on drawing Nos FD-250. 130 All as per Item No 24.01 above but front leg (one leg) for chair writing with pad 131 All as per Item No 24.01 above but side rail (one rail) for chair writing with pad 132 All as per Item No 24.01 above but front rail (one rail) of chair writinng with pad 133 All as per Item No 24.01 above but back rail (one rail) of chair writinng with pad 134 All as per Item No 24.01 above but handle with pad (one handle with pad) for chair writinng with pad 135 All as per Item No 24.01 above but handle (one handle) for chair writing with pad 136 All as per Item No 24.01 above but back rest (set of two) of chair writinng with pad 137 All as per Item No 24.01 above but one set of stiffener(set of three stiffeners) of chair writinng with pad 138 Material & labour for preparation of old polished surfaces of the chairs repaired under item Nos 24.01 to 24.09 above by scrapping and cleaning and applying one coat of raw sienna and two coats f french polish and matching with the new repaired parts, all as specified and as shown on drawing 139 Table 1520 mm x 860 mm x 760 mm:-Removing following old and unserviceable parts / components of“ Table 1520 mm x 860 mm x 760 mm” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screwetc and polishing complete all as shown on drawing & as directed by Engineer-in-charge.(Drg No FD-139) 140 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete. 141 Legs made offirst class hard wood (teak wood). 142 Top rails of section area 25 mm x 100 mm made offirst class hard wood (teak wood). 143 Stiffener of sectional area 25 mm x 50 mm made offirst class hard wood (teak wood). 144 SIDE BOARD:-Removing following old and unserviceable parts / components of“ SIDE BOARD” and Supply & fix new parts / components of same size, existing pattern andsame texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD-26 (M) / 371) 145 Back made out of 4 mm thick plywood. 146 Top made out of 18mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading. 147 Door made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading. 148 Drawer made out of 18mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading. 149 100 mm sizesteel hasp & staple. 150 knob 40 mm dia 151 Stool Dressing:-Removing following old and unserviceable parts / components of“Stool dressing” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/07 (Sheet 3 of 3) 152 Legs made out of teak wood 153 Short rail made out of teak wood 154 Front / Rear long rail made out of teak wood. 155 Top made out of 18mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top withscrewsincluding 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturers instructions and other side french polishing complete all as specified and as directed byEngineer-in-Charge. 156 Chair Easy Cushioned Wooden:-Removing following old and unserviceable parts / components of“Chair Easy Cushioned Wooden” and Supply & fix new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No FD -358) 157 Seat of 75 mm thick synthetic foam cushion of density 28 covered with leatherite rexin as approved by Engr -in-charge. 158 Back rest of 50 mm thicksynthetic foam cushion of density 28 covered with leatherite rexin as approved by Engr -in-charge. 159 Hard rubber shoe 160 Repairs to Sofa set 3 Seater by Replacing of seat & back cushion foam 100 mm thick 40 density with fabric tapestry cloth as per sample approved by Engr - in - Charge complete all as specified and as directed byEngineer-in-Charge. (Drg No. HOF-CSM-18, HOF-139,Godrej, Durian & Swadesi) 161 Sofa set 4 Seater:-Removing following old and unserviceable parts / components of“Sofa set 4 Seater” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No - FD - 281 / 258 / 373) 162 Arms made out of teakwood. 163 Front leg made out of teakwood. 164 Rear leg made out of teakwood. 165 Batten for seat and back madeout of teak wood 166 Sofa set 5 SeaterRemoving following old and unserviceable parts / components of“Sofa set 5 Seater” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373) 167 Arms made out of teak wood. 168 Front leg made out of teak wood. 169 Rear leg made out of teak wood. 170 Batten for seat and back madeout of teak wood 171 Bench Workshop:-Removing following old and unserviceable parts / components of“Bench Workshop” and Supply & fix new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & complete all as specified and as directed byEngineer-in-Charge. (Drg No -GE (AF) J / FD / 02 / 01D & 145 M) 172 Top made out of first class hardwood. 173 Leg made out of teak wood of size 760 X 100 X 100 mm. 174 Shelf made of one picesfirst class hardwood (teak wood) 175 Rail made out offirst class hard wood (teak wood) of size 2130mm X 100 X 100 mm. 176 Supply & fix wooden bracket made of first class hard wood (Teak wood)fixing legs to long and short rail veries type of wooned table fixed with screw and duly polishing to match with existing complete all as specified and as directed byEngineer-in-Charge.