Arcelor Mittal Nippon Steel India Limited - Gujarat
44626367 tender for m6 various mech. sd jobs tentative date 20.09.2024 2000145329 10 10 60 erection of pipe 60 inm 10 dismantling of structures 6 to 40 scaffolding with material above 20 mtr 432 m3 30 sand blasting & painting 6 to 20 fabrication of ms structure 6 to 50 fabrication of pipe 90 ind email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod#6 furnace bustle deck area, furnace shell water collection tray replacement job. quantum of job : working height (elevation) – 55m approx. furnace shell diameter – 10m approx. structure dismantling – 6 ton approx. structure fabrication <(>&<)> erection – 6 ton approx. all structural material sand blasting, primer coating and painting – 6 ton approx. scaffolding above 20m – 432 m3 approx. 3 inch (schedule 40) ms drain line fabrication – 90 ind 3 inch (schedule 40) ms drain line erection – 60 inm plate cutting <(>&<)> fabrication details. square collection tray dimension 4.5mx3.5m14mm – 1 set square plate height plate – l 4.5m x h 400mm x thick. 14mm – 2 no square plate height plate – l 3.5m x h 400mm x thick. 14mm – 2 no square collection tray bottom support, ismb 200, 3.5m long – 8 no square collection tray bottom support, ismb150, 700mm long – 12 no furnace shell 10m od surrounding horizontal plate od 10.4m x id 10m x thick. 14mm – 1 no (to be bend manually in reference of furnace shell) furnace shell 10mtr od surrounding vertical plate od 10.4m x h 300mm x thick. 3mm – 1 no (to be bend manually in reference of furnace shell) furnace shell 10mtr od surrounding horizontal plate support 50/50/6 400 length – 30 nos. ss plate cutting – 4.5m x4.5m x 8mm <(>&<)> fit up/erection with furnace shell at 51m elevation. ss fillet welding – 4.5m + ss ss welding – 20m ss 400 mm long plate cutting (5mm thick) – 18m support fabrication <(>&<)> erection for tray supporting – 02 ton. contractor scope: 1. get the permit from the control room / site engineer, get the sign of field controller. 2. job to be started after proper toolbox talk (tbt) given to all contractor associates. additional work at height permit to be taken if required. 3. standard maintenance practice (smp) of structure replacement to be carried out for the jobs to all manpower. smp and hirac number must be mentioned in permit. 4. before starting the job, the fire extinguisher and water hose must be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets to be arranged by contractor. 5. all safety precautions must be followed by the contractor and its technicians. they must wear safety belts while performing jobs at height above 1.8m. use safety belt and lifeline and work area to be barricaded. as per job requirement technician must have rigger pass, work at height pass, crane operator pass, welder pass etc. 6. 12mm ss wire rope to be use in lifeline, rope to be clamping through clamp. 7. safety belt to be hooked up with permanent structure, if required page 2 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details hook to be fabricated and welded. 8. crane/hydra will be provided by am/ns as per availability, otherwise job to be done manually /by chain blocks. crane operation for material shifting must be done by the contract supervisor. (no technicians are allowed to operate the crane). 9. issue of material from main store and shifting from stock yard to work site. 10. for all plates sand blasting, primer coating and painting job to be done and it is in contractor scope. all structures should be replaced with sand blasting and structure coating. 11. all welding joints must be painted by the contractor and scaffolding must be removed after completing this. 12. if any scaffolding to be required to perform the job at height, same to be prepared by contractor. scaffolding will be used after certification only from the am/ns safety engineer. 13. using co meter in job is mandatory and wind direction with co level to be checked in job. working area co level should not be more than 50 ppm. 14. m5 furnace area damaged structure cutting to be done and to be fixed back with new structure. 15. contractors must make proper arrangements for any hot work to control sparks falling on the downward deck to avoid any accident. 16. contractors should deploy competent supervisors and safety officers on a round the clock basis to supervise and complete the jobs in time.do necessary correction as per am/ns engineer if required. 17. all the machines, cutting/welding machines, tools, and consumable items etc., required for the job will be arranged by the contractor. all welding and sharp edge must be grinded. all dismantled material to be shifted back to storage/scrap yard. 18. all safety items like safety shoes, safety helmets, safety belts, lifeline, fall arrestor, hand gloves etc. are to be arranged by the contractor for their manpower. 19. any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. am/ns scope : 1. co ordination for work permit. 2. all permanent material <(>&<)> special electrodes. 3. hydra, trailer, and crane will be provided as per availability. 4. drinking water, power supply, lighting facilities, working platform etc. for workmen at plant site. 5. job certification for executed jobs. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. violation of any hse norms. 3. if delay in completion of job. for arcelormittal nippon steel india ltd. item note : 2 2000155524 20 20 10 reformer top cover blrf op/cln/hot tigtn 576 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod#6 reformer tube top cover blind flange opening, closing and hot tightening job. quantum mof job : working elevation : reformet top, high temperature zone. end cover blind size : 6 inch qty. : 576 no total flange opening : 576 no total flange closing : 576 no after reformer light up and achieving box temperature all 576 reformer tubes hot tightening to be done for 2 times. page 3 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details scaffolding above 20m height : 800 m3 approx. tentative date of shut down : 20th sept. 2024 contractor scope : 1. get the work permit as per nature of work from site in charge/the control room, to be got sign of field controller and to be sign in as holder by experienced supervisor. 2. safety talk/hirac to be carried out for the jobs to all manpower. smp and hirac no. must be mentioned in work permit. 3. all safety precautions must be followed by the contractor and its manpower. all ppes to be wear as per work nature. use safety belt and lifeline while working at height. work area to be barricaded. 4. as per job nature technician must have rigger pass, work at height pass, eot crane operator pass and welder pass. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. 12mm ss wire rope to be used in lifeline, rope to be clamping through clamp. safety belt to be hooked up with permanent structure, if required hook to be fabricated and welded. 7. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged. 8. scaffolding is in contractor scope with all materials. to be certified by amns engineer. green tag to be fixed and then only scaf folding to be used. work at height pass and ecg report must be required for job as per safety norms. 9. after completion of the job, scaffolding to be removed on priority after site in charge clearance. 10. reformer tube top cover opening and closing. 11. total 576 nos reformer tube top cover to be opened for inspection after clearance same to be box up. nos of top cover to be open/closed as per operation team requirement, qty. will be certified as per job done on site. 12. contractor must open requested top cover in minimum time with pneumatic wrench. 13. before opening system pressure to be ensure to zero. 14. top cover to be open. removed fastener to be kept in diesel drum and same to be re use. 15. after inspection from production side same to be box up. all flange joint must be leak proof. to be attended in odd hours also. 16. during box up inside glass wool to be ensure with area engineer. 17. top cover to be box up with new gasket. gasket area to be clean properly. 18. top cover hot tightening to be done 3 times as per production clearance. if any leakage same to be attend for that manpower to be ready in 24 hours. 