Gujarat State Electricity Corporation Limited - Gujarat
43308868 tender for casting of standard weight rcc blocks for third party load test at gtps....
43308868 tender for casting of standard weight rcc blocks for third party load test at gtps....
43100943 tender for casting of standard weight rcc blocks for third party load test at gtps....
42636474 casting of standard weight rcc blocks for third party load test at gtps...
42629803 tender for casting of standard weight rcc blocks for third party load test at gtps....
42453265 providing / rising transformer plinth of various transformer center by providing and fixing rcc block including carting the materials at various transformer at various sub division under vapi rural division....
40354394 tenders are invited for works of (1) supply, erection, laying, testing & commissioning of 11/22 kv underground cable x overhead xlpe cable (xlpe cable will be supplied by dgvcl) with 11/22 kv end termination & straight through jointing kits (to be supplied by bidders) & dismantling work under all other schemes. (2) arc for increasing tc plinth height by providing & fixing rcc block. (3) arc for maintenance of various capacity of transformer at various locations. (4) arc for 11/22 kv xlpe underground cable fault finding and providing 11/22 kv heat shrinkable type outdoor end termination & straight through joint kit suitable for 3c x 185 / 240 sq mm cable. (5) transformer chemical earthing work under all schemes. (6) erection & maintenance works of ht/lt lines & tcs under all schemes....
38830760 providing transformer plinth of various transformer centers by providing and fixing rcc block a various location of jurisdiction of vapi gidc sub division under vapi industrial division....
35321771 providing transformer plinth of various transformer center by providing and fixing rcc block in c.c (1:2:4) in block of size 0.6mx0.3mx0.15m including carting the block at various transformer center, lifting the transformer from plinth and rising the plinth by block mansonary in c n (1:6), placing transformer in the position of raised plinth with all cost of material say cement, sand, centering etc. labour and curring the block complete of vadod and bamroli sub division under piplod division. (if required work should be carried out other sub division)...
35321760 providing transformer plinth of various transformer center by providing and fixing rcc block in c.c (1:2:4) in block of size 0.6mx0.3mx0.15m including carting the block at various transformer center, lifting the transformer from plinth and rising the plinth by block mansonary in c n (1:6), placing transformer in the position of raised plinth with all cost of material say cement, sand, centering etc. labour and curring the block complete of all sub division under piplod division. (if required work should be carried out other sub division)...
34249024 tender for tenders are invited for supply & installation of transformer ht terminal; hiring of utility (3+2) seat diesel driven taxi passing bolero or equivalent to same model for 3 years & 24 hours; erection, testing & commissioning of 11/22 kv underground (xlpe cable will be supplied by dgvcl) with cable end termin nation & straight through jointing kits (to be supplied by cont tractor): arc for erection & maintenance work of ht/lt lines & tcs; increasing tc plinth height by providing & fixing rcc block; painting of consumer numbers on mmbs: labor charge for xlpe with uv coating on 55 sq. mm. conductors (2 mm. thick): supply of earthing rod and do rod: supply of hand glows....
34244989 arc for increasing tc plinth height by providing & fixing rcc block under ankleshwar town s / dn &any other area under jurisdiction of ankleshawar ( i ) division...
33965228 providing transformer plinth of various transformer center by providing and fixing rcc block a various location of jurisdiction of sarigam ind. s / dn....
33736960 transformer plinth of various transformer center by provinding and fixing rcc block a various location of jurisdiction dharampur 1 s/dn...
32079337 work of rcc road & paving block for road work from natubha gohils house in front of sidsar sbi bank to ambedkar chowk, ramapir temple to bordiwala chowk kaliyabid sidsar ward rcc + block pack=3 bhavnagar...
31981398 supply of capacitor 1.78mfd / 10capacitor 1.78mfd / 10,capacitor 1.78mfd +/ 10%, +1000 ohm, 400v dc for rcc block of memu tap changer & sw. group size (lxwxh) not more than 42 mm x 17 mm x 28 mm...
31682375 dx type ahu air conditioning system supply, installation, testing and commissioning of dx type ahu air conditioning system for srp clean room at facilitation centre for industrial plasma technologies institute for plasma research per the detailed specifications mentioned in the tender , dx type double skin air handling unit ( dsahu ) : supply of floor mounted dsahu with all required accessories.dsahu constructed out of pre plasticised / plastic coated / powder coated 22 swg inner and 24 wsg outer skin gi sheets with 43±3 mm thick puf section ( density 38±3 kg / cu.mtr ) as the insulating core and comprising of following sections: return air mixing chamber, pre filter with 10 micron filter, cooling coil with intertwined coils ( minimum 6 rows, 2 circuits of 5.5 tr each ) for direct expansion and with thermostatic expansion valve, fan assembly section with fan, motor, drive set, secondary fine filter section with 5 micron filters. the units shall have sa, ra, and fa volume control dampers, ss 304 insulated drain pan etc. fresh air damper shall be fitted with a factory assembled pre filter section containing 50 mm thick washable synthetic type air filters assembled in anodised aluminium / ss flange type frame and ss bird screen / wire mesh with cowl type arrangement. the ahus should be completely air tight. it shall be installed on 150 mm rcc block with vibration isolation pads in exposed area. insulation should be adequate for minimizing heat gain. gi sheet for inner skin shall be of zinc coating of 240 275 gsm. other details as specified in technical specification. the complete dsahu suitable for 415±10 % volts, 50 hz, 3 phase ac supply as described above with capacity of 1000 cfm ( minimum ) at 125 mmwc static pressure with 11.0 tr intertwined cooling coil ( two circuit of 5.5 tr each ) . , installation, testing and commissioning charges for item sr. no. 1.00 , air cooled condensing units with accessories: supply of 5.5 tr single circuit condensing unit ( 1w+1s ) with all required accessories including interconnecting copper pipes / tubes with nitrile insulation etc. as specified in technical specification. compressor shall be hermetic scroll / rotary compressor with r410a / r407c / ipr approved refrigerant and o.d. ( outer diameter ) , minimum wall thickness and quality of seamless copper refrigerant pipes shall be as per copper tube astm b 280 standard. the condensing units shall be mounted on suitable ms supporting structure. the complete air cooled condensing unit suitable for 415±10 % volts, 50 hz, 3 phase ac power supply as described above. , installation, testing and commissioning charges for item sr. no. 3.00 , electrical control panel with instrumentations: design, manufacture, supply of cubicle type, dead front, sheet steel, and wall mounted control panels. the panel shall be suitable for 415 volts, 50 hz, and shall have separate compartments for cu. bus bar. it includes anchoring in to the wall / foundation, wiring and earthing terminating in to the main switch fuse unit in each panel, power / control wiring, earthing etc. following accessories shall be mounted within control panel as per specifications. a. incoming main incoming with 64 / suitable amps tpn mccb complete with following. • digital 3ø panel meter for voltage and current. • o / v, u / v tripping mechanism for voltage fluctuation exceeding 10% of the rated value. • single phase preventers ( spp ) with revers phase protection ( rpp ) and phase indicating lamps. b. out going outgoing feeders of 2 nos. 32 / suitable amps tpn mcb ( 10 ka, c curve ) for 5.5 tr condensing units, 1 nos. 10 / suitable amps tpn mcb ( 10 ka, b curve ) for 3 kw heater bank and 1 nos. 16 / suitable amps tpn mcb ( 10 ka, c curve ) for ahu units with starter ( dol / star delta ) . the compartment shall contain ct operated ammeter with selector switch for each out going feeders. necessary internal control wiring, on / off push button, power wiring & control wiring complete in all respect and as approved by engineer in charge. provision of 1 nos. of 16 amps tpn mcb as spare. c. instrumentation and controls: a microprocessor based controller shall be provided for dx ahu air conditioning system inbuilt in electrical panel or in a separate control panel as per site conditions and system requirements. it should be possible to operate the entire air conditioning system and set working parameters of dx ahus unit from this control unit. microprocessor control should be loaded with all features / functions as specified in technical specification. the vendor shall be solely responsible for the completeness and correctness of the internal wiring, integration and for the proper functioning of the connected equipment. • electrical control panel with all instrumentation, accessories and wiring complete as described above , installation, testing and commissioning charges for sr. no. 5.00 , electrical and control