19. top cover hot tightening can be done whenever clearance received from production side for plant start up so vendor will have ability to provide manpower in day/night or in odd hour also. 20. portable machines is to be shifted before 2 days of shutdown for certification and connection. 21. shifting of all materials required for the job to be shift from workshop or main store to work area. 22. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. 23. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 24. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done by qualified welders approved by am/ns. all welding joints is to be dp page 4 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details tested. dp test consumables are in contractor scope. 25. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 26. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 27. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site, round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 28. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope : 1. all permanent materials will be provided 2. power supply, lighting facilities, working platform etc. for workmen at plant site. 3. job certification for executed jobs. 4. electrical certification of tools will be done by am/ns electrical engineer. 5. co ordination for work permit. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. m/s arcelormittal nippon steel india ltd. item note : 3 2000155524 30 30 10 tgfc,cfc,bsg & sgc water strn cln job 1 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 tgfc, cfc, bsg <(>&<)> sgc water strainer removal for cleaning and box up job. quantum of job: tgfc water strainer, size 16 inch – 1 no cfc water strainer, size 14 inch – 1 no bsg water strainer, size 3 inch – 2 no sgc water strainer, size 4 inch – 4 no stranger inside mest removal, cleaning and box up. if inside mesh is damaged more then same to be made by mesh sheet. if old strainer is damaged more then whole strainer to be replaced. reqiured rectification to be done if face to face distacne need to adjust as per site engineer instruction. tentative date of shutdown: 20th sept. 2024 contractor’s scope: 1. get the work permit as per nature of work from site in charge/the control room, to be got sign of field controller and to be sign in as holder by experienced supervisor. 2. safety talk/hirac to be carried out for the jobs to all manpower. smp and hirac no. must be mentioned in work permit. 3. all safety precautions must be followed by the contractor and its manpower. all ppes to be wear as per work nature. use safety belt and lifeline while working at height. work area to be barricaded. 4. as per job nature technician must have rigger pass, work at height pass, eot crane operator pass and welder pass. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. all water strainer end flange to be open. before that ensure valve to be isolated. page 5 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 7. strainer to be removed. 8. strainer to be replaced with one to one. 9. if any welding joints comes same to be done of 3 inch. 10. water line to be flushed by production. for that end blind to be open if required 11. cleaning the gasket area and pasting new gasket. 12. fix the strainer inside spool and box up to be done 13. leak checking and rectification. 14. portable machines is to be shifted before 2 days of shutdown for certification and connection. 15. shifting of all materials required for the job to be shift from workshop or main store to work area. 16. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. 17. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 18. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done by qualified welders approved by am/ns. all welding joints is to be dp tested. dp test consumables are in contractor scope. 19. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 20. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 21. all scrap to be cut into 1m length and scrap material to be loaded <(>&<)> shifted at specified location as per am/ns engineer. 22. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site, round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 23. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope: 1. all permanent material <(>&<)> special electrodes to be provide if required. 2. power supply, lighting facilities, working platform, etc. for workmen at plant site 3. job certification for executed jobs. 4. electrical certification will be done by am/ns electrical engineer. 5. co ordination for work permit specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. for arcelormittal nippon steel inda ltd. item note : page 6 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 4 2000155524 40 40 10 pgc,sgc,tgfc,cgc sealdrain op/cln/boxup 9 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 all pgc, sgc, tgfc and cfc to seal leg drain line opening for cleaning <(>&<)> box up job. quantum of job : elevation – 0m, ground floor all drain line opening for all compressor and silencer. flange opening <(>&<)> cloasing, 2 inch – 16 no approx. for one compressor and silencer. silencer 4 inch drain valve open for cleaning – 9 no total compressor – 9 no tentative date of shut down: 20 sept. 2024 contractor scope: 1. get the work permit/hot work permit from area site in charge/the control room, get the sign of field controller 2. safety talk/hirac to be carried out for the jobs to all manpower. 3. all safety precautions must be followed by the contractor and its technicians. must wear safety belt while performing job. use safety belt and lifeline. work area to be barricaded. as per job, technician must have rigger pass, work at height pass, crane operator pass, welder pass. 4. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged by the contractor. 5. before starting the job, the fire extinguisher and water hose must be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. 2 drain line opening and after cleaning. cleaning to be ensure with production team after clearance from production side same to be box up with proper gasket. 7. compressor and silencer drain line to be open from seal leg area side after cleaning same to be box up with new gasket 8. silencer 4 drain valve also to be open for cleaning after cleaning same to be box up and end blind to be fixed. 9. drain line 2 damage rubber bellow and valve to be replaced as per instruction from am/ns engineer. 10. if found any leakage in drain line same area welding to be done. 11. line supports and clamp to be provided as per instruction of site in charge 12. trial to be taken with am/ns engineer and if leakages found to be rectified immediately on odd hours also. 12. during seal leg side flange opening if scaffolding required same to be fixed and that area grating to be removed and after job completion grating to be fixed. all joints must be leak proof. any leak must be attended within 1 hour in odd hours. 13. shifting of all materials required for the job to be shift from workshop or main store to work area. 14. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. 15. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 16. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done by qualified welders approved by am/ns. all welding joints is to be dp tested. dp test consumables are in contractor scope. page 7 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 17. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 18. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 19. all scrap to be cut into 1m length and scrap material to be loaded <(>&<)> shifted at specified location as per am/ns engineer. 20. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site, round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 21. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope: 1. all permanent material <(>&<)> special electrodes to be provide if required. 2. power supply, lighting facilities, working platform, etc. for workmen at plant site 3. job certification for executed jobs. 4. electrical certification will be done by am/ns electrical engineer. 6. co ordination for work permit is in am/ns’s scope. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. for arcelormittal nippon steel inda ltd. item note : 5 2000155524 60 50 10 tgf orifice removal & line cleaning 50 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 top gas fuel (tgf) orifice and its line opening for cleaning and box up job. quantum of job : tgf orifice size – 3 inch 3 inch flange opening <(>&<)> closing 3 inch pipe to be removed for cleaning and after cleaning same to be box up. (length approx. 3m) the jammed lines to be cut and to be weld for rodding for cleaning the lines. all open lines to be boxed up and with proper orifice and new gasket. cleaning will be done by production team. total qty. 50 no elevation: 0 to 5m tentative date of shut down : 20th sept. 2024 contractor scope : 1. get the work permit as per nature of work from site in charge/the control room, to be got sign of field controller and to be sign in as holder by experienced supervisor. 2. safety talk/hirac to be carried out for the jobs to all manpower. smp and hirac no. must be mentioned in work permit. 3. all safety precautions must be followed by the contractor and its manpower. all ppes to be wear as per work nature. use safety belt and lifeline while working at height. work area to be barricaded. 4. as per job nature technician must have rigger pass, work at height pass, eot crane operator pass and welder pass. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work page 8 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details job is done by contractor. fire blankets in contractor scope. 6. total 50 no. orifice to be open for inspection after clearance same to be box up. 7. before opening system pressure to be ensure. 8. both orifice flange to be open. 9. 3 inch lines is to be cleaned by operation team. 10. if line is jammed then it is to be patch cut and after rodding and cleaning same to be welded back. 11. all open lines to be fixed back with proper gasket <(>&<)> orifice positioning. 12. after inspection from production side same to be box up. 13. during box up new gasket to be use. 14. gasket area to be clean properly. 15. all bolts to be tightened properly. 16. if any leakage same to be attend for that manpower to be ready in 24 hours. 17. orifice flange hot tightening to be done for that manpower to be ready in odd hours also. 18. portable machines is to be shifted before 2 days of shutdown for certification and connection. 19. shifting of all materials required for the job to be shift from work shop or main store to work area. 20. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. 21. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 22. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done by qualified welders approved by am/ns. all welding joints is to be dp tested. dp test consumables are in contractor scope. 23. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 24. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 25. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 26. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. 27. billing qty. will be certifiedas per actual job requirement as per operation team. 28. all joints must be leak proof. any leak must be attended within 1 hour in odd hours. am/ns scope : 1. all permanent materials or any special electrode will be provided 2. power supply, lighting facilities, working platform etc. for workmen at plant site. 3. job certification for executed jobs. 4. electrical certification of tools will be done by am/ns electrical engineer. 5. co ordination for work permit. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. page 9 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. m/s arcelormittal nippon steel india ltd. item note : 6 2000155524 70 60 10 pgc spool,lobe clen&clearance check 6 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 all pgc, tgfc and cgc suction and discharge spool opening, lobe cleaning, clearance checking and box up job . quantum of job : all inlet <(>&<)> outlet line spool opening, cleaning, lobe cleaning, clearance checking <(>&<)> after clearance to be box up. purge gas tapping to be replaced <(>&<)> 9 nos nozzle box to be removed and same to be fixing by nozzle. line size : 900mm spool length : 1500mm (2 nos spools/compressor) total compressor : 6 nos scaffolding up to 10m = total 600m3 at different location. tentative date of shut down : 20th sept. 2024 compressor’s technical details model : gq 22.33, twin lobe type make : aerzen, germany contractor scope : 1. get the work permit/hot work permit entry permit from area site in charge/the control room, get the sign of field controller 2. safety talk/hirac to be carried out for the jobs to all man power. 3. all safety precautions must be followed by the contractor and its technicians. must wear safety belt while performing job. use safety belt and lifeline. work area to be barricaded. as per job, technician must have rigger pass, work at height pass, crane operator pass, welder pass. 4. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 5. 12mm ss wire rope to be used in lifeline, rope to be clamping through clamp. 6. safety belt to be hooked up with permanent structure, if required hook to be fabricated and welded. 7. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged by the contractor. 8. scaffolding in contractor scope for dismantling of tgfc cooler mist eliminator , scaffolding to be fixed then same to be certified by amns engg then green tag to be fixed then scaffolding to be used. all scaffoldings wherever required are to be supplied and erected by contractor with amns work at height pass. work at height pass and ecg report must be required for job as per safety norms. 9. ensure the co ppm before opening the bolt. open the suction spool and discharge spool bolt ensure the compensator bellow gap before opening. 10. before opening suction and discharge spool opening required locking to be done and bottom side support to be fixed and locking stud to be provide. 11. ensure locking of lobe before cleaning. if require fabricate the locking arrangement. 12. clean the both the lobes and casing side wall and casing body by chipping and buffing as per instruction of in charge engineer. 13. flush the lobes and casing by water and rotate the compressor. compressor rotation should be free. for flushing rubber hose is in contractor scope. 14. check all the clearance in compressor and same to be noted down in presence of area incharge. 15. any abnormality noticed during the cleaning and clearance checking page 10 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details to be discussed with in charge engineer. 16. check all the clearance in the compressor along with area engineer and plant rcm team. 17. after clearance from amns representative box up the spool, ensure no any foreign material inside the casing. 18. before spool box up its purge gas tapping to be replaced and some nozzle having box same to be removed and new nozzle to be fixed. 19. box up the spool with new gasket and tightening the bolts. 20. if any leak occurs. rectified immediately on odd hours also. 21. scaffolding to be done at 6 different places approx. 600 m3 22. scaffolding to be done before shutdown of plant. 23. scaffolding approx. 600 m3 is in contractor scope which is to be done before shutdown. 24. after job completion same to be checked with area engineer and then surrounding area housekeeping to be done. 25. shifting of all materials required for the job to be shift from work shop or main store to work area. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. 26. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 27. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done by qualified welders approved by am/ns. all welding joints is to be dp tested. dp test consumables are in contractor scope. 28. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 29. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 30. all scrap to be cut into 1m length and scrap material to be loaded <(>&<)> shifted at specified location as per am/ns engineer. 31. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site, round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 32. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. 33. billing qty. will be certifiedas per actual job requirement as per operation team. am/ns scope : 1. all permanent material <(>&<)> special electrodes to be provide if required. 