cables: supply, laying and termination of electrical power and control cables from electrical panel to condensing unit, ahu, heater box etc. cable should be laid in perforated gi cable tray with proper saddling. other details as specified in technical specification. , supply of 4 core x 4.0 sq.mm copper multi strand armoured cable. ( electrical panel to od condensing units ) , lying and termination charges for sr. no. 7.01 , supply of 3 core x 2.5 sq.mm copper multi strand armoured cable. ( electrical panel to ahu units ) , lying and termination charges for sr. no. 7.03 , 4 core x 2.5 sq.mm copper multi strand armoured cable. ( electrical panel to duct heater ) , lying and termination charges for sr. no. 7.05 , 4 core x 1.5 sq. mm copper flexible control cable. ( electrical panel to od condensing unit and ahu ) , lying and termination charges for sr. no. 7.07 , 2 core x 1.5 sq. mm copper flexible control cable. ( electrical panel to heater panel and dp switch ) , lying and termination charges for sr. no. 7.09 , 2 no. 3 mm dia. copper wires set for earthing. , lying and terminaion charges for sr. no. 7.11 , ducting: supply, fabrication of sheet metal ducts as per is 655 and is 277 according to the approved drawing, including necessary angle frames, suspenders, anchor fasteners, nut & bolts, rubber gaskets, and the transition piece between blower and supply air duct ( as per technical specification ) . duct sheet shall be 22 swg galvanised steel sheet ( zinc coating of minimum 240 275 gsm ) or aluminium rectangular ducts as stated above. all nut bolts should be hot dip galvanized / zinc coated. preparation of pcc footing with ms support structure required for exposed duct support not in scope of ducting. , installation and testing and commissioning charges for sr. no. 8.00 , fire damper: supply of approx.400 mm x 350 mm or suitable required size fusible link type fire damper in sa path. the damper shall be as per ul listed ul 555; 1995. the damper shall be constructed out of 16g galvanized sheet steel. other details as specified in technical specification. , installation and testing and commissioning charges for sr. no. 10.00 , air duct heater: supply of flanged in type 3 kw ( 3x 1 kw ) electric air duct heater of approx. 400 mm x 350 mm or suitable required size with ip 54 grade terminal enclosure & component panel containing heater terminals, wiring, terminal blocks, safety devices like thermostat ( automatic reset type ) , thermal cut out ( manual reset type ) , dp switch ( air differential pressure switch ) etc. moc of tube sheath and fins should be of ss 304 grade. other details as specified in technical specification. , installation, testing and commissioning charges for sr. no. 12.00 , thermal insulation of sa / ra exposed duct: supply of thermal insulation for sa / ra exposed duct by minimum 25 mm thick closed cell elastomeric nitrile rubber foam as described in technical specifications. insulation material should be class o, fire retardant & self extinguishing and factory laminated glass cloths ( gc ) facing for long term mechanical strength and better aesthetics. test certificates to be furnished. colour / shade of the insulation face will be decided by the engineer in charge, ipr. , installation, testing and commissioning charges for sr. no. 14.00 , rcc / pcc platform foundation for ahu & odu: preparation of rcc / pcc platform of suitable size for placement of ahu and 2 nos. of condensing units as per attached drawing and ahu size. it also includes preparation of minimum 3 mm thick frp shed at required height with excess in size than platform size to protect ahu, odu and ducts from rain. necessary support structures with painting, foundation, fasteners, clamps etc. for frp shed and sealing with combination of silicon sealant, bitumen sheet, suitable sheet etc. to make leak proof will be in contractors scope. painting of support material with one coat zinc primer and two coat enamel paint of approved shade as per ipr engineer in charge. , minor civil and other works: minor civil works required to complete the entire work includes: • dismantling of 1 nos. ahu, 1 nos. condensing unit, ducting, existing frp shed, electric control panel & accessories and lifting / shifting to place as per instruction of ipr engineer in charge within fcipt campus. • preparation of pcc footing with ms support structure required for exposed duct supports. • other civil and associated works required to be carry out for the erections / installations of all the equipments. above mentioned work and any other necessary work as indicate / instructed by engineer in charge of work to complete the work in all respect. minor civil and other works as described above....
31579528 work of rcc road & paving block for road work from natubha gohils house in front of sidsar sbi bank to ambedkar chowk, ramapir temple to bordiwala chowk kaliyabid sidsar ward rcc + block pack=3 bhavnagar...