2. power supply, lighting facilities, working platform, etc. for workmen at plant site 3. job certification for executed jobs. 4. electrical certification will be done by am/ns electrical engineer. 5. co ordination for work permit is in am/ns’s scope. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. for arcelormittal nippon steel inda ltd. page 11 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details item note : 7 2000155524 80 70 10 sgc demister pad replacment job 2 no 20 bsg demister pad replacment job 2 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 seal gas compressor <(>&<)> bottom seal gas compressor demister pad replacement job. quantum of job : 1. seal gas compressor demister pad replacement job. hatch opening <(>&<)> closing, size 1000mm – 2 nos old demister pad removal job, size 800mm – 2 nos new demister pad fixing job, size 800mm – 2 nos (demister pad is in 3 parts) 2. bsg compressor demister pad replacement job. hatch opening <(>&<)> closing, size 500mm – 2 nos old demister pad removal job, size 500mm – 2 nos new demister pad fixing job, size 500mm – 2 nos (demister pad is in 2 parts) tentative date of shut down : 20th sept. 2024 contractor scope : 1. get the work permit/hot work permit from area site in charge/the control room, get the sign of field controller 2. safety talk/hirac to be carried out for the jobs to all man power. 3. all safety precautions must be followed by the contractor and its technicians. must wear safety belt while performing job. use safety belt and lifeline. work area to be barricaded. as per job, technician must have rigger pass, work at height pass, crane operator pass, welder pass. 4. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged by the contractor. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. before opening hatch system pressure to be ensure 7. separator hatch to be open 8. after that inside co and o2 level to be checked. if found ok then inside demister pad to be removed. if required its support to be cut. and then again welding to be done. 9. separator inside cleaning to be done by production. 10. new demister pad to be fixed. all bolt to be tightening. 11. after inspection from production and area engineer hatch to be box up with new gasket. 12. leak test to be done if any leak found same to be attend in odd hours also. 13. portable machines is to be shifted before 2 days of shutdown for certification and connection. 14. shifting of all materials required for the job to be shift from work shop or main store to work area. 15. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. 16. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 17. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done by qualified welders approved by am/ns. all welding joints is to be dp tested. dp test consumables are in contractor scope. 18. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per page 12 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details the instruction of area engineer in charge. 19. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 20. all scrap to be cut into 1m length and scrap material to be loaded <(>&<)> shifted at specified location as per am/ns engineer. 21. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site, round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 22. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope : 1. all permanent material <(>&<)> special electrodes to be provide if required. 2. drinking water, power supply, lighting facilities, working platform, etc. for workmen at plant site 3. job certification for executed jobs. 4. electrical certification will be done by am/ns electrical engineer. 5. free supply of air, water and electricity will be provided at single point. adequate lighting will also be provided. 6. co ordination for work permit is in am/ns’s scope. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. for arcelormittal nippon steel inda ltd. item note : 8 2000155524 90 80 10 reformer tube fsbric bellow relacement 50 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 reformer tube fabric bellow positioning/replacement job. quantum of job : reformer tube detached fabric bellow inspection to be done. if required to positioned or to be replaced by new one as per site engineer instruction. fabric bellow size 9 inch qty. 50 no approx. 9 inch flange opening <(>&<)> closing – 100 no scaffolding up to 10m height – 1800m3 at different location elevation: 4m tentative date of shut down : 20th sept. 2024 contractor scope : 1. get the work permit as per nature of work from site in charge/the control room, to be got sign of field controller and to be sign in as holder by experienced supervisor. 2. safety talk/hirac to be carried out for the jobs to all manpower. smp and hirac no. must be mentioned in work permit. 3. all safety precautions must be followed by the contractor and its manpower. all ppes to be wear as per work nature. use safety belt and lifeline while working at height. work area to be barricaded. 4. as per job nature technician must have rigger pass, work at height pass, eot crane operator pass and welder pass. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. 12mm ss wire rope to be used in lifeline, rope to be clamping through page 13 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details clamp. safety belt to be hooked up with permanent structure, if required hook to be fabricated and welded. 7. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged. 8. scaffolding is in contractor scope with all materials. to be certified by amns engineer. green tag to be fixed and then only scaf folding to be used. work at height pass and ecg report must be required for job as per safety norms. 9. after completion of the job, scaffolding to be removed on priority after site in charge clearance. 10. total 50 nos reformer tube bottom fabric bellow inspection to be done. 11. separate scaffolding for each tube to be done inspection and positioning job. 12. reformer tube bottom fabric bellow is clamped with clamps. 13. clamps to be loosened and fabric bellow to be positioned. 14. once positioning is done then clamps to be tightened. 15. same clamps hot tightening to be done @ 200°c. 16. inspection will be done amns engineer. 17. portable machines is to be shifted before 2 days of shutdown for certification and connection. 18. shifting of all materials required for the job to be shift from work shop or main store to work area. 19. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. 20. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 21. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done by qualified welders approved by am/ns. all welding joints is to be dp tested. dp test consumables are in contractor scope. 22. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 23. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 24. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 25. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope : 1. all permanent materials or any special electrode will be provided 2. power supply, lighting facilities, working platform etc. for workmen at plant site. 3. job certification for executed jobs. 4. electrical certification of tools will be done by am/ns electrical engineer. 5. co ordination for work permit. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any page 14 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details delay in completing the job. m/s arcelormittal nippon steel india ltd. item note : 9 2000155524 110 90 10 reformer tube catalyst dump,seg.&refill 108 no 20 scaffolding with material above 20 mtr 6,000 m3 email : yash.vala@amns.in contact : name : yash vala item details : scope of work for reformer tube old catalyst dumping, segregation and new catalyst refilling job. quantum of job : following step to be followed for new catalyst filling : feed gas, bottom spool to be removed and refixing. counter weight to be down/adjustment and refixing. bottom cannister to be removed, cleaning and refixing. old catalyst to be removed. (tube top cover flange to be open if rodding required for catalyst removal) old catalyst segregation and filling in drum. new catalyst filling after bottom canister fixing. all part to be refixed as earlier. total qty. 108 no scaffolding above 25m – 6000m3 approx. reformer tube size : 9 inch, length – 9.45m approx. bottom spool details : dia.3 inch., 860mm long with 1 side special flange with od 340mm and one side 3 inch wnrf 150# bottom cannister : max. dia. 180mm, 643mm long elevation : 4 to 15m contractor scope : 1. get the work permit as per nature of work from site in charge/the control room, to be got sign of field controller and to be sign in as holder by experienced supervisor. 