30757184 tender for providing and fixing rcc block in c:c (1:2:4) block size 0.6m*0.3m*0.15m for raising of plinth for transformer centers under vapi town s/dn....
29218278 tender for providing transformer plinth of various transformer centerby providing and fixing rcc block in c.c(1:2:4) in block of size 0.6mx0.3mx0.15m including carting the block at various transformer center, lifting the transformer from plinth and rising the plinth by block mansonary in c n (1:6), placing transformer in the position of raised plinth with all cost of material say cement, sand, centering etc. labour and curring the block complete of vadod sub division under piplod division.(if required work should be carried out other sub division)...
29049051 tender for pump room, protection wall, intake well pipe line thrush block and related work, intake well fabrication, rcc block work....
28758868 providing transformer plinth of various transformer centerby providing and fixing rcc block in c.c(1:2:4) in block of size 0.6mx0.3mx0.15m including carting the block at various transformer center, lifting the transformer from plinth and rising the plinth by block mansonary in c n (1:6), placing transformer in the position of raised plinth with all cost of material say cement, sand, centering etc. labour and curring the block complete of bamroli sub division under piplod division.(if required work should be carried out other sub division)...
28621393 open tender for providing & placing cable route marker of precasst rcc block made in m 200 concrete of size 220*75*800mm having top width round shaped as per drawing incluuding providing & laying reinforcement steel of 1 no*10mm dia steel main bars as per drawing including necessary excavation from work of steel sheets, curing, finishing all the surfaces and placing position at site includind fixing block by providing & laying 75mm thick pcc(1:4:8) on all vertical sides & bottom of precast rcc block as per drawing etc complete.(rate is inclusive of cost of form work and reinforcement steel).(inclusive of gst)...
28397629 providing transformer plinth of various transformer centerby providing and fixing rcc block in c.c(1:2:4) in block of size 0.6mx0.3mx0.15m including carting the block at various transformer center, lifting the transformer from plinth and rising the plinth by block mansonary in c n (1:6), placing transformer in the position of raised plinth with all cost of material say cement, sand, centering etc. labour and curring the block complete of bamroli sub division under piplod division...
28004415 1sttime limit extension tender notice providing transformer plinth of various transformer center by providing and fixing rcc block in c.c (1:2:4) in block of size 0.6mx0.3mx0.15m including carting the block at various transformer center, lifting the transformer from plinth and rising the plinth by block mansonary in c n (1:6), placing transformer in the position of raised plinth with all cost of material say cement, sand, centering etc. labour and curring the block complete of magdalla sub division under piplod division...
27922128 providing transformer plinth of various transformer centerby providing and fixing rcc block in c.c(1:2:4) in block of size 0.6mx0.3mx0.15m including carting the block at various transformer center, lifting the transformer from plinth and rising the plinth by block mansonary in c n (1:6), placing transformer in the position of raised plinth with all cost of material say cement, sand, centering etc. labour and curring the block complete of magdalla sub division under piplod division...
27682896 arc for increasing tc plinth height by providing & fixing rcc block under ankleshwar town s/dn &any other area under jurisdiction of ankleshawar (i) division...
27679875 tenders are invited for arc of painting of numbers on ht/lt poles and mmbs for ankleshwar east sub division: increasing height of tc plinths by providing and fixing of rcc blocks for ankleshwar town sub division: labour charge for xlpe with uv coating on 55 sq. mm conductors under the jurisdiction of ankleshwar industrial division....
27289990 providing transformers plinth of various transformer center by providing and fixing rcc block a variousof transformer center at sarigam ind. s/dn....
26651162 tender for water supply, drainage, rcc block work....
26156358 supply of , lower duty hot air gun temp, 300 degree to 500 degree centigrate, 750 1500 watt, air flow and high continue operation, 30mm cable, 50 hz, 240 v. make boss, hitachi, siemens or l&t, capacitor 1.78 microfarad ( mfd ) + / 10%, 100ohm, 400v dc for rcc block of memu tap changer & sw. group size ( lxwxh ) not more than 42 mm x 17 mm x 28 mm...
25825083 providing transformer plinth of various transformer centerby providing and fixing rcc block in c.c(1:2:4) in block of size 0.6mx0.3mx0.15m including carting the block at various transformer center, lifting the transformer from plinth and rising the plinth by block mansonary in c n (1:6), placing transformer in the position of raised plinth with all cost of material say cement, sand, centering etc. labour and curring the block complete of piplod sub division under piplod division.(if required work should be carried out other sub division)...
25713307 supply of boltless mechanical wedge connectors, annual maintenance contract for 3 kva, ups, erection of ht/lt and tc works, under ground cable work, replacement of 1ph meter/service lines and new connections, providing and fixing rcc blocks and transformer ht terminal protectors under jurisdiction....
25706511 arc for increasing tc plinth height by providing & fixing rcc block under ankleshwar gidc s/dn &any otherarea under jurisdiction of ankleshawar (i) division...
25697320 supply of , clamp meter (tong tester with 6000 count, 600a ac current with basic accuracy 1.5 % 600 v ac/dc voltage with basic accuracy 1.5% or better resistance range 5m ohm or better model md 9210 metrel make with rubber holster equivalents megger/fluke/motwane., lower duty hot air gun temp, 300 degree to 500 degree centigrate, 750 1500 watt,air flow and high continue operation, 30mm cable, 50 hz, 240 v. make boss, hitachi, siemens or l&t, capacitor 1.78 microfarad(mfd) +/ 10%, 100ohm, 400v dc for rcc block of memu tap changer & sw. group size (lxwxh) not more than 42 mm x 17 mm x 28 mm...
25252085 supply of , clamp meter (tong tester with 6000 count, 600a ac current with basic accuracy 1.5 % 600 v ac/dc voltage with basic accuracy 1.5% or better resistance range 5m ohm or better model md 9210 metrel make with rubber holster equivalents megger/fluke/motwane., lower duty hot air gun temp, 300 degree to 500 degree centigrate, 750 1500 watt,air flow and high continue operation, 30mm cable, 50 hz, 240 v. make boss, hitachi, siemens or l&t, capacitor 1.78 microfarad(mfd) +/ 10%, 100ohm, 400v dc for rcc block of memu tap changer & sw. group size (lxwxh) not more than 42 mm x 17 mm x 28 mm...
25057167 tender for providing transformer plinth of various transformer centerby providing and fixing rcc block in c.c(1:2:4) in block of size 0.6mx0.3mx0.15m including carting the block at various transformer center, lifting the transformer from plinth and rising the plinth by block mansonary in c n (1:6), placing transformer in the position of raised plinth with all cost of material say cement, sand, centering etc. labour and curring the block complete of vadod sub division under piplod division.(if required work should be carried out other sub division)...
24767338 tender for providing transformer plinth of various transformer centerby providing and fixing rcc block in c.c(1:2:4) in block of size 0.6mx0.3mx0.15m including carting the block at various transformer center, lifting the transformer from plinth and rising the plinth by block mansonary in c n (1:6), placing transformer in the position of raised plinth with all cost of material say cement, sand, centering etc. labour and curring the block complete of bamroli sub division under piplod division....
24537671 providing transformers plinth of various transformer center by providing and fixing rcc block a variousof transformer center at sarigam ind. s/dn....
24374064 supply of sanitation item, submersible motor pump, pvc column pipe, galvanized pipe, pump repair work, supply of water supply hardware materials, rcc frame cover, rcc pipe, stationery, repair and servicing of computer, printer, supply of computer spare parts, maintenance of cpomputer software, bulk sms work, videography and photography, xerox work, book binding, stationery printing, tractor services, supply of oil for tractor, jcb, led light, street light material and fitting material, brick, sand, grit, cement, dust, metal, iron grill/ board, metal labour work, hiring of jcb, tractor, services of air conditioner, supply of chocolate and biscuit, bore well work, filling of fire safety gas, service of jcb machine and spare parts, providing of labour, supply of rcc block, xerox machine service and toner, printing of pre printer receipt, stationery, repair of water works valve, supply of digital auto on off controlling system....
22919694 tender for providing/raising the transformer plinth height of various transformer center by providing and fixing rcc block in c.c.(1:2:4) in block size 0.60cm*0.30m 0.15m including carting of block at various transformer form the plinth, raising the plinth b block masonary in position on the raised plinth with all cose of materials say cement the block etc. completed by contractor.navsari r s/dn.(as per schedule b)...