2. safety talk/hirac to be carried out for the jobs to all manpower. smp and hirac no. must be mentioned in work permit. 3. all safety precautions must be followed by the contractor and its manpower. all ppes to be wear as per work nature. use safety belt and lifeline while working at height. work area to be barricaded. 4. as per job nature technician must have rigger pass, work at height pass, eot crane operator pass and welder pass. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. 12mm ss wire rope to be used in lifeline, rope to be clamping through clamp. safety belt to be hooked up with permanent structure, if required hook to be fabricated and welded. 7. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged. 8. scaffolding is in contractor scope with all materials. to be certified by amns engineer. green tag to be fixed and then only scaf folding to be used. work at height pass and ecg report must be required for job as per safety norms. 9. after completion of the job, scaffolding to be removed on priority after site in charge clearance. 1. before opening system pressure to be ensured 2. 108 no of reformer catalyst tubes to be dumped and refilled again after inspection. 3. 108 no of 3 inch feed gas hose to be dismantled. 4. reformer tube top cover to be opening and closing. 5. bottom spool and bottom canister to be removed. 6. 108 nos. of catalyst tubes top cover and bottom canister to be removed for dumping the tubes. 7. all these 108 reformer tubes counterweight is to be dismantled. 8. catalyst to be segregated and filled along with new catalyst in reformer tubes. 9. bottom spool gasket area to be cleaned and new gasket to be provided. page 15 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 10. same arrangements to be boxed up again. 11. after inspection from production side same to be box up. 12. during box up inside glass wool to be ensure with area engineer. 13. top cover to be box up with new gasket. gasket area to be clean properly. 14. top cover hot tightening to be done 3 times as per production clearance. 15. if any leakage same to be attend for that manpower to be ready in 24 hours. 16. top cover hot tightening to be done for that manpower to be ready in odd hours. 17. portable machines is to be shifted before 2 days of shutdown for certification and connection. 18. shifting of all materials required for the job to be shift from work shop or main store to work area. 19. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 20. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done by qualified welders approved by am/ns. all welding joints is to be dp tested. dp test consumables are in contractor scope. 21. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 22. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 23. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 24. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope : 1. all permanent materials or any special electrode will be provided 2. power supply, lighting facilities, working platform etc. for workmen at plant site. 3. job certification for executed jobs. 4. electrical certification of tools will be done by am/ns electrical engineer. 5. co ordination for work permit. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. m/s arcelormittal nippon steel india ltd. item note : 10 2000155658 20 100 10 fur53pmp suc./dis. v/v,spol op/cln/boxup 4 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 furnace area 53 pump suction and discharge header, line, valve, nrv <(>&<)> spool opening for cleaning and box up job. quantum of job : page 16 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details suction valve (14 inch) – 4 no suction bellow (10 inch) – 4 no suction spool – 4 no discharge valve (10 inch) – 4 no discharge bellow (8 inch) – 4 no discharge nrv (10 inch) – 4 no discharge spool – 4 no discharge header blind opening <(>&<)> closing, 16 inch – 2 no suction header blind opening <(>&<)> closing, 24 inch – 2 no scaffolding up to 10m for discharge line job – 270 m3. working elevation at m6 deck no. 3 – 18m approx. tentative month of shut down : 20th sept. 2024 contractor scope : 1. get the work permit as per nature of work from site in charge/the control room, to be got sign of field controller and to be sign in as holder by experienced supervisor. 2. safety talk/hirac to be carried out for the jobs to all manpower. smp and hirac no. must be mentioned in work permit. 3. all safety precautions must be followed by the contractor and its manpower. all ppes to be wear as per work nature. use safety belt and lifeline while working at height. work area to be barricaded. 4. as per job nature technician must have rigger pass, work at height pass, eot crane operator pass and welder pass. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. 12mm ss wire rope to be used in lifeline, rope to be clamping through clamp. safety belt to be hooked up with permanent structure, if required hook to be fabricated and welded. 7. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged. 8. scaffolding is in contractor scope with all materials. to be certified by amns engineer. green tag to be fixed and then only scaf folding to be used. work at height pass and ecg report must be required for job as per safety norms. 9. after completion of the job, scaffolding to be removed on priority after site in charge clearance. 10. open the all pump suction and discharge spool, valves, nrv as per instruction of am/ns engineer. any damaged valve, spool <(>&<)> bellow to be shifted to scrap yard. 11. the removed valves, spools, bellow and nrv to be cleaned and offered for inspection to amns engg. after inspection by amns engineer it must be fixed back or replaced. 12. as per the instruction of am/ns engineer new valve/nrv to replaced. if removed one found damage or not reusable. otherwise removed one to be fix back. 13. all suction and discharge pipes must be modified, cut, fit up and welded as per new bellow, valves and nrv. all suction and discharge pipe must be straight, and all flanges must be off centre. bellows stud to be adjusted as per area in charge. replace rubber bellow, cutting and welding to be done as per rubber bellow size. rubber bellow and pipeline must be straight and rubber bellow locking stud to be provided with plate and gape must be set as per area in charge. 14. all valves, nrvs, rubber bellows to be replaced, if any item not available, same to be overhauled in contractor scope. 15. suction and discharge spool 2 vent and drain point provision/valve replacement, spool modification to be done as per amns engg if require. 16. the necessary suction and discharge pipe to be cut and fixed back and weld as per amns engg requirement. all line u clamp and support to be fixed after job and locking and lock cutting to be done as per job as per amns egg. 16. if ready to use gaskets are not available, the contractor has to cut the same as per required size from suitable sheets. 17. the all flange joints to be leak proof. any hot tightening required page 17 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details then same to be carried out as per the instruction of amns engineer. 18. shifting of all materials required for the job to be shift from work shop or main store to work area. 19. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods and hydra for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. 20. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 21. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done by qualified welders approved by am/ns. all welding joints is to be dp tested. dp test consumables are in contractor scope. 22. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 23. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 24. all scrap to be cut into 1m length and scrap material to be loaded <(>&<)> shifted at specified location as per am/ns engineer. 4.5 25. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site, round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 26. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope : 1. all permanent material <(>&<)> special electrodes to be provide if required. 2. power supply, lighting facilities, working platform, etc. for workmen at plant site 3. job certification for executed jobs. 4. electrical certification will be done by am/ns electrical engineer. 5. co ordination for work permit is in am/ns’s scope. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. m/s arcelormittal nippon steel india ltd. item note : 11 2000155658 30 110 10 f/c c/hcone partly repl & hard facing 1 no 20 usg,usl&lsl pipe removal & hard facing 1 no 40 charging distributor hard facing job 1 no 50 octopus leg & feed pipe repairing job 1 no 30 tsealbelow,sleve,wearcon remov&hardfcing 1 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 furnace charge hopper cone, usl/usg job, top seal bellow/sleeve/wear cone job, charging distributor hard facing job and octopus leg/feed pipe repairing job. quantum of job. working height : +60m to +75m 1. charge hopper lower cone partly replacement job code details : top dia. – 3.5m, bottom dia. – 1.12m, length – 3.35m, to be replaced. existing cone strengthening to be done by fixing pad and welding as per site engineer instruction. scaffolding above 20m height – 450 m3 approx. page 18 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 1 inch ms spray water line replacement – 10m approx. fabrication of supporting/locking structure – 1 ton approx. 2. usl pipe, usg gate dismantling for replacement/repairing/hard facing and fixing job. all parts to be dismantle and after inspection by amns engineer, new parts to be fixed as per instruction or existing parts repairing and hard facing to be done. usg gate removal for hard facing job and to refix, weight – 2 ton approx. usl pipe (size : od 508mm, 4500mm long) removal. after inspection hard facing to done or if required to be replaced with new pipe. usl gas inlet and outlet line (size : 6 inch) partially replacement – 6m approx. pad fixing on usl and platform erection for hammering purpose. usg all hatch opening, cleaning, and box up and usg gland replacement. 3. top seal bellow, sleeve and wear cone dismantling for hard facing and fixing back. upper seal leg gas inlet cone replacement, weight 1.3 ton approx. upper seal leg bellow (size : id 770mm od 914mm) replacement, weight 250kg. approx. all parts to be dismantle, after inspection done by amns engineer, new parts to be fixed or existing parts hard facing to be done. bellow to be locked properly. bellow inside sleeve pipe to be replaced. during below replacement job all safety precautions to be followed bellow should not damage. otherwise, penalty to be imposed on contractor as per amns. 4. charging distributor hard facing job. after hatch opening and checking, repairing, and hard facing to be done as per amns engg. same hatches to be box up after clearance. 5. octopus leg – 24 no and feed pipe – 24 no repairing job. pipe side 352mm od and length 1200mm same to be repair after inspection by amns engineer all octopus leg nozzle open and after clearance from prod same box up. if any nozzle jammed as per amns engineer, same to be cut and welded. all feed pipe c lock fixing, patch to be welded as per amns eng. tentative month of shut down : 20th sept. 2024 contractor scope : 1. get the work permit as per nature of work from site in charge/the control room, to be got sign of field controller and to be sign in as holder by experienced supervisor. 2. safety talk/hirac to be carried out for the jobs to all manpower. smp and hirac no. must be mentioned in work permit. 3. all safety precautions must be followed by the contractor and its manpower. all ppes to be wear as per work nature. use safety belt and lifeline while working at height. work area to be barricaded. 4. as per job nature technician must have rigger pass, work at height pass, eot crane operator pass and welder pass. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. 12mm ss wire rope to be used in lifeline, rope to be clamping through clamp. safety belt to be hooked up with permanent structure, if required hook to be fabricated and welded. 7. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged. 8. scaffolding is in contractor scope with all materials. to be certified by amns engineer. green tag to be fixed and then only scaf folding to be used. work at height pass and ecg report must be required for job as per page 19 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details safety norms. 9. after completion of the job, scaffolding to be removed on priority after site in charge clearance. 10. proportionating hopper inside area to be cover properly as furnace inside area work is continue going on. 11. before removal of old cone proper locking to be done from charge hopper side and cone bottom side. also new cone assembly to be shifted from store to site. 12. after locking the cone flange joint to be open. existing cone to be removed as per new cone size. as per amns engineer instruction, pad to be fixed and welded. 13. after cone replacement and fit up inspection by amns engineer final welding to be done and hard facing to be done. as per amns engineer instruction. 14. proportionating hopper new/existing wear cone hard facing to be done near workshop and to be shifted at spot by contractor. 15. during shifting of wear cone at spot, charge hopper crane to use if available, if not available then contractor must shift it by proper lifting tools. 16. the upper slide gate is to be locked from all 04 sides. gate to be removed and hard facing to be done then gate to be fixed.usl(top, middle and bottom) pipe to be dropped. 17. bottom bellow to be locked with all safety precautions. 18. bottom seal pipe of upper slide gate to be removed (size 500 mmx length 1280 mm) 19. bottom bellow to be removed. 20. bellow inner sleeve condition to be checked and repair/ replaced. 21. otherwise new sleeve (500 mm dia.x 1050 mm length) to be prepared and replacement to be done. also hard facing to be done. 01 t chain block to be used for sleeve removal. 22. wear cone to be checked and hard facing/ built up to be done, if possible, otherwise replace it with the shifted spool. 01 t chain block to be used for wear cone removal. 23. usl gas inlet cone to be replaced with new one and gas inlet and outlet line to be fixed as per drawing for that required modification to be done. 24. all feed pipe checking/repairing/locking/pad welding to be done as per amns engg. 25. octopus nozzle to be cut/fixing/pad welding as per amns engg. 26. easy flow device hard facing as per amns engg. 27. after replacement/repairing of wear cone/inner sleeve, bellow, usl pipes and usg bottom spool to be re fixed and gate locking to be removed. usl pipe pad to be fixed and welded. 28. new gasket to be fixed and all bolt to be tight. 29. all hatches to be open and after cleaning same to be box up. 30. leak test to be done if any leak found same to be attend. 31. old removed items to be shifted at ground level and same to be cut in 1 meter piece after that send to scrap yard. 32. if ready to use gaskets are not available, the contractor has to cut the same as per required size from suitable sheets. 33. the all flange joints to be leak proof. any hot tightening required then same to be carried out as per the instruction of amns engineer. 34. shifting of all materials required for the job to be shift from work shop or main store to work area. 35. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods and hydra for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. 36. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 37. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done page 20 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details by qualified welders approved by am/ns. all welding joints is to be dp tested. dp test consumables are in contractor scope. 38. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 39. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 40. all scrap to be cut into 1m length and scrap material to be loaded <(>&<)> shifted at specified location as per am/ns engineer. 4.5 41. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site, round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 42. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope : 1. all permanent material <(>&<)> special electrodes to be provide if required. 2. power supply, lighting facilities, working platform, etc. for workmen at plant site 3. job certification for executed jobs. 4. electrical certification will be done by am/ns electrical engineer. 5. co ordination for work permit is in am/ns’s scope. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. m/s arcelormittal nippon steel india ltd. item note : 12 2000155658 40 120 10 m6 f/c lower cone replacement 1 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 furnace lower cone replacement job. quantum of job. working height : +25m to +30m weight : 5 ton approx. ms cutting : 30m approx. ms welding : 60m, (need help of 5 ton chain block 3 no) assemble furnace lower cone with lbf nozzle, keep assembly ready of shaft with braker disc, plummer block, lubrite bush, pocking nozzle, hydraulic cylinder and hydraulic lines as per amns engg. instruction/drawing. ali gnment/leveling to be done after installing. shift furnace lower cone assembly at lbf deck. cone area required nozzle and manhole to be fixed at site as per engineer instruction. marking, cutting and removal existing lower cone assembly as per amns eng. instruction. before removing lower cone, furnace shell and bottom seal cone to be proper locking with 150 mm beam. edge preparation to be done and proper grinding to be done. position and fit up lower cone. alignment to be done of shaft and lower cone. welding and stiffener to be provide as per amns eng instruction. existing lower cone to be cut and scrap. scaffolding above 20m height 450 m3 approx. supporting and locking structure – 1 ton approx. during lower cone replacement job all safety precautions to be followed. hydraulic cylinder should not damage. page 21 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details before starting job mbf all shaft covered with plant/plate and glass wool as safety purpose. contractor scope : 1. get the work permit as per nature of work from site in charge/the control room, to be got sign of field controller and to be sign in as holder by experienced supervisor. 2. safety talk/hirac to be carried out for the jobs to all manpower. smp and hirac no. must be mentioned in work permit. 3. all safety precautions must be followed by the contractor and its manpower. all ppes to be wear as per work nature. use safety belt and lifeline while working at height. work area to be barricaded. 4. as per job nature technician must have rigger pass, work at height pass, eot crane operator pass and welder pass. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. 12mm ss wire rope to be used in lifeline, rope to be clamping through clamp. safety belt to be hooked up with permanent structure, if required hook to be fabricated and welded. 7. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged. 8. scaffolding is in contractor scope with all materials. to be certified by amns engineer. green tag to be fixed and then only scaf folding to be used. work at height pass and ecg report must be required for job as per safety norms. 9. after completion of the job, scaffolding to be removed on priority after site in charge clearance. 10. furnace lower cone before removal locking to be done at mbf deck and bottom seal cone area with min. 150 mm beam. 11. lbf shaft plummer block and cylinder to be removed after cutting/removing breaker disc and kept at side. extra care to be taken for hydraulic cylinder should not damage during removal. 12. lower cone top portion cut from welding joint and bottom side flange joint to be open. 13. lower cone to be removed by chain block. for that proper anchor point to be prepared/provide and same to be certified by authorized person. 14. after cone removal joint area edge preparation to be done. 15. new cone will be supplied in two parts as per availability by rolling machine. 16. new cone nozzle and manhole will be fixed at site as per exiting and as per amns engineer requirements. 17. new cone assembly kept ready for fixing, after edge preparation of new cone. 18. after cone replacement and fit up inspection by amns engineer final welding to be done. 19. lbf shaft to be fixed with new breaker disk and lubrite bush, plummer block. arm and cylinder. 20. shaft leveling same to be inspect with amns engineer. 21. after ensuring leveling, gland addition, arm, link and cylinder will be fix. 22. lbf trial to be taken with area engineer if any rectification observed same to be correct immediately. 23. all welding joint leak test will be done after job completed. if any leak observed same to be attended immediately for that if manpower required in odd hours same to be kept ready by contractor. 24. after all welding joint temporary lock to be removed which was done during removal. 25. old removed items to be shifted at ground level and same to be cut in 1 meter piece after that send to scrap yard. 26. if ready to use gaskets are not available, the contractor has to cut the same as per required size from suitable sheets. 27. the all flange joints to be leak proof. any hot tightening required then same to be carried out as per the instruction of amns engineer. 28. shifting of all materials required for the job to be shift from work page 22 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details shop or main store to work area. 29. necessary lifting tools, tackles, spanners, hammers, hydraulic pumps, jacks gas cutting set <(>&<)> welding machines, welding rods and hydra for the job is in the scope of contractor. (all welding machines should be certified by electrical team before starting the job) any special jigs or fixture required for execution of the job will be in the scope of the contractor with his own material. for tools <(>&<)> tackles valid tpi certification <(>&<)> form 10 to be submit. 30. all consumable like diesel, gas, welding electrode, gauging rods, chain block, cotton waste, emery paper, wire rope / slings, etc. will be in contractors scope. 31. any cutting / welding required will be in contractors scope. contractor should ensure the quality of welding. all welding to be done by qualified welders approved by am/ns. all welding joints is to be dp tested. dp test consumables are in contractor scope. 32. housekeeping should be carried out after completion job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 33. after shutdown any portion of structure/deck cut for the execution of job will be welded back perfectly as earlier. 34. all scrap to be cut into 1m length and scrap material to be loaded <(>&<)> shifted at specified location as per am/ns engineer. 4.5 35. contractor must deploy continue round the clock skilled manpower for the job. safety supervisor must be available on site, round o’clock. contractor should deploy competent supervisor on round the clock basis to supervise and complete the jobs in time. 36. as per management directive, transport/movement of associates to <(>&<)> from for plant should by mandatorily in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope : 1. all permanent material <(>&<)> special electrodes to be provide if required. 2. power supply, lighting facilities, working platform, etc. for workmen at plant site 3. job certification for executed jobs. 4. electrical certification will be done by am/ns electrical engineer. 5. co ordination for work permit is in am/ns’s scope. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. m/s arcelormittal nippon steel india ltd. item note : 13 2000155696 10 130 10 cfc suc. strn/spol op/cln/boxup 1 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 centrifugal compressor suction strainer and spool opening, cleaning <(>&<)> box up job. quantum of job: suction spool flange size: 1000mm suction spool length: 2300mm number of flange joints to be open <(>&<)> close: 02 no working elevation: 1.5m approx. scaffolding up to 10m: 250 m3 contractor scope : 1. get the work permit as per nature of work from site in charge/the control room, to be got sign of field controller and to be sign in as holder by experienced supervisor. 2. safety talk/hirac to be carried out for the jobs to all manpower. smp page 23 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details and hirac no. must be mentioned in work permit. 