22919669 tender for providing/raising the transformer plinth height of various transformer center by providing and fixing rcc block in c.c.(1:2:4) in block size 0.60cm*0.30m 0.15m including carting of block at various transformer form the plinth, raising the plinth b block masonary in position on the raised plinth with all cose of materials say cement the block etc. completed by contractor.navsari r s/dn.(as per schedule b)...
22738280 providing transformers plinth of various transformer center by providing and fixing rcc block a variousof transformer center at bhilad s/dn....
22090789 tender for providing transformer plinth of various transformer centres by providing and fixing rcc block in c.c.(1:2:4) in block of size 0.60mx0.30mx0.15m including carting the block at varius transformer centre, lifting the transformer from plinth rasing the plinth by block masonry in c n (1:6) , placing transformer in the position of the raising plinth with all cost of materials say cement, sand, entering etc. labour andcuring the block etc. complete. for vadod sub divison of piplod division(pld 63)...
22012709 tender for providing transformer plinth of various transformer centres by providing and fixing rcc block in c.c.(1:2:4) in block of size 0.60mx0.30mx0.15m including carting the block at varius transformer centre, lifting the transformer from plinth rasing the plinth by block masonry in c n (1:6) , placing transformer in the position of the raising plinth with all cost of materials say cement, sand, entering etc. labour andcuring the block etc. complete. for vadod sub divison of piplod division....
21566718 supply of capacitor 1.78 microfarad, capacitor 1.78 microfarad(mfd) +/ 10%, 100ohm, 400v dc for rcc block of memu tap changer & sw. group size (lxwxh) not more than 42 mm x 17 mm x 28 mm...
21160452 tender for providing transformer plinth of various transformer centres by providing and fixing rcc block in c.c.(1:2:4) in block of size 0.60mx0.30mx0.15m including carting the block at varies transformer centre, lifting the transformer from plinth rising the plinth by block masonry in c n (1:6) , placing transformer in the position of the raising plinth with all cost of materials say cement, sand,centering etc. labour andcuring the block etc. complete. for ichchhapore sub division of piplod division...
21054218 tender for providing transformer plinth of various transformer centres by providing and fixing rcc block in c.c.(1:2:4) in block of size 0.60mx0.30mx0.15m including carting the block at varius transformer centre, lifting the transformer from plinth rasing the plinth by block masonry in c n (1:6) , placing transformer in the position of the raising plinth with all cost of materials say cement, sand,centering etc. labour andcuring the block etc. complete. for ichchhapore sub divison of piplod division...
20656650 supply of sanitation material, submersible pump, pvc column pipe, galvanized pipe, hardware material, rcc frame cover, rcc pipe, stationery, computer, printer, computer spare parts, repairing of submersible motor pump, maintenance of computer software, bulk sms work, videography and photography work, xerox work, book binding and stationery printing work, tractor service work, supply of oil, street light material and fitting, brick, sand, grit, cement, grit, dust, metal, making of iron grill/ board, labour work, a.c. services and gas filling work, supply of chocolate and biscuit, bore well work, supply of pvc pipe, gas filling in fire safety machine, jcb service spare, rcc block, xerox machine services, hiring of tractor, car, printing of stationery, valve repairing, supply of digital auto on off control system....
20614063 providing transformer plinth of various transformer centres by providing and fixing rcc block in c.c.(1:2:4) in block of size 0.60mx0.30mx0.15m including carting the block at varius transformer centre, lifting the transformer from plinth rasing the plinth by block masonry in c n (1:6) , placing transformer in the position of the raising plinth with all cost of materials say cement, sand,centering etc. labour andcuring the block etc. complete. for bamroli sub divison of piplod division...
20600277 providing transformer plinth of various transformer centers by providing and fixing rcc block in c.c.(1:2:4) in block of size 0.60mx0.30mx0.15m including carting the block at various transformer centre, lifting the transformer from plinth rasing the plinth by block masonry in c n (1:6) , placing transformer in the position of the raising plinth with all cost of materials say cement, sand,centering etc. labour andcuring the block etc. complete for vadod sub division under piplod division extension...