3. all safety precautions must be followed by the contractor and its manpower. all ppes to be wear as per work nature. use safety belt and lifeline while working at height. work area to be barricaded. 4. as per job nature technician must have rigger pass, work at height pass, eot crane operator pass and welder pass. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. 12mm ss wire rope to be used in lifeline, rope to be clamping through clamp. safety belt to be hooked up with permanent structure, if required hook to be fabricated and welded. 7. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged. 8. scaffolding is in contractor scope with all materials. to be certified by amns engineer. green tag to be fixed and then only scaf folding to be used. work at height pass and ecg report must be required for job as per safety norms. 9. after completion of the job, scaffolding to be removed on priority after site in charge clearance. 10. 3. smp of cfc strainer replacement to be carried out for the jobs to all manpower. smp and hirac no must be mentioned in permit. 11. 4. suction line(1000nb), discharge line(1000nb) and n2 line (2) to be blind/de blind, if required. 12. 5. centrifugal compressor suction spool and strainer to be dropped after proper locking of suction bellow. 13. 6. required scaffolding will be prepared by contractor. 14. 7. suction strainer to be removed from spool for cleaning. eot crane available at vpsa area same can be use if required. 15. 8. strainer to be cleaned by wire brush/buffing machine. 16. 9. guide vane operation checked by production, after amns engineer clearance, same to be box up done. 17. 10. cleaning the gasket area and pasting new gasket. 18. 11. fix the strainer inside spool and box up to be done. ensuring cleaning inside spool before boxed up. 19. 12. leak checking and rectification. 20. 13. bellow lock to be normalized after amns engineer clearance. 21. all tools and tackles and required scaffolding material for the job is under the contractor’s scope. 22. contractors should deploy competent supervisors and safety officers on a round the clock basis to supervise and complete the jobs in time. 23. do necessary correction as per amns engineer if required. 24. housekeeping should be carried out after completion of the job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 25. all tools, tackles like welding machines cutting sets, welding electrode, gauging rods, chain block, slings, spanners, hammers, hydraulic pumps, jacks, etc. will be in contractors scope. 26. all safety items like safety shoes, safety helmets, safety belts, lifeline, fall arrestor, hand gloves etc. are to be arranged by the contractor. 27. as per management directive, transport / movement of associates to <(>&<)> from for plant should be mandatory in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope : 1. all permanent materials or any special electrode will be provided 2. power supply, lighting facilities, working platform etc. for workmen at plant site. 3. job certification for executed jobs. 4. electrical certification of tools will be done by am/ns electrical engineer. 5. co ordination for work permit. specific penalty for non performance by contractor and must be cardinally measured. page 24 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. for arcelormittal nippon steel india ltd. item note : 14 2000155696 20 140 10 tgfc2nd clr lech nozl&elbow op/cln/boxup 1 no email : yash.vala@amns.in contact : name : yash vala item details : scope of work for mod 6 tgfc 2nd stage cooler lechlor nozzle and elbow opening, cleaning <(>&<)> fixing job. quantum of job : lechlor nozzle size – 2 ½ inch, 20 no elbow size – 2 ½ inch, 20 no water header dead end flange opening <(>&<)> closing, size – 12 inch, 4 no inside grating opening <(>&<)> box up – 2 no hatch opening <(>&<)> closing – 28 inch, 2 no elevation: 10m contractor scope : 1. get the work permit as per nature of work from site in charge/the control room, to be got sign of field controller and to be sign in as holder by experienced supervisor. 2. safety talk/hirac to be carried out for the jobs to all manpower. smp and hirac no. must be mentioned in work permit. 3. all safety precautions must be followed by the contractor and its manpower. all ppes to be wear as per work nature. use safety belt and lifeline while working at height. work area to be barricaded. 4. as per job nature technician must have rigger pass, work at height pass, eot crane operator pass and welder pass. 5. before starting the job, the fire extinguisher and water hose have to be arranged and fixed. fire blankets to be kept on site when hot work job is done by contractor. fire blankets in contractor scope. 6. 12mm ss wire rope to be used in lifeline, rope to be clamping through clamp. safety belt to be hooked up with permanent structure, if required hook to be fabricated and welded. 7. all safety rules and precaution of am/ns should be followed by the contractor and his team. all safety items like safety shoes, safety helmets, safety belts, hand gloves etc. are to be arranged. 8. scaffolding is in contractor scope with all materials. to be certified by amns engineer. green tag to be fixed and then only scaf folding to be used. work at height pass and ecg report must be required for job as per safety norms. 9. after completion of the job, scaffolding to be removed on priority after site in charge clearance. 4. all necessary hatches/manhole to be open for entering inside the vessel. 5. check the oxygen/co ppm level inside the vessel. do not enter inside vessel without o2 meter. safety officer must be available for round o’clock for job execution. 6. inside grating to be removed as per requirement and after clearance same to be box up. 7. grating supporting damage beam to be replaced as per instruction. 8. all 20 nos. lechlor nozzle to be removed and cleaning and box up. after cleaning same to be inspected by the operation team and protocol to be signed. 9. all 20 nos. elbow, water header end flanges of cooler to be open and after cleaning, same to be boxed up after inspection and clearance from site engineer. 10. required ss grating to be removed for packing removal/filling and after clearance same to be fixed back and locked. 11. all hatches are to be boxed up after clearance. 12. 01 water hoses required for elbow/nozzle and header cleaning, same will be in contractor’s scope. page 25 of 25 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000118315 date 06.08.2024 submission date 14.08.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. sarjan mahida contact email sarjan.mahida@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 13. contractors should deploy competent supervisors and safety officers on a round the clock basis to supervise and complete the jobs in time. 14. do necessary correction as per amns engineer if required. 15. housekeeping should be carried out after completion of the job. all used / unused material should be brought back to workshop / scrap yard as per the instruction of area engineer in charge. 16. all tools, tackles like welding machines cutting sets, welding electrode, gauging rods, chain block, slings, spanners, hammers, hydraulic pumps, jacks, etc. will be in contractors scope. 17. all safety items like safety shoes, safety helmets, safety belts, lifeline, fall arrestor, hand gloves etc. are to be arranged by the contractor. 18. as per management directive, transport / movement of associates to <(>&<)> from for plant should be mandatory in 4 wheelers and buses. bicycles and two wheelers are strictly not allowed. am/ns scope : 1. all permanent materials or any special electrode will be provided 2. power supply, lighting facilities, working platform etc. for workmen at plant site. 3. job certification for executed jobs. 4. electrical certification of tools will be done by am/ns electrical engineer. 5. co ordination for work permit. specific penalty for non performance by contractor and must be cardinally measured. 1. non conformity of work. 2. penalty will be imposed in case of noncompliance to hse norms. 3. time is essence of the contract and total job shall have to be finished within time allotted. penalty shall be imposed in case of any delay in completing the job. for arcelormittal nippon steel